Superplasticity of ultrafine-grained aluminum alloys processed by equal-channel angular pressing

Z. Horita, S. Komura, P. B. Berbon, A. Utsunomiya, M. Furukawa, M. Nemoto, T. G. Langdon

    Research output: Contribution to journalArticlepeer-review

    6 Citations (Scopus)

    Abstract

    It is well established that the addition of dilute amounts of scandium to Al-Mg alloys gives a considerable enhancement in the strength and thermal stability of the material and provides the potential for achieving high tensile elongations. In the present investigation, 0. 2% Sc was added to pure Al and to an AI-3% Mg solid solution alloy and the materials were subjected to equalchannel angular (EGA) pressing to introduce ultrafine grain sizes. This paper describes the microstructural characteristics of these materials after EGA pressing and examines the thermal stability of the microstructures at elevated temperatures. It is shown that the ultrafine-grained structures are stable in both materials up to temperatures of the order of -700 K but high superplastic ductilities are achieved at high strain rates in the Al-3% Mg-0. 2% Sc alloy (e. g. > 1500% elongation at 673 K at 3. 3 x 102 s1) whereas the elongations to failure are low in the Al-0. 2% Sc alloy. The results demonstrate the importance of the presence of a solute, such as Mg, in order to attain superplastic elongations.

    Original languageEnglish
    Pages (from-to)91-96
    Number of pages6
    JournalMaterials Science Forum
    Volume304-306
    Publication statusPublished - Dec 1 1999

    All Science Journal Classification (ASJC) codes

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint

    Dive into the research topics of 'Superplasticity of ultrafine-grained aluminum alloys processed by equal-channel angular pressing'. Together they form a unique fingerprint.

    Cite this