Surface molecular aggregation structure and surface properties of poly (fluoroalkyl acrylate) thin films

Koji Honda, Masamichi Morita, Atsushi Takahara

Research output: Contribution to journalReview article

7 Citations (Scopus)

Abstract

Effects of side chain length on the molecular aggregation states and surface properties of poly (fluoroalkyl acrylate) s [PFA-Cy, where y is the fluoromethylene number in Rf group] thin films were systematically investigated. Spin-coated PFA-Cy thin films were characterized by static and dynamic contact angle measurements, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry and wide-angle X-ray diffraction. The receding contact angles showed small values for PFA-Cy with short side chain (y≤6) and increased above y≥ 8. Results revealed that the fluoroalkyl side chain of PFA-Cy with y≥8 was crystallized and formed ordered structures. These results suggest that the water-repellent mechanism of PFA-C, can be attributed to the presence of highly ordered fluoroalkyl side chains at the outermost surfaces. The results of XPS in the dry and hydrated states and contact angle measurement in water support the mechanism of lowering contact angle for water by exposure of carbonyl group to the water interface through reorientation of short fluoroalkyl chains. The surface nanotexture was formed on PFA-C8 through imprinting of anodic aluminum oxide films with a pore diameter of 200 nm. This nanoimprinted surface showed extremely high hydrophobicity as well as high oleophobicity.

Original languageEnglish
Pages (from-to)181-190
Number of pages10
JournalKOBUNSHI RONBUNSHU
Volume64
Issue number4
DOIs
Publication statusPublished - Apr 1 2007

Fingerprint

Contact angle
Surface properties
Agglomeration
Thin films
Water
Angle measurement
X-ray spectroscopy
X ray photoelectron spectroscopy
water
imprinting
Aluminum Oxide
calorimetry
hydrophobicity
Hydrophobicity
Chain length
aluminum oxide
Oxide films
Differential scanning calorimetry
X-ray diffraction
Aluminum

All Science Journal Classification (ASJC) codes

  • Chemical Engineering (miscellaneous)
  • Materials Science (miscellaneous)
  • Environmental Science(all)
  • Polymers and Plastics

Cite this

Surface molecular aggregation structure and surface properties of poly (fluoroalkyl acrylate) thin films. / Honda, Koji; Morita, Masamichi; Takahara, Atsushi.

In: KOBUNSHI RONBUNSHU, Vol. 64, No. 4, 01.04.2007, p. 181-190.

Research output: Contribution to journalReview article

@article{c748879996264e908ad62901b5074e0a,
title = "Surface molecular aggregation structure and surface properties of poly (fluoroalkyl acrylate) thin films",
abstract = "Effects of side chain length on the molecular aggregation states and surface properties of poly (fluoroalkyl acrylate) s [PFA-Cy, where y is the fluoromethylene number in Rf group] thin films were systematically investigated. Spin-coated PFA-Cy thin films were characterized by static and dynamic contact angle measurements, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry and wide-angle X-ray diffraction. The receding contact angles showed small values for PFA-Cy with short side chain (y≤6) and increased above y≥ 8. Results revealed that the fluoroalkyl side chain of PFA-Cy with y≥8 was crystallized and formed ordered structures. These results suggest that the water-repellent mechanism of PFA-C, can be attributed to the presence of highly ordered fluoroalkyl side chains at the outermost surfaces. The results of XPS in the dry and hydrated states and contact angle measurement in water support the mechanism of lowering contact angle for water by exposure of carbonyl group to the water interface through reorientation of short fluoroalkyl chains. The surface nanotexture was formed on PFA-C8 through imprinting of anodic aluminum oxide films with a pore diameter of 200 nm. This nanoimprinted surface showed extremely high hydrophobicity as well as high oleophobicity.",
author = "Koji Honda and Masamichi Morita and Atsushi Takahara",
year = "2007",
month = "4",
day = "1",
doi = "10.1295/koron.64.181",
language = "English",
volume = "64",
pages = "181--190",
journal = "Kobunshi Ronbunshu",
issn = "0386-2186",
publisher = "The Society of Polymer Science, Japan",
number = "4",

}

TY - JOUR

T1 - Surface molecular aggregation structure and surface properties of poly (fluoroalkyl acrylate) thin films

AU - Honda, Koji

AU - Morita, Masamichi

AU - Takahara, Atsushi

PY - 2007/4/1

Y1 - 2007/4/1

N2 - Effects of side chain length on the molecular aggregation states and surface properties of poly (fluoroalkyl acrylate) s [PFA-Cy, where y is the fluoromethylene number in Rf group] thin films were systematically investigated. Spin-coated PFA-Cy thin films were characterized by static and dynamic contact angle measurements, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry and wide-angle X-ray diffraction. The receding contact angles showed small values for PFA-Cy with short side chain (y≤6) and increased above y≥ 8. Results revealed that the fluoroalkyl side chain of PFA-Cy with y≥8 was crystallized and formed ordered structures. These results suggest that the water-repellent mechanism of PFA-C, can be attributed to the presence of highly ordered fluoroalkyl side chains at the outermost surfaces. The results of XPS in the dry and hydrated states and contact angle measurement in water support the mechanism of lowering contact angle for water by exposure of carbonyl group to the water interface through reorientation of short fluoroalkyl chains. The surface nanotexture was formed on PFA-C8 through imprinting of anodic aluminum oxide films with a pore diameter of 200 nm. This nanoimprinted surface showed extremely high hydrophobicity as well as high oleophobicity.

AB - Effects of side chain length on the molecular aggregation states and surface properties of poly (fluoroalkyl acrylate) s [PFA-Cy, where y is the fluoromethylene number in Rf group] thin films were systematically investigated. Spin-coated PFA-Cy thin films were characterized by static and dynamic contact angle measurements, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry and wide-angle X-ray diffraction. The receding contact angles showed small values for PFA-Cy with short side chain (y≤6) and increased above y≥ 8. Results revealed that the fluoroalkyl side chain of PFA-Cy with y≥8 was crystallized and formed ordered structures. These results suggest that the water-repellent mechanism of PFA-C, can be attributed to the presence of highly ordered fluoroalkyl side chains at the outermost surfaces. The results of XPS in the dry and hydrated states and contact angle measurement in water support the mechanism of lowering contact angle for water by exposure of carbonyl group to the water interface through reorientation of short fluoroalkyl chains. The surface nanotexture was formed on PFA-C8 through imprinting of anodic aluminum oxide films with a pore diameter of 200 nm. This nanoimprinted surface showed extremely high hydrophobicity as well as high oleophobicity.

UR - http://www.scopus.com/inward/record.url?scp=34248327213&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34248327213&partnerID=8YFLogxK

U2 - 10.1295/koron.64.181

DO - 10.1295/koron.64.181

M3 - Review article

AN - SCOPUS:34248327213

VL - 64

SP - 181

EP - 190

JO - Kobunshi Ronbunshu

JF - Kobunshi Ronbunshu

SN - 0386-2186

IS - 4

ER -