Source wave analysis of large amplitude acoustic emission in the breaking of glue lines

Research output: Contribution to journalArticle

Abstract

The acoustic emission (AE) source wave analysis was applied to the breaking of the wood with a glue line. Tapered double-cantilever beams were used as the test specimens. In the case of solid wood, the value of critical energy release rate obtained from the released energy in the source wave analysis was in good agreement with that from the fracture load. In the breaking of the glue lines, the ratio of the critical energy release rate from the fracture load to the released energy in the source wave analysis decreased with decreasing the wood failure. On the other hand, the decrease of the ratio can be attributed to the decrease of the fracture strain of glue lines. The above results show that the fracture pattern of the breaking of the glue lines is the interfacial failure in the category for the glue line failure.

Original languageEnglish
Pages (from-to)637-643
Number of pages7
Journalsen'i gakkaishi
Volume43
Issue number12
DOIs
Publication statusPublished - Jan 1 1987
Externally publishedYes

Fingerprint

Glues
Acoustic emissions
Wood
Energy release rate
Cantilever beams

All Science Journal Classification (ASJC) codes

  • Chemical Engineering (miscellaneous)
  • Materials Science (miscellaneous)
  • Polymers and Plastics
  • Industrial and Manufacturing Engineering

Cite this

Source wave analysis of large amplitude acoustic emission in the breaking of glue lines. / Nakao, Tetsuya.

In: sen'i gakkaishi, Vol. 43, No. 12, 01.01.1987, p. 637-643.

Research output: Contribution to journalArticle

@article{09f6e94857e94522bdb0df5fc8e89d29,
title = "Source wave analysis of large amplitude acoustic emission in the breaking of glue lines",
abstract = "The acoustic emission (AE) source wave analysis was applied to the breaking of the wood with a glue line. Tapered double-cantilever beams were used as the test specimens. In the case of solid wood, the value of critical energy release rate obtained from the released energy in the source wave analysis was in good agreement with that from the fracture load. In the breaking of the glue lines, the ratio of the critical energy release rate from the fracture load to the released energy in the source wave analysis decreased with decreasing the wood failure. On the other hand, the decrease of the ratio can be attributed to the decrease of the fracture strain of glue lines. The above results show that the fracture pattern of the breaking of the glue lines is the interfacial failure in the category for the glue line failure.",
author = "Tetsuya Nakao",
year = "1987",
month = "1",
day = "1",
doi = "10.2115/fiber.43.12_637",
language = "English",
volume = "43",
pages = "637--643",
journal = "Sen'i Gakkaishi",
issn = "0037-9875",
publisher = "The Society of Fiber Science and Technology, Japan",
number = "12",

}

TY - JOUR

T1 - Source wave analysis of large amplitude acoustic emission in the breaking of glue lines

AU - Nakao, Tetsuya

PY - 1987/1/1

Y1 - 1987/1/1

N2 - The acoustic emission (AE) source wave analysis was applied to the breaking of the wood with a glue line. Tapered double-cantilever beams were used as the test specimens. In the case of solid wood, the value of critical energy release rate obtained from the released energy in the source wave analysis was in good agreement with that from the fracture load. In the breaking of the glue lines, the ratio of the critical energy release rate from the fracture load to the released energy in the source wave analysis decreased with decreasing the wood failure. On the other hand, the decrease of the ratio can be attributed to the decrease of the fracture strain of glue lines. The above results show that the fracture pattern of the breaking of the glue lines is the interfacial failure in the category for the glue line failure.

AB - The acoustic emission (AE) source wave analysis was applied to the breaking of the wood with a glue line. Tapered double-cantilever beams were used as the test specimens. In the case of solid wood, the value of critical energy release rate obtained from the released energy in the source wave analysis was in good agreement with that from the fracture load. In the breaking of the glue lines, the ratio of the critical energy release rate from the fracture load to the released energy in the source wave analysis decreased with decreasing the wood failure. On the other hand, the decrease of the ratio can be attributed to the decrease of the fracture strain of glue lines. The above results show that the fracture pattern of the breaking of the glue lines is the interfacial failure in the category for the glue line failure.

UR - http://www.scopus.com/inward/record.url?scp=85007765010&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007765010&partnerID=8YFLogxK

U2 - 10.2115/fiber.43.12_637

DO - 10.2115/fiber.43.12_637

M3 - Article

VL - 43

SP - 637

EP - 643

JO - Sen'i Gakkaishi

JF - Sen'i Gakkaishi

SN - 0037-9875

IS - 12

ER -