Scanning measurement and evaluation of gear tooth root and bottom profiles

Syuhei Kurokawa, Hiromitsu Kido, Tetsuya Taguchi, Tatsuki Okada, Osamu Ohnishi, Toshiro Doi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Tooth root and bottom profiles of cylindrical gears affect bending fatigue life, but it is hard to measure them with conventional gear measuring machines (GMMs), because GMMs are normally customized to measure only gear working flanks. We try to develop a new type of GMM by installing an extra 3D scanning probe and control software to measure tooth root and bottom profiles. To be able to measure in various directions, a 3D scanning probe instead of a single directional scanning probe has been attached to a GMM developed, which has servo and linear driving motors generating less heat. Discrete point measurement and scanning measurement of tooth root and bottom profiles of cylindrical gears is described and evaluation of measured results is discussed.

Original languageEnglish
Title of host publicationAdvances in Power Transmission Science and Technology
Pages838-841
Number of pages4
DOIs
Publication statusPublished - Sep 20 2011
EventInternational Conference on Power Transmission, ICPT 2011 - Xi'an, China
Duration: Oct 25 2011Oct 29 2011

Publication series

NameApplied Mechanics and Materials
Volume86
ISSN (Print)1660-9336
ISSN (Electronic)1662-7482

Other

OtherInternational Conference on Power Transmission, ICPT 2011
CountryChina
CityXi'an
Period10/25/1110/29/11

Fingerprint

Gear teeth
Gears
Scanning
Fatigue of materials

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Kurokawa, S., Kido, H., Taguchi, T., Okada, T., Ohnishi, O., & Doi, T. (2011). Scanning measurement and evaluation of gear tooth root and bottom profiles. In Advances in Power Transmission Science and Technology (pp. 838-841). (Applied Mechanics and Materials; Vol. 86). https://doi.org/10.4028/www.scientific.net/AMM.86.838

Scanning measurement and evaluation of gear tooth root and bottom profiles. / Kurokawa, Syuhei; Kido, Hiromitsu; Taguchi, Tetsuya; Okada, Tatsuki; Ohnishi, Osamu; Doi, Toshiro.

Advances in Power Transmission Science and Technology. 2011. p. 838-841 (Applied Mechanics and Materials; Vol. 86).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kurokawa, S, Kido, H, Taguchi, T, Okada, T, Ohnishi, O & Doi, T 2011, Scanning measurement and evaluation of gear tooth root and bottom profiles. in Advances in Power Transmission Science and Technology. Applied Mechanics and Materials, vol. 86, pp. 838-841, International Conference on Power Transmission, ICPT 2011, Xi'an, China, 10/25/11. https://doi.org/10.4028/www.scientific.net/AMM.86.838
Kurokawa S, Kido H, Taguchi T, Okada T, Ohnishi O, Doi T. Scanning measurement and evaluation of gear tooth root and bottom profiles. In Advances in Power Transmission Science and Technology. 2011. p. 838-841. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.86.838
Kurokawa, Syuhei ; Kido, Hiromitsu ; Taguchi, Tetsuya ; Okada, Tatsuki ; Ohnishi, Osamu ; Doi, Toshiro. / Scanning measurement and evaluation of gear tooth root and bottom profiles. Advances in Power Transmission Science and Technology. 2011. pp. 838-841 (Applied Mechanics and Materials).
@inproceedings{fe1f9bbd38f246ad8be2ce531752567e,
title = "Scanning measurement and evaluation of gear tooth root and bottom profiles",
abstract = "Tooth root and bottom profiles of cylindrical gears affect bending fatigue life, but it is hard to measure them with conventional gear measuring machines (GMMs), because GMMs are normally customized to measure only gear working flanks. We try to develop a new type of GMM by installing an extra 3D scanning probe and control software to measure tooth root and bottom profiles. To be able to measure in various directions, a 3D scanning probe instead of a single directional scanning probe has been attached to a GMM developed, which has servo and linear driving motors generating less heat. Discrete point measurement and scanning measurement of tooth root and bottom profiles of cylindrical gears is described and evaluation of measured results is discussed.",
author = "Syuhei Kurokawa and Hiromitsu Kido and Tetsuya Taguchi and Tatsuki Okada and Osamu Ohnishi and Toshiro Doi",
year = "2011",
month = "9",
day = "20",
doi = "10.4028/www.scientific.net/AMM.86.838",
language = "English",
isbn = "9783037852330",
series = "Applied Mechanics and Materials",
pages = "838--841",
booktitle = "Advances in Power Transmission Science and Technology",

}

TY - GEN

T1 - Scanning measurement and evaluation of gear tooth root and bottom profiles

AU - Kurokawa, Syuhei

AU - Kido, Hiromitsu

AU - Taguchi, Tetsuya

AU - Okada, Tatsuki

AU - Ohnishi, Osamu

AU - Doi, Toshiro

PY - 2011/9/20

Y1 - 2011/9/20

N2 - Tooth root and bottom profiles of cylindrical gears affect bending fatigue life, but it is hard to measure them with conventional gear measuring machines (GMMs), because GMMs are normally customized to measure only gear working flanks. We try to develop a new type of GMM by installing an extra 3D scanning probe and control software to measure tooth root and bottom profiles. To be able to measure in various directions, a 3D scanning probe instead of a single directional scanning probe has been attached to a GMM developed, which has servo and linear driving motors generating less heat. Discrete point measurement and scanning measurement of tooth root and bottom profiles of cylindrical gears is described and evaluation of measured results is discussed.

AB - Tooth root and bottom profiles of cylindrical gears affect bending fatigue life, but it is hard to measure them with conventional gear measuring machines (GMMs), because GMMs are normally customized to measure only gear working flanks. We try to develop a new type of GMM by installing an extra 3D scanning probe and control software to measure tooth root and bottom profiles. To be able to measure in various directions, a 3D scanning probe instead of a single directional scanning probe has been attached to a GMM developed, which has servo and linear driving motors generating less heat. Discrete point measurement and scanning measurement of tooth root and bottom profiles of cylindrical gears is described and evaluation of measured results is discussed.

UR - http://www.scopus.com/inward/record.url?scp=80052792350&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052792350&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.86.838

DO - 10.4028/www.scientific.net/AMM.86.838

M3 - Conference contribution

SN - 9783037852330

T3 - Applied Mechanics and Materials

SP - 838

EP - 841

BT - Advances in Power Transmission Science and Technology

ER -