SnSb alloy blended with hard carbon as anode for na-ion batteries

Ying Ching Lu; Nikolay Dimov; Shigeto Okada; Thi Hang Bui

doi:10.3390/en11061614

SnSb alloy blended with hard carbon as anode for na-ion batteries

Ying Ching Lu, Nikolay Dimov, Shigeto Okada, Thi Hang Bui

Department of Advanced Device Materials

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Abstract

SnSb binary alloys blended with reduced graphene oxide (SnSb/RGO) or mixtures of SnSb/RGO with hard carbon (SnSb/RGO+HC) were tested as anode materials for sodium-ion batteries. The presence of hard carbon in the SnSb/RGO+HC blend improves its cycle efficiency and rate performance substantially. The synergy between the SnSb/RGO and the hard carbon phase is explained by the buffer action of the hard carbon, preventing SnSb interparticle agglomeration during the repeated recharge cycles. The feasibility of SnSb alloy anode for sodium-ion batteries was confirmed in full cell configuration vs. Na₃V₂(PO₄)₂F₃ cathode.

Original language	English
Article number	en11061614
Journal	Energies
Volume	11
Issue number	6
DOIs	https://doi.org/10.3390/en11061614
Publication status	Published - Jun 2018

All Science Journal Classification (ASJC) codes

Renewable Energy, Sustainability and the Environment
Fuel Technology
Energy Engineering and Power Technology
Energy (miscellaneous)
Control and Optimization
Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.3390/en11061614

Cite this

@article{02299f6b5f4d4294b1ae595c3ff65264,

title = "SnSb alloy blended with hard carbon as anode for na-ion batteries",

abstract = "SnSb binary alloys blended with reduced graphene oxide (SnSb/RGO) or mixtures of SnSb/RGO with hard carbon (SnSb/RGO+HC) were tested as anode materials for sodium-ion batteries. The presence of hard carbon in the SnSb/RGO+HC blend improves its cycle efficiency and rate performance substantially. The synergy between the SnSb/RGO and the hard carbon phase is explained by the buffer action of the hard carbon, preventing SnSb interparticle agglomeration during the repeated recharge cycles. The feasibility of SnSb alloy anode for sodium-ion batteries was confirmed in full cell configuration vs. Na3V2(PO4)2F3 cathode.",

author = "Lu, {Ying Ching} and Nikolay Dimov and Shigeto Okada and Bui, {Thi Hang}",

note = "Funding Information: This work was financially supported by the Elements Science & Technology Projects of MEXT, Japan. Funding Information: Acknowledgments: This work was financially supported by the Elements Science & Technology Projects of MEXT, Japan. Publisher Copyright: {\textcopyright} 2018 by the authors.",

year = "2018",

month = jun,

doi = "10.3390/en11061614",

language = "English",

volume = "11",

journal = "Energies",

issn = "1996-1073",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "6",

}

TY - JOUR

T1 - SnSb alloy blended with hard carbon as anode for na-ion batteries

AU - Lu, Ying Ching

AU - Dimov, Nikolay

AU - Okada, Shigeto

AU - Bui, Thi Hang

N1 - Funding Information: This work was financially supported by the Elements Science & Technology Projects of MEXT, Japan. Funding Information: Acknowledgments: This work was financially supported by the Elements Science & Technology Projects of MEXT, Japan. Publisher Copyright: © 2018 by the authors.

PY - 2018/6

Y1 - 2018/6

N2 - SnSb binary alloys blended with reduced graphene oxide (SnSb/RGO) or mixtures of SnSb/RGO with hard carbon (SnSb/RGO+HC) were tested as anode materials for sodium-ion batteries. The presence of hard carbon in the SnSb/RGO+HC blend improves its cycle efficiency and rate performance substantially. The synergy between the SnSb/RGO and the hard carbon phase is explained by the buffer action of the hard carbon, preventing SnSb interparticle agglomeration during the repeated recharge cycles. The feasibility of SnSb alloy anode for sodium-ion batteries was confirmed in full cell configuration vs. Na3V2(PO4)2F3 cathode.

AB - SnSb binary alloys blended with reduced graphene oxide (SnSb/RGO) or mixtures of SnSb/RGO with hard carbon (SnSb/RGO+HC) were tested as anode materials for sodium-ion batteries. The presence of hard carbon in the SnSb/RGO+HC blend improves its cycle efficiency and rate performance substantially. The synergy between the SnSb/RGO and the hard carbon phase is explained by the buffer action of the hard carbon, preventing SnSb interparticle agglomeration during the repeated recharge cycles. The feasibility of SnSb alloy anode for sodium-ion batteries was confirmed in full cell configuration vs. Na3V2(PO4)2F3 cathode.

UR - http://www.scopus.com/inward/record.url?scp=85049602159&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85049602159&partnerID=8YFLogxK

U2 - 10.3390/en11061614

DO - 10.3390/en11061614

M3 - Article

AN - SCOPUS:85049602159

VL - 11

JO - Energies

JF - Energies

SN - 1996-1073

IS - 6

M1 - en11061614

ER -

SnSb alloy blended with hard carbon as anode for na-ion batteries

Abstract

All Science Journal Classification (ASJC) codes

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this