The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma

Yusuke Moriyoshi, Yoshiki Shimizu, Takayuki Watanabe

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

B-C-N nanotubes prepared by a flush evaporation method using a dc arc plasma were mainly characterized by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The nanotubes obtained were divided into three types such as carbon-, boron nitride-, and carbon or carbon nanotubes surrounded with boron nitride nanotubes. These types of nanotubes were obtained at higher temperatures than about 3000 K, however, these were not formed at lower temperatures than about 3000K. On the other hand, nanocapsules were formed at all the experimental temperatures and nanocapsules with a homogeneous phase were obtained at lower temperatures than about 3000 K. The effect of additives on the formation of B-C-N nanotubes was not clear. Based on these experimental data depending on temperatures and corresponding microstructures, the formation mechanisms of both nanotubes and nanocapsules were briefly discussed.

Original languageEnglish
Title of host publicationProceedings of the Second International Conference on Processing Materials for Properties
EditorsB. Mishra, C, Yamauchi, B. Mishra, C. Yamauchi
Pages387-392
Number of pages6
Publication statusPublished - 2000
Externally publishedYes
EventProceedings of the Second International Conference on Processing Materials for Properties - San Francisco, CA, United States
Duration: Nov 5 2000Nov 8 2000

Other

OtherProceedings of the Second International Conference on Processing Materials for Properties
CountryUnited States
CitySan Francisco, CA
Period11/5/0011/8/00

Fingerprint

Nanotubes
Boron
Nanocapsules
Nitrogen
Plasmas
Carbon
Boron nitride
Temperature
Electron energy loss spectroscopy
Carbon nanotubes
Evaporation
Transmission electron microscopy
Microstructure

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Moriyoshi, Y., Shimizu, Y., & Watanabe, T. (2000). The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma. In B. Mishra, C. Yamauchi, B. Mishra, & C. Yamauchi (Eds.), Proceedings of the Second International Conference on Processing Materials for Properties (pp. 387-392)

The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma. / Moriyoshi, Yusuke; Shimizu, Yoshiki; Watanabe, Takayuki.

Proceedings of the Second International Conference on Processing Materials for Properties. ed. / B. Mishra; C, Yamