Study of RuNi/TiO2 catalysts for selective CO methanation

Shohei Tada, Ryuji Kikuchi, Atsushi Takagaki, Takashi Sugawara, S. Ted Oyama, Kohei Urasaki, Shigeo Satokawa

Research output: Contribution to journalArticle

70 Citations (Scopus)

Abstract

The removal of CO from reformate streams by selective CO methanation was investigated over TiO2 supported RuNi bimetallic and monometallic catalysts. The combination of Ru and Ni enhanced CO methanation at low temperatures. The introduction of Ni into Ru/TiO2 decreased the CO2 conversion rate at 260°C from 10 to 7.3μmolmin-1gcat-1. The use of Ru and Ni, thus, expands the temperature range of selective CO methanation. Transmission electron microscopy and temperature programmed reduction by H2 confirmed that Ru species were in close proximity to Ni species on RuNi/TiO2, indicating a decrease in direct contact between Ru and TiO2. Fourier transform infrared spectroscopy techniques revealed that the decomposition of the formate species, formed during CO2 methanation, is slow over RuNi/TiO2, in contrast to Ru/TiO2.

Original languageEnglish
Pages (from-to)258-264
Number of pages7
JournalApplied Catalysis B: Environmental
Volume140-141
DOIs
Publication statusPublished - Aug 1 2013
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Catalysis
  • Environmental Science(all)
  • Process Chemistry and Technology

Fingerprint Dive into the research topics of 'Study of RuNi/TiO<sub>2</sub> catalysts for selective CO methanation'. Together they form a unique fingerprint.

  • Cite this

    Tada, S., Kikuchi, R., Takagaki, A., Sugawara, T., Oyama, S. T., Urasaki, K., & Satokawa, S. (2013). Study of RuNi/TiO2 catalysts for selective CO methanation. Applied Catalysis B: Environmental, 140-141, 258-264. https://doi.org/10.1016/j.apcatb.2013.04.024