Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths

Yasuaki Tokudome, Kazuki Nakanishi, Kazuyoshi Kanamori, Koji Fujita, Hirofumi Akamatsu, Teiichi Hanada

Research output: Contribution to journalArticle

64 Citations (Scopus)

Abstract

Detailed nanostructures have been investigated for hierarchically porous alumina aerogels and xerogels prepared from ionic precursors via sol-gel reaction. Starting from AlCl3·6H2O and poly(ethylene oxide) (PEO) dissolved in a H2O/EtOH mixed solvent, monolithic wet gels were synthesized using propylene oxide (PO) as a gelation initiator. Hierarchically porous alumina xerogels and aerogels were obtained after evaporative drying and supercritical drying, respectively. Macroporous structures are formed as a result of phase separation, while interstices between the secondary particles in the micrometer-sized gel skeletons work as mesoporous structures. Alumina xerogels exhibit considerable shrinkage during the evaporative drying process, resulting in relatively small mesopores (from 5.4 to 6.2 nm) regardless of the starting composition. For shrinkage-free alumina aerogels, on the other hand, the median mesopore size changes from 13.9 to 33.1 nm depending on the starting composition; the increases in PEO content and H2O/EtOH volume ratio both contribute to producing smaller mesopores. Small-angle X-ray scattering (SAXS) analysis reveals that variation of median mesopore size can be ascribed to the change in agglomeration state of primary particles. As PEO content and H2O/EtOH ratio increase, secondary particles become small, which results in relatively small mesopores. The results indicate that the agglomeration state of alumina primary particles is influenced by the presence of weakly interacting phase separation inducers such as PEO.

Original languageEnglish
Pages (from-to)506-513
Number of pages8
JournalJournal of Colloid And Interface Science
Volume338
Issue number2
DOIs
Publication statusPublished - Oct 15 2009
Externally publishedYes

Fingerprint

Xerogels
Aerogels
Aluminum Oxide
Polyethylene oxides
Alumina
Drying
Phase separation
Agglomeration
Gels
Gelation
X ray scattering
Chemical analysis
Particles (particulate matter)
Propylene
Sol-gels
Nanostructures
Oxides

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Biomaterials
  • Surfaces, Coatings and Films
  • Colloid and Surface Chemistry

Cite this

Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths. / Tokudome, Yasuaki; Nakanishi, Kazuki; Kanamori, Kazuyoshi; Fujita, Koji; Akamatsu, Hirofumi; Hanada, Teiichi.

In: Journal of Colloid And Interface Science, Vol. 338, No. 2, 15.10.2009, p. 506-513.

Research output: Contribution to journalArticle

Tokudome, Yasuaki ; Nakanishi, Kazuki ; Kanamori, Kazuyoshi ; Fujita, Koji ; Akamatsu, Hirofumi ; Hanada, Teiichi. / Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths. In: Journal of Colloid And Interface Science. 2009 ; Vol. 338, No. 2. pp. 506-513.
@article{e441c85034c54428929a95ad81a88c9e,
title = "Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths",
abstract = "Detailed nanostructures have been investigated for hierarchically porous alumina aerogels and xerogels prepared from ionic precursors via sol-gel reaction. Starting from AlCl3·6H2O and poly(ethylene oxide) (PEO) dissolved in a H2O/EtOH mixed solvent, monolithic wet gels were synthesized using propylene oxide (PO) as a gelation initiator. Hierarchically porous alumina xerogels and aerogels were obtained after evaporative drying and supercritical drying, respectively. Macroporous structures are formed as a result of phase separation, while interstices between the secondary particles in the micrometer-sized gel skeletons work as mesoporous structures. Alumina xerogels exhibit considerable shrinkage during the evaporative drying process, resulting in relatively small mesopores (from 5.4 to 6.2 nm) regardless of the starting composition. For shrinkage-free alumina aerogels, on the other hand, the median mesopore size changes from 13.9 to 33.1 nm depending on the starting composition; the increases in PEO content and H2O/EtOH volume ratio both contribute to producing smaller mesopores. Small-angle X-ray scattering (SAXS) analysis reveals that variation of median mesopore size can be ascribed to the change in agglomeration state of primary particles. As PEO content and H2O/EtOH ratio increase, secondary particles become small, which results in relatively small mesopores. The results indicate that the agglomeration state of alumina primary particles is influenced by the presence of weakly interacting phase separation inducers such as PEO.",
author = "Yasuaki Tokudome and Kazuki Nakanishi and Kazuyoshi Kanamori and Koji Fujita and Hirofumi Akamatsu and Teiichi Hanada",
year = "2009",
month = "10",
day = "15",
doi = "10.1016/j.jcis.2009.06.042",
language = "English",
volume = "338",
pages = "506--513",
journal = "Journal of Colloid and Interface Science",
issn = "0021-9797",
publisher = "Academic Press Inc.",
number = "2",

