Abstract
Mesophase pitch-based short carbon fibers prepared by the melt blown method exhibited diameters 6 to 16 μm distributed along the filament. The transverse surfaces of the thicker and thinner parts of the filament were very different. The thicker part showed a skin/core texture where very thick and long domains run parallel to the core while the thinner one had a PAN-AM texture where sets of straight domains run along the equator. Such unique shapes and textures were prepared through melt blown spinning and different extents of stabilization according to the diameter of the filament.
| Original language | English |
|---|---|
| Pages (from-to) | 741-747 |
| Number of pages | 7 |
| Journal | Carbon |
| Volume | 38 |
| Issue number | 5 |
| DOIs | |
| Publication status | Published - Jan 1 2000 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Chemistry(all)
- Materials Science(all)
Cite this
Structure of melt-blown mesophase pitch-based carbon fiber. / Watanabe, Fumitaka; Korai, Yozo; Mochida, Isao; Nishimura, Yoshiyuki.
In: Carbon, Vol. 38, No. 5, 01.01.2000, p. 741-747.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Structure of melt-blown mesophase pitch-based carbon fiber
AU - Watanabe, Fumitaka
AU - Korai, Yozo
AU - Mochida, Isao
AU - Nishimura, Yoshiyuki
PY - 2000/1/1
Y1 - 2000/1/1
N2 - Mesophase pitch-based short carbon fibers prepared by the melt blown method exhibited diameters 6 to 16 μm distributed along the filament. The transverse surfaces of the thicker and thinner parts of the filament were very different. The thicker part showed a skin/core texture where very thick and long domains run parallel to the core while the thinner one had a PAN-AM texture where sets of straight domains run along the equator. Such unique shapes and textures were prepared through melt blown spinning and different extents of stabilization according to the diameter of the filament.
AB - Mesophase pitch-based short carbon fibers prepared by the melt blown method exhibited diameters 6 to 16 μm distributed along the filament. The transverse surfaces of the thicker and thinner parts of the filament were very different. The thicker part showed a skin/core texture where very thick and long domains run parallel to the core while the thinner one had a PAN-AM texture where sets of straight domains run along the equator. Such unique shapes and textures were prepared through melt blown spinning and different extents of stabilization according to the diameter of the filament.
UR - http://www.scopus.com/inward/record.url?scp=0033893183&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0033893183&partnerID=8YFLogxK
U2 - 10.1016/S0008-6223(99)00148-7
DO - 10.1016/S0008-6223(99)00148-7
M3 - Article
AN - SCOPUS:0033893183
VL - 38
SP - 741
EP - 747
JO - Carbon
JF - Carbon
SN - 0008-6223
IS - 5
ER -