S0410202 転造加工によるSCM415焼結合金歯車の歯元曲げ疲労強度の向上([S041-02]粉末成形とその評価(2),機械材料・材料加工部門)

Translated title of the contribution: S0410202 Effect of Form Rolling on the Improvement of Tooth Root Bending Fatigue Strength for Sintered SCM415 Gears

三浦 秀士, 齋藤 修, 川島 慎太郎, 長田 稔子, 津守 不二夫

Research output: Contribution to journalArticle

Abstract

Sintered materials have been widely used in various industrial fields because of their higher performance properties and lower production costs. However, it has been still difficult to employ sintered material for high strength parts such as transmission gears of vehicle. Since many pores remain in the sintered body, resulted in lower fatigue strength. In this paper, rolling process is applied to sintered SCM415 gear to overcome this issue. Tooth surface on the sintered gear was densified by the rolling process. The surface area is the most critical parts of the gear, so that fatigue strength of the gear could be improved by the densification. As a result of the densification process, higher fatigue strength as same as that of wrought material was obtained.
Translated title of the contributionS0410202 Effect of Form Rolling on the Improvement of Tooth Root Bending Fatigue Strength for Sintered SCM415 Gears
Original languageJapanese
Pages (from-to)_S0410202--_S0410202-
Journal年次大会
Volume2014
Issue number0
DOIs
Publication statusPublished - 2014

Fingerprint Dive into the research topics of 'S0410202 Effect of Form Rolling on the Improvement of Tooth Root Bending Fatigue Strength for Sintered SCM415 Gears'. Together they form a unique fingerprint.

Cite this