Study on the overlying strata movements and stability control of the retained goaf-side gateroad

Zhiyi Zhang, Hideki Shimada, Takashi Sasaoka, Wen Kai

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Recently, Y type gateroad layout, which is based on a retained gob-side gateroad (RGG), is being widely used for the purposes of optimizing ventilation system, increasing coal recovery rate, etc. The RGG, however, suffers several engineering disturbances including roadway excavation and two adjacent longwall panels mining during its whole serving life, which makes the stability control of this kind of roadway is difficult. In order to have a deep insight of this issue, a novel simulation software referred to as Realistic Failure Process Analysis (RFPA) is employed in present study to analyze the overlying strata movements by which the redistributed stress is induced. And then, three RGG packfillings locations are compared and the most appropriate one is selected. After that, a combined roadway supporting method involving “three-high” rock bolts and novel grouting cable bolts are put forward to maintain the RGG stability. Finally, engineering practice is carried out in the Pan Yidong deep underground coalmine, and the results of field measurements indicate that the RGG supported by the proposed roadway stabilizing method meets all anticipatory mining goals.

Original languageEnglish
Pages (from-to)1-17
Number of pages17
JournalMemoirs of the Faculty of Engineering, Kyushu University
Volume76
Issue number2
Publication statusPublished - Jan 1 2016

Fingerprint

bolt
Bolts
engineering
Grouting
grouting
Excavation
cable
Ventilation
ventilation
excavation
Cables
Rocks
Coal
coal
software
disturbance
Recovery
rock
simulation
method

All Science Journal Classification (ASJC) codes

  • Energy(all)
  • Atmospheric Science
  • Earth and Planetary Sciences(all)
  • Management of Technology and Innovation

Cite this

@article{060269ffdc3d4c4a997cbf531c76d88e,
title = "Study on the overlying strata movements and stability control of the retained goaf-side gateroad",
abstract = "Recently, Y type gateroad layout, which is based on a retained gob-side gateroad (RGG), is being widely used for the purposes of optimizing ventilation system, increasing coal recovery rate, etc. The RGG, however, suffers several engineering disturbances including roadway excavation and two adjacent longwall panels mining during its whole serving life, which makes the stability control of this kind of roadway is difficult. In order to have a deep insight of this issue, a novel simulation software referred to as Realistic Failure Process Analysis (RFPA) is employed in present study to analyze the overlying strata movements by which the redistributed stress is induced. And then, three RGG packfillings locations are compared and the most appropriate one is selected. After that, a combined roadway supporting method involving “three-high” rock bolts and novel grouting cable bolts are put forward to maintain the RGG stability. Finally, engineering practice is carried out in the Pan Yidong deep underground coalmine, and the results of field measurements indicate that the RGG supported by the proposed roadway stabilizing method meets all anticipatory mining goals.",
author = "Zhiyi Zhang and Hideki Shimada and Takashi Sasaoka and Wen Kai",
year = "2016",
month = "1",
day = "1",
language = "English",
volume = "76",
pages = "1--17",
journal = "Memoirs of the Faculty of Engineering, Kyushu University",
issn = "1345-868X",
publisher = "Kyushu University, Faculty of Science",
number = "2",

}

TY - JOUR

T1 - Study on the overlying strata movements and stability control of the retained goaf-side gateroad

AU - Zhang, Zhiyi

AU - Shimada, Hideki

AU - Sasaoka, Takashi

AU - Kai, Wen

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Recently, Y type gateroad layout, which is based on a retained gob-side gateroad (RGG), is being widely used for the purposes of optimizing ventilation system, increasing coal recovery rate, etc. The RGG, however, suffers several engineering disturbances including roadway excavation and two adjacent longwall panels mining during its whole serving life, which makes the stability control of this kind of roadway is difficult. In order to have a deep insight of this issue, a novel simulation software referred to as Realistic Failure Process Analysis (RFPA) is employed in present study to analyze the overlying strata movements by which the redistributed stress is induced. And then, three RGG packfillings locations are compared and the most appropriate one is selected. After that, a combined roadway supporting method involving “three-high” rock bolts and novel grouting cable bolts are put forward to maintain the RGG stability. Finally, engineering practice is carried out in the Pan Yidong deep underground coalmine, and the results of field measurements indicate that the RGG supported by the proposed roadway stabilizing method meets all anticipatory mining goals.

AB - Recently, Y type gateroad layout, which is based on a retained gob-side gateroad (RGG), is being widely used for the purposes of optimizing ventilation system, increasing coal recovery rate, etc. The RGG, however, suffers several engineering disturbances including roadway excavation and two adjacent longwall panels mining during its whole serving life, which makes the stability control of this kind of roadway is difficult. In order to have a deep insight of this issue, a novel simulation software referred to as Realistic Failure Process Analysis (RFPA) is employed in present study to analyze the overlying strata movements by which the redistributed stress is induced. And then, three RGG packfillings locations are compared and the most appropriate one is selected. After that, a combined roadway supporting method involving “three-high” rock bolts and novel grouting cable bolts are put forward to maintain the RGG stability. Finally, engineering practice is carried out in the Pan Yidong deep underground coalmine, and the results of field measurements indicate that the RGG supported by the proposed roadway stabilizing method meets all anticipatory mining goals.

UR - http://www.scopus.com/inward/record.url?scp=84994105967&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84994105967&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84994105967

VL - 76

SP - 1

EP - 17

JO - Memoirs of the Faculty of Engineering, Kyushu University

JF - Memoirs of the Faculty of Engineering, Kyushu University

SN - 1345-868X

IS - 2

ER -