Tensile properties of FRP ply splice structures

Dingding Chen, Manyi Wang, Yueyao Shen, Kazuo Arakawa

Research output: Contribution to conferencePaper

Abstract

When the FRP structure becomes large, it is required to splice two or more plies to meet the size requirement. In order to understand the mechanical property of the FRP ply splice structure and get strong ply splice structures, the tensile properties of three kinds of unidirectional CFRP ply splice structures have been tested in the previous work in [1]. In this paper, another two structures were designed based on the S1 structure in [1], in order to improve the strength of this type of the ply splice structure. Compared with the S1 structure, the difference of the S1-1 structure was that the spliced point of each ply was optimized to extend the distance between the nearest spliced points. In the S1-2 structure, additional two carbon fiber fabrics were attached on each side of the S1-1 structure to restrain the bending of the specimen under a tensile load to improve the tensile strength. The results show that there is no big difference of the tensile strength between S1 and S1-1 structures, however, S1-2 really performs much higher tensile strength.

Original languageEnglish
Publication statusPublished - Jan 1 2017
Event21st International Conference on Composite Materials, ICCM 2017 - Xi'an, China
Duration: Aug 20 2017Aug 25 2017

Other

Other21st International Conference on Composite Materials, ICCM 2017
CountryChina
CityXi'an
Period8/20/178/25/17

Fingerprint

Tensile properties
Tensile strength
Carbon fiber reinforced plastics
Carbon fibers
Loads (forces)
Mechanical properties

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Ceramics and Composites

Cite this

Chen, D., Wang, M., Shen, Y., & Arakawa, K. (2017). Tensile properties of FRP ply splice structures. Paper presented at 21st International Conference on Composite Materials, ICCM 2017, Xi'an, China.

Tensile properties of FRP ply splice structures. / Chen, Dingding; Wang, Manyi; Shen, Yueyao; Arakawa, Kazuo.

2017. Paper presented at 21st International Conference on Composite Materials, ICCM 2017, Xi'an, China.

Research output: Contribution to conferencePaper

Chen, D, Wang, M, Shen, Y & Arakawa, K 2017, 'Tensile properties of FRP ply splice structures' Paper presented at 21st International Conference on Composite Materials, ICCM 2017, Xi'an, China, 8/20/17 - 8/25/17, .
Chen D, Wang M, Shen Y, Arakawa K. Tensile properties of FRP ply splice structures. 2017. Paper presented at 21st International Conference on Composite Materials, ICCM 2017, Xi'an, China.
Chen, Dingding ; Wang, Manyi ; Shen, Yueyao ; Arakawa, Kazuo. / Tensile properties of FRP ply splice structures. Paper presented at 21st International Conference on Composite Materials, ICCM 2017, Xi'an, China.
@conference{7cdfc8c42422420e9a2d3997722081c7,
title = "Tensile properties of FRP ply splice structures",
abstract = "When the FRP structure becomes large, it is required to splice two or more plies to meet the size requirement. In order to understand the mechanical property of the FRP ply splice structure and get strong ply splice structures, the tensile properties of three kinds of unidirectional CFRP ply splice structures have been tested in the previous work in [1]. In this paper, another two structures were designed based on the S1 structure in [1], in order to improve the strength of this type of the ply splice structure. Compared with the S1 structure, the difference of the S1-1 structure was that the spliced point of each ply was optimized to extend the distance between the nearest spliced points. In the S1-2 structure, additional two carbon fiber fabrics were attached on each side of the S1-1 structure to restrain the bending of the specimen under a tensile load to improve the tensile strength. The results show that there is no big difference of the tensile strength between S1 and S1-1 structures, however, S1-2 really performs much higher tensile strength.",
author = "Dingding Chen and Manyi Wang and Yueyao Shen and Kazuo Arakawa",
year = "2017",
month = "1",
day = "1",
language = "English",
note = "21st International Conference on Composite Materials, ICCM 2017 ; Conference date: 20-08-2017 Through 25-08-2017",

}

TY - CONF

T1 - Tensile properties of FRP ply splice structures

AU - Chen, Dingding

AU - Wang, Manyi

AU - Shen, Yueyao

AU - Arakawa, Kazuo

PY - 2017/1/1

Y1 - 2017/1/1

N2 - When the FRP structure becomes large, it is required to splice two or more plies to meet the size requirement. In order to understand the mechanical property of the FRP ply splice structure and get strong ply splice structures, the tensile properties of three kinds of unidirectional CFRP ply splice structures have been tested in the previous work in [1]. In this paper, another two structures were designed based on the S1 structure in [1], in order to improve the strength of this type of the ply splice structure. Compared with the S1 structure, the difference of the S1-1 structure was that the spliced point of each ply was optimized to extend the distance between the nearest spliced points. In the S1-2 structure, additional two carbon fiber fabrics were attached on each side of the S1-1 structure to restrain the bending of the specimen under a tensile load to improve the tensile strength. The results show that there is no big difference of the tensile strength between S1 and S1-1 structures, however, S1-2 really performs much higher tensile strength.

AB - When the FRP structure becomes large, it is required to splice two or more plies to meet the size requirement. In order to understand the mechanical property of the FRP ply splice structure and get strong ply splice structures, the tensile properties of three kinds of unidirectional CFRP ply splice structures have been tested in the previous work in [1]. In this paper, another two structures were designed based on the S1 structure in [1], in order to improve the strength of this type of the ply splice structure. Compared with the S1 structure, the difference of the S1-1 structure was that the spliced point of each ply was optimized to extend the distance between the nearest spliced points. In the S1-2 structure, additional two carbon fiber fabrics were attached on each side of the S1-1 structure to restrain the bending of the specimen under a tensile load to improve the tensile strength. The results show that there is no big difference of the tensile strength between S1 and S1-1 structures, however, S1-2 really performs much higher tensile strength.

UR - http://www.scopus.com/inward/record.url?scp=85053146746&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053146746&partnerID=8YFLogxK

M3 - Paper

ER -