Synthesis of nano-Fe3O4-loaded tubular carbon nanofibers and their application as negative electrodes for Fe/air batteries

Akisuke Ito, Liwei Zhao, Shigeto Okada, Jun Ichi Yamaki

Research output: Contribution to journalArticlepeer-review

44 Citations (Scopus)


Nano-Fe3O4-loaded tubular carbon nanofibers (nano-Fe3O4/TCNFs) were synthesized by adding TCNFs into the high-temperature solution-phase reactions of iron(III) acetylacetonate with 1,2-hexadecanediol in the presence of oleic acid and oleylamine. The morphology and structure of this material were investigated by transmission electron microscopy (TEM) and X-ray diffraction (XRD) measurements. TEM observation clarified that nano-sized Fe3O4 particles with a uniform diameter of several nanometers were distributed and loaded tightly on the TCNF surfaces (inside and outside). After being annealed at 500 °C in Ar gas flow, nano-Fe3O4/TCNFs were used as the active material of negative electrodes for Fe/air batteries. Using an alkaline aqueous electrolyte with K2S additive, a high specific capacity of 786 mAh g -1 and cycling efficiency of 76% at the 30th cycle were obtained. The downsizing of the conductive Fe3O4 nano-particles was considered to have contributed to the good electrochemical properties of the material.

Original languageEnglish
Pages (from-to)8154-8159
Number of pages6
JournalJournal of Power Sources
Issue number19
Publication statusPublished - Oct 1 2011

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Physical and Theoretical Chemistry
  • Electrical and Electronic Engineering


Dive into the research topics of 'Synthesis of nano-Fe<sub>3</sub>O<sub>4</sub>-loaded tubular carbon nanofibers and their application as negative electrodes for Fe/air batteries'. Together they form a unique fingerprint.

Cite this