Synthesis of iron carbide from hematite pellets with H2-CH4 gas mixture

Makoto Egashira, Takayuki Maeda, Kouki Nishioka, Hiroshi Nakagawa

    Research output: Contribution to journalArticlepeer-review

    8 Citations (Scopus)

    Abstract

    The purpose of this investigation is to examine the effect of properties (porosity, specific surface area, particle size distribution and impurities) of hematite pellets on the synthesis of Fe3C pellets. The experiments were carried out by using six kinds of reagent hematite pellets with H2-CH4 (70:30) gas mixture at 750 °C. The synthesis of Fe3C pellets were confirmed all kinds of hematite pellets except two kinds of ones. One of the most suitable pellets for the synthesis of Fe3C was converted to high purity Fe3C (on XRD level) within about 110 min and the phase was stable at least for 3 h, even though excessive carbon deposited at the surface of pellets. Excessive carbon deposition could be stopped with lowering CH4 concentration to an equilibrium gas composition for Fe3C generation reaction. Two kinds of pellets contained relatively low impurities did not form Fe3C. Such high purity pellets tended to shrink due to sintering during reduction stage, and the structure of reduced iron had much less micro pores. This phenomenon might cause decrease of adsorption sites for CH4 molecule and therefore the enough carbon deposition necessary for Fe3C formation hardly could occur. The correlation between other properties (porosity, particle size distribution) and Fe3C formation was not confirmed in detail.

    Original languageEnglish
    Pages (from-to)375-380
    Number of pages6
    JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    Volume86
    Issue number6
    DOIs
    Publication statusPublished - 2000

    All Science Journal Classification (ASJC) codes

    • Condensed Matter Physics
    • Physical and Theoretical Chemistry
    • Metals and Alloys
    • Materials Chemistry

    Fingerprint Dive into the research topics of 'Synthesis of iron carbide from hematite pellets with H<sub>2</sub>-CH<sub>4</sub> gas mixture'. Together they form a unique fingerprint.

    Cite this