Shielded capacitive power transfer (S-cpt) without secondary side inductors

Suziana Ahmad, Aam Muharam, Reiji Hattori, Anyu Uezu, Tarek M. Mostafa

Research output: Contribution to journalArticlepeer-review

Abstract

In this study, we propose a four-plate structure with two shielding plates to produce shielded capacitive power transfer (S-CPT) at an operating frequency of 6.78 MHz for a 10 W system. By eliminating the inductors at the secondary side to form an asymmetrical topology, an S-CPT system was developed with a class-E power amplifier. Using MATLAB software, analysis was performed to obtain the parameters in the S-CPT system regarding resonance and impedance matching, and the proposed coupler structure was investigated through electric field simulation. The shield plate voltage stability was also investigated by analysing both the simulation and hardware experiment results. A prototype of S-CPT was established to validate the analysis results and to demonstrate the voltage at the shield plate of the proposed coupler structure. The experimental results are in good agreement with the simulation results. The proposed S-CPT exhibits an AC–AC efficiency of 84%, with a 56% voltage ground stability reduction because of implementing a balun.

Original languageEnglish
Article number4590
JournalEnergies
Volume14
Issue number15
DOIs
Publication statusPublished - Aug 2021

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Energy (miscellaneous)
  • Control and Optimization
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Shielded capacitive power transfer (S-cpt) without secondary side inductors'. Together they form a unique fingerprint.

Cite this