Temperature dependence of austenite nucleation site on reversion of lath martensite

Nobuo Nakada, Toshihiro Tsuchiyma, Setsuo Takaki, Naoki Miyano

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

The temperature dependence of austenite nucleation behavior within lath martensitic structure was investigated in an ultralow carbon 13%Cr-6%Ni martensitic stainless steel partially reversed at (austenite + ferrite) two phase region. The shape and nucleation site of the reversed austenite grains were varied depending on the reversion temperature; fine acicular austenite grains frequently formed along the lath boundaries at a temperature lower than 915 K, while the granular ones tended to nucleate mainly on the prior austenite grain boundaries at a higher temperature. In order to explain the temperature dependence of nucleation site transition, the difference in energetics of austenite nucleation between the lath boundary and the prior austenite grain boundary was discussed on the basis of the classical nucleation theory and FEM analysis. The calculation of the changes in interfacial energy and elastic strain for austenite nucleation suggested that the lath boundary acts as more preferential nucleation sites for austenite rather than the prior austenite grain boundary to reduce the increment of elastic strain when the reversion temperature is low.

Original languageEnglish
Title of host publicationTHERMEC 2009
Pages3424-3429
Number of pages6
DOIs
Publication statusPublished - Feb 9 2010
Event6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009 - Berlin, Germany
Duration: Aug 25 2009Aug 29 2009

Publication series

NameMaterials Science Forum
Volume638-642
ISSN (Print)0255-5476

Other

Other6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009
CountryGermany
CityBerlin
Period8/25/098/29/09

Fingerprint

austenite
martensite
Martensite
Austenite
Nucleation
nucleation
temperature dependence
Temperature
Grain boundaries
grain boundaries
martensitic stainless steels
Martensitic stainless steel
carbon 13
interfacial energy
Interfacial energy
Ferrite
ferrites
Carbon
Finite element method

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Nakada, N., Tsuchiyma, T., Takaki, S., & Miyano, N. (2010). Temperature dependence of austenite nucleation site on reversion of lath martensite. In THERMEC 2009 (pp. 3424-3429). (Materials Science Forum; Vol. 638-642). https://doi.org/10.4028/www.scientific.net/MSF.638-642.3424

Temperature dependence of austenite nucleation site on reversion of lath martensite. / Nakada, Nobuo; Tsuchiyma, Toshihiro; Takaki, Setsuo; Miyano, Naoki.

THERMEC 2009. 2010. p. 3424-3429 (Materials Science Forum; Vol. 638-642).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nakada, N, Tsuchiyma, T, Takaki, S & Miyano, N 2010, Temperature dependence of austenite nucleation site on reversion of lath martensite. in THERMEC 2009. Materials Science Forum, vol. 638-642, pp. 3424-3429, 6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009, Berlin, Germany, 8/25/09. https://doi.org/10.4028/www.scientific.net/MSF.638-642.3424
Nakada, Nobuo ; Tsuchiyma, Toshihiro ; Takaki, Setsuo ; Miyano, Naoki. / Temperature dependence of austenite nucleation site on reversion of lath martensite. THERMEC 2009. 2010. pp. 3424-3429 (Materials Science Forum).
@inproceedings{f1196101162143f5957af219d322ef79,
title = "Temperature dependence of austenite nucleation site on reversion of lath martensite",
abstract = "The temperature dependence of austenite nucleation behavior within lath martensitic structure was investigated in an ultralow carbon 13{\%}Cr-6{\%}Ni martensitic stainless steel partially reversed at (austenite + ferrite) two phase region. The shape and nucleation site of the reversed austenite grains were varied depending on the reversion temperature; fine acicular austenite grains frequently formed along the lath boundaries at a temperature lower than 915 K, while the granular ones tended to nucleate mainly on the prior austenite grain boundaries at a higher temperature. In order to explain the temperature dependence of nucleation site transition, the difference in energetics of austenite nucleation between the lath boundary and the prior austenite grain boundary was discussed on the basis of the classical nucleation theory and FEM analysis. The calculation of the changes in interfacial energy and elastic strain for austenite nucleation suggested that the lath boundary acts as more preferential nucleation sites for austenite rather than the prior austenite grain boundary to reduce the increment of elastic strain when the reversion temperature is low.",
author = "Nobuo Nakada and Toshihiro Tsuchiyma and Setsuo Takaki and Naoki Miyano",
year = "2010",
month = "2",
day = "9",
doi = "10.4028/www.scientific.net/MSF.638-642.3424",
language = "English",
isbn = "0878492941",
series = "Materials Science Forum",
pages = "3424--3429",
booktitle = "THERMEC 2009",

}

TY - GEN

T1 - Temperature dependence of austenite nucleation site on reversion of lath martensite

AU - Nakada, Nobuo

AU - Tsuchiyma, Toshihiro

AU - Takaki, Setsuo

AU - Miyano, Naoki

PY - 2010/2/9

Y1 - 2010/2/9

N2 - The temperature dependence of austenite nucleation behavior within lath martensitic structure was investigated in an ultralow carbon 13%Cr-6%Ni martensitic stainless steel partially reversed at (austenite + ferrite) two phase region. The shape and nucleation site of the reversed austenite grains were varied depending on the reversion temperature; fine acicular austenite grains frequently formed along the lath boundaries at a temperature lower than 915 K, while the granular ones tended to nucleate mainly on the prior austenite grain boundaries at a higher temperature. In order to explain the temperature dependence of nucleation site transition, the difference in energetics of austenite nucleation between the lath boundary and the prior austenite grain boundary was discussed on the basis of the classical nucleation theory and FEM analysis. The calculation of the changes in interfacial energy and elastic strain for austenite nucleation suggested that the lath boundary acts as more preferential nucleation sites for austenite rather than the prior austenite grain boundary to reduce the increment of elastic strain when the reversion temperature is low.

AB - The temperature dependence of austenite nucleation behavior within lath martensitic structure was investigated in an ultralow carbon 13%Cr-6%Ni martensitic stainless steel partially reversed at (austenite + ferrite) two phase region. The shape and nucleation site of the reversed austenite grains were varied depending on the reversion temperature; fine acicular austenite grains frequently formed along the lath boundaries at a temperature lower than 915 K, while the granular ones tended to nucleate mainly on the prior austenite grain boundaries at a higher temperature. In order to explain the temperature dependence of nucleation site transition, the difference in energetics of austenite nucleation between the lath boundary and the prior austenite grain boundary was discussed on the basis of the classical nucleation theory and FEM analysis. The calculation of the changes in interfacial energy and elastic strain for austenite nucleation suggested that the lath boundary acts as more preferential nucleation sites for austenite rather than the prior austenite grain boundary to reduce the increment of elastic strain when the reversion temperature is low.

UR - http://www.scopus.com/inward/record.url?scp=75849149500&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=75849149500&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.638-642.3424

DO - 10.4028/www.scientific.net/MSF.638-642.3424

M3 - Conference contribution

AN - SCOPUS:75849149500

SN - 0878492941

SN - 9780878492947

T3 - Materials Science Forum

SP - 3424

EP - 3429

BT - THERMEC 2009

ER -