Surface aggregation structure of (fluoroalkyl terminated oligourethane/polyurethane) blend thin films

Masafumi Horiuchi, Ken Kojio, Mutsuhisa Furukawa

Research output: Contribution to conferencePaper

Abstract

Fluoroalkyl terminated oligourethane (FOU) was synthesized with 1,4-butanediol (BD), 4,4'-diphenylmethane diisocyanate (MDI) and 2-(perfluorooctyl) ethanol (PFOE). The (FOU/PU) blend thin films were prepared from the FOU and PU mixed solution onto a silicon wafer by a dip coating method. Surface aggregation structure of the (FOU/PU) blend thin films was investigated using static contact angle measurement, X-ray photoelectron spectroscopy (XPS) and atomic force microscope (AFM). XPS and static contact angle measurement revealed that the FOU with urethane units gradually segregated at the surface with an increasing the FOU content. On the other hand, the FOU without urethane units remarkably segregated to the surface even at the low FOU content. These results clearly suggest that urethane units of the FOU strongly affect on the degree of surface segregation due to the strong interaction with the hard segment of the PU.

Original languageEnglish
Number of pages1
Publication statusPublished - Dec 1 2005
Externally publishedYes
Event54th SPSJ Annual Meeting 2005 - Yokohama, Japan
Duration: May 25 2005May 27 2005

Other

Other54th SPSJ Annual Meeting 2005
CountryJapan
CityYokohama
Period5/25/055/27/05

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Surface aggregation structure of (fluoroalkyl terminated oligourethane/polyurethane) blend thin films'. Together they form a unique fingerprint.

  • Cite this

    Horiuchi, M., Kojio, K., & Furukawa, M. (2005). Surface aggregation structure of (fluoroalkyl terminated oligourethane/polyurethane) blend thin films. Paper presented at 54th SPSJ Annual Meeting 2005, Yokohama, Japan.