Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites

Shinji Takemoto, Yuko Kusudo, Kanji Tsuru, Satoshi Hayakawa, Akiyoshi Osaka, Seisuke Takashima

Research output: Contribution to journalArticle

67 Citations (Scopus)

Abstract

We examined the blood compatibility and protein adsorption on hydroxyapatite and hydroxy-carbonate apatite. Those apatites were synthesized under a 0, 5, or 15% CO2-containing N2 atmosphere by a wet-chemical method with a strong ammonia alkali solution of calcium nitrate and diammonium hydrogen phosphate (5:3 in molar ratio) and subsequent calcination in the range of 105-700°C. From infrared (IR) analysis, the carbonate ions substituted both phosphate ions and hydroxyl ions in the hydroxyapatite lattice; the intensities of IR bands assignable to phosphate ions and hydroxyl ions were reduced on calcinations. The specific surface areas of synthesized apatites decreased with increasing calcination temperature. Blood-clotting properties were evaluated in terms of active partial thromboplastin time, prothrombin time, and the amount of fibrinogen for the plasma in contact with the apatites, indicating that all the apatites barely influenced the blood clotting system. The apatites were in contact with a solution containing both bovine serum albumin (BSA) and β 2-microglobulin (β2-MG), and the amounts of those proteins adsorbed on them were examined: the amount of absorbed BSA and β2-MG gradually increased with the calcination temperature below 500°C, while it showed a sudden increase when more than 600°C. Hydroxy-carbonate apatite synthesized under a 15% CO2containing N2 atmosphere and calcined below 400°C had the greatest selectivity in adsorbing β2-MG. Thus, a higher selectivity for β2-MG adsorption was empirically correlated to carbonate ions incorporated in the hydroxyapatite lattice.

Original languageEnglish
Pages (from-to)544-551
Number of pages8
JournalJournal of Biomedical Materials Research - Part A
Volume69
Issue number3
DOIs
Publication statusPublished - Jun 1 2004

Fingerprint

Apatites
Apatite
Carbonates
Blood
Calcination
Proteins
Adsorption
Durapatite
Ions
Hydroxyapatite
Bovine Serum Albumin
Phosphates
Infrared radiation
Alkalies
Thromboplastin
Prothrombin
Ammonia
Specific surface area
Contacts (fluid mechanics)
Fibrinogen

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Biomaterials
  • Biomedical Engineering
  • Metals and Alloys

Cite this

Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites. / Takemoto, Shinji; Kusudo, Yuko; Tsuru, Kanji; Hayakawa, Satoshi; Osaka, Akiyoshi; Takashima, Seisuke.

In: Journal of Biomedical Materials Research - Part A, Vol. 69, No. 3, 01.06.2004, p. 544-551.

Research output: Contribution to journalArticle

Takemoto, S, Kusudo, Y, Tsuru, K, Hayakawa, S, Osaka, A & Takashima, S 2004, 'Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites', Journal of Biomedical Materials Research - Part A, vol. 69, no. 3, pp. 544-551. https://doi.org/10.1002/jbm.a.30039
Takemoto, Shinji ; Kusudo, Yuko ; Tsuru, Kanji ; Hayakawa, Satoshi ; Osaka, Akiyoshi ; Takashima, Seisuke. / Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites. In: Journal of Biomedical Materials Research - Part A. 2004 ; Vol. 69, No. 3. pp. 544-551.
@article{3f93812eeba04ea384c798f6e1564bca,
title = "Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites",
abstract = "We examined the blood compatibility and protein adsorption on hydroxyapatite and hydroxy-carbonate apatite. Those apatites were synthesized under a 0, 5, or 15{\%} CO2-containing N2 atmosphere by a wet-chemical method with a strong ammonia alkali solution of calcium nitrate and diammonium hydrogen phosphate (5:3 in molar ratio) and subsequent calcination in the range of 105-700°C. From infrared (IR) analysis, the carbonate ions substituted both phosphate ions and hydroxyl ions in the hydroxyapatite lattice; the intensities of IR bands assignable to phosphate ions and hydroxyl ions were reduced on calcinations. The specific surface areas of synthesized apatites decreased with increasing calcination temperature. Blood-clotting properties were evaluated in terms of active partial thromboplastin time, prothrombin time, and the amount of fibrinogen for the plasma in contact with the apatites, indicating that all the apatites barely influenced the blood clotting system. The apatites were in contact with a solution containing both bovine serum albumin (BSA) and β 2-microglobulin (β2-MG), and the amounts of those proteins adsorbed on them were examined: the amount of absorbed BSA and β2-MG gradually increased with the calcination temperature below 500°C, while it showed a sudden increase when more than 600°C. Hydroxy-carbonate apatite synthesized under a 15{\%} CO2containing N2 atmosphere and calcined below 400°C had the greatest selectivity in adsorbing β2-MG. Thus, a higher selectivity for β2-MG adsorption was empirically correlated to carbonate ions incorporated in the hydroxyapatite lattice.",
author = "Shinji Takemoto and Yuko Kusudo and Kanji Tsuru and Satoshi Hayakawa and Akiyoshi Osaka and Seisuke Takashima",
year = "2004",
month = "6",
day = "1",
doi = "10.1002/jbm.a.30039",
language = "English",
volume = "69",
pages = "544--551",
journal = "Journal of Biomedical Materials Research - Part A",
issn = "1549-3296",
publisher = "John Wiley and Sons Inc.",
number = "3",

}

TY - JOUR

T1 - Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites

AU - Takemoto, Shinji

AU - Kusudo, Yuko

AU - Tsuru, Kanji

AU - Hayakawa, Satoshi

AU - Osaka, Akiyoshi

AU - Takashima, Seisuke

PY - 2004/6/1

Y1 - 2004/6/1

N2 - We examined the blood compatibility and protein adsorption on hydroxyapatite and hydroxy-carbonate apatite. Those apatites were synthesized under a 0, 5, or 15% CO2-containing N2 atmosphere by a wet-chemical method with a strong ammonia alkali solution of calcium nitrate and diammonium hydrogen phosphate (5:3 in molar ratio) and subsequent calcination in the range of 105-700°C. From infrared (IR) analysis, the carbonate ions substituted both phosphate ions and hydroxyl ions in the hydroxyapatite lattice; the intensities of IR bands assignable to phosphate ions and hydroxyl ions were reduced on calcinations. The specific surface areas of synthesized apatites decreased with increasing calcination temperature. Blood-clotting properties were evaluated in terms of active partial thromboplastin time, prothrombin time, and the amount of fibrinogen for the plasma in contact with the apatites, indicating that all the apatites barely influenced the blood clotting system. The apatites were in contact with a solution containing both bovine serum albumin (BSA) and β 2-microglobulin (β2-MG), and the amounts of those proteins adsorbed on them were examined: the amount of absorbed BSA and β2-MG gradually increased with the calcination temperature below 500°C, while it showed a sudden increase when more than 600°C. Hydroxy-carbonate apatite synthesized under a 15% CO2containing N2 atmosphere and calcined below 400°C had the greatest selectivity in adsorbing β2-MG. Thus, a higher selectivity for β2-MG adsorption was empirically correlated to carbonate ions incorporated in the hydroxyapatite lattice.

AB - We examined the blood compatibility and protein adsorption on hydroxyapatite and hydroxy-carbonate apatite. Those apatites were synthesized under a 0, 5, or 15% CO2-containing N2 atmosphere by a wet-chemical method with a strong ammonia alkali solution of calcium nitrate and diammonium hydrogen phosphate (5:3 in molar ratio) and subsequent calcination in the range of 105-700°C. From infrared (IR) analysis, the carbonate ions substituted both phosphate ions and hydroxyl ions in the hydroxyapatite lattice; the intensities of IR bands assignable to phosphate ions and hydroxyl ions were reduced on calcinations. The specific surface areas of synthesized apatites decreased with increasing calcination temperature. Blood-clotting properties were evaluated in terms of active partial thromboplastin time, prothrombin time, and the amount of fibrinogen for the plasma in contact with the apatites, indicating that all the apatites barely influenced the blood clotting system. The apatites were in contact with a solution containing both bovine serum albumin (BSA) and β 2-microglobulin (β2-MG), and the amounts of those proteins adsorbed on them were examined: the amount of absorbed BSA and β2-MG gradually increased with the calcination temperature below 500°C, while it showed a sudden increase when more than 600°C. Hydroxy-carbonate apatite synthesized under a 15% CO2containing N2 atmosphere and calcined below 400°C had the greatest selectivity in adsorbing β2-MG. Thus, a higher selectivity for β2-MG adsorption was empirically correlated to carbonate ions incorporated in the hydroxyapatite lattice.

UR - http://www.scopus.com/inward/record.url?scp=2442716432&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2442716432&partnerID=8YFLogxK

U2 - 10.1002/jbm.a.30039

DO - 10.1002/jbm.a.30039

M3 - Article

C2 - 15127401

AN - SCOPUS:2442716432

VL - 69

SP - 544

EP - 551

JO - Journal of Biomedical Materials Research - Part A

JF - Journal of Biomedical Materials Research - Part A

SN - 1549-3296

IS - 3

ER -