STUDIES OF BOLTED FRICTIONAL-SLIPPAGE DAMPER WITH RUBBER WASHER: Dynamic loading test of friction damper using aluminum alloy sliding plates

Masakazu Terai, Takanori Sato, Tomokazu Yoshioka, Koichi Minami

Research output: Contribution to journalArticle

Abstract

For developing high tension bolted frictional-slippage damper with much higher friction coefficients than conventional ones, the dynamic loading tests were conducted by using the bolted frictional-slippage connection specimens that sandwiched aluminum alloy sliding plates. In addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. As the results, specimens using aluminum alloy sliding plates and rubber washer showed stable frictional slipping behavior. The results of these tests showed that slip coefficient of more than 0.60 for A1050P aluminum sliding plates and invariable slip coefficient of 0.36 for A2017P were confirmed respectively.
Original languageEnglish
Pages (from-to)107-114
Number of pages8
JournalJournal of Structural and Construction Engineering
Volume72
Issue number614
DOIs
Publication statusPublished - 2007

Fingerprint

Washers
Aluminum alloys
Rubber
Friction
Stabilization
Aluminum

Cite this

STUDIES OF BOLTED FRICTIONAL-SLIPPAGE DAMPER WITH RUBBER WASHER : Dynamic loading test of friction damper using aluminum alloy sliding plates. / Terai, Masakazu; Sato, Takanori; Yoshioka, Tomokazu; Minami, Koichi.

In: Journal of Structural and Construction Engineering, Vol. 72, No. 614, 2007, p. 107-114.

Research output: Contribution to journalArticle

@article{960fb0324b604bd29a17cd2e048bf072,
title = "STUDIES OF BOLTED FRICTIONAL-SLIPPAGE DAMPER WITH RUBBER WASHER: Dynamic loading test of friction damper using aluminum alloy sliding plates",
abstract = "For developing high tension bolted frictional-slippage damper with much higher friction coefficients than conventional ones, the dynamic loading tests were conducted by using the bolted frictional-slippage connection specimens that sandwiched aluminum alloy sliding plates. In addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. As the results, specimens using aluminum alloy sliding plates and rubber washer showed stable frictional slipping behavior. The results of these tests showed that slip coefficient of more than 0.60 for A1050P aluminum sliding plates and invariable slip coefficient of 0.36 for A2017P were confirmed respectively.",
author = "Masakazu Terai and Takanori Sato and Tomokazu Yoshioka and Koichi Minami",
year = "2007",
doi = "10.3130/aijs.72.107_1",
language = "English",
volume = "72",
pages = "107--114",
journal = "Journal of Structural and Construction Engineering",
issn = "1340-4202",
publisher = "日本建築学会",
number = "614",

}

TY - JOUR

T1 - STUDIES OF BOLTED FRICTIONAL-SLIPPAGE DAMPER WITH RUBBER WASHER

T2 - Dynamic loading test of friction damper using aluminum alloy sliding plates

AU - Terai, Masakazu

AU - Sato, Takanori

AU - Yoshioka, Tomokazu

AU - Minami, Koichi

PY - 2007

Y1 - 2007

N2 - For developing high tension bolted frictional-slippage damper with much higher friction coefficients than conventional ones, the dynamic loading tests were conducted by using the bolted frictional-slippage connection specimens that sandwiched aluminum alloy sliding plates. In addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. As the results, specimens using aluminum alloy sliding plates and rubber washer showed stable frictional slipping behavior. The results of these tests showed that slip coefficient of more than 0.60 for A1050P aluminum sliding plates and invariable slip coefficient of 0.36 for A2017P were confirmed respectively.

AB - For developing high tension bolted frictional-slippage damper with much higher friction coefficients than conventional ones, the dynamic loading tests were conducted by using the bolted frictional-slippage connection specimens that sandwiched aluminum alloy sliding plates. In addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. As the results, specimens using aluminum alloy sliding plates and rubber washer showed stable frictional slipping behavior. The results of these tests showed that slip coefficient of more than 0.60 for A1050P aluminum sliding plates and invariable slip coefficient of 0.36 for A2017P were confirmed respectively.

U2 - 10.3130/aijs.72.107_1

DO - 10.3130/aijs.72.107_1

M3 - Article

VL - 72

SP - 107

EP - 114

JO - Journal of Structural and Construction Engineering

JF - Journal of Structural and Construction Engineering

SN - 1340-4202

IS - 614

ER -