}

TY - JOUR

T1 - Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths

AU - Tokudome, Yasuaki

AU - Nakanishi, Kazuki

AU - Kanamori, Kazuyoshi

AU - Fujita, Koji

AU - Akamatsu, Hirofumi

AU - Hanada, Teiichi

PY - 2009/10/15

Y1 - 2009/10/15

N2 - Detailed nanostructures have been investigated for hierarchically porous alumina aerogels and xerogels prepared from ionic precursors via sol-gel reaction. Starting from AlCl3·6H2O and poly(ethylene oxide) (PEO) dissolved in a H2O/EtOH mixed solvent, monolithic wet gels were synthesized using propylene oxide (PO) as a gelation initiator. Hierarchically porous alumina xerogels and aerogels were obtained after evaporative drying and supercritical drying, respectively. Macroporous structures are formed as a result of phase separation, while interstices between the secondary particles in the micrometer-sized gel skeletons work as mesoporous structures. Alumina xerogels exhibit considerable shrinkage during the evaporative drying process, resulting in relatively small mesopores (from 5.4 to 6.2 nm) regardless of the starting composition. For shrinkage-free alumina aerogels, on the other hand, the median mesopore size changes from 13.9 to 33.1 nm depending on the starting composition; the increases in PEO content and H2O/EtOH volume ratio both contribute to producing smaller mesopores. Small-angle X-ray scattering (SAXS) analysis reveals that variation of median mesopore size can be ascribed to the change in agglomeration state of primary particles. As PEO content and H2O/EtOH ratio increase, secondary particles become small, which results in relatively small mesopores. The results indicate that the agglomeration state of alumina primary particles is influenced by the presence of weakly interacting phase separation inducers such as PEO.

AB - Detailed nanostructures have been investigated for hierarchically porous alumina aerogels and xerogels prepared from ionic precursors via sol-gel reaction. Starting from AlCl3·6H2O and poly(ethylene oxide) (PEO) dissolved in a H2O/EtOH mixed solvent, monolithic wet gels were synthesized using propylene oxide (PO) as a gelation initiator. Hierarchically porous alumina xerogels and aerogels were obtained after evaporative drying and supercritical drying, respectively. Macroporous structures are formed as a result of phase separation, while interstices between the secondary particles in the micrometer-sized gel skeletons work as mesoporous structures. Alumina xerogels exhibit considerable shrinkage during the evaporative drying process, resulting in relatively small mesopores (from 5.4 to 6.2 nm) regardless of the starting composition. For shrinkage-free alumina aerogels, on the other hand, the median mesopore size changes from 13.9 to 33.1 nm depending on the starting composition; the increases in PEO content and H2O/EtOH volume ratio both contribute to producing smaller mesopores. Small-angle X-ray scattering (SAXS) analysis reveals that variation of median mesopore size can be ascribed to the change in agglomeration state of primary particles. As PEO content and H2O/EtOH ratio increase, secondary particles become small, which results in relatively small mesopores. The results indicate that the agglomeration state of alumina primary particles is influenced by the presence of weakly interacting phase separation inducers such as PEO.

UR - http://www.scopus.com/inward/record.url?scp=68949180190&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68949180190&partnerID=8YFLogxK

U2 - 10.1016/j.jcis.2009.06.042

DO - 10.1016/j.jcis.2009.06.042

M3 - Article

C2 - 19646712

AN - SCOPUS:68949180190

VL - 338

SP - 506

EP - 513

JO - Journal of Colloid and Interface Science

JF - Journal of Colloid and Interface Science

SN - 0021-9797

IS - 2

ER -