The effect of deformation conditions on the occurrence of fluting at 3-pieces can body making

Masatoshi Aratani, Akio Tosaka, Osamu Furukimi, Takashi Obara, Hideo Kuguminato

    Research output: Contribution to journalArticlepeer-review

    1 Citation (Scopus)

    Abstract

    The continuously annealed tinplate with low carbon chemistry often exhibits the "fluting" trouble which is associated with stretcher strain defect, when it is roll-formed for making a 3-pieces can body. For preventing the occurrence of fluting, the influence of the forming conditions is focused in this study, leading to following results. The "flexor treatment" just prior to roll forming, recognized as effective for solving the problem, is attributable to the reduction of both the yield point elongation and yield strength in the tinplate. Furthermore, the tendency of the fluting occurrence can be drastically decreased by employing high speed or low temperature roll-forming condition. A greater number of stretcher strain pattern on the deformed sheet is introduced by the high speed or low temperature deformation. This, in turn, suppresses clear recognition of the stretcher strain pattern preferably.

    Original languageEnglish
    Pages (from-to)19-24
    Number of pages6
    JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    Volume83
    Issue number4
    DOIs
    Publication statusPublished - 1997

    All Science Journal Classification (ASJC) codes

    • Condensed Matter Physics
    • Physical and Theoretical Chemistry
    • Metals and Alloys
    • Materials Chemistry

    Fingerprint

    Dive into the research topics of 'The effect of deformation conditions on the occurrence of fluting at 3-pieces can body making'. Together they form a unique fingerprint.

    Cite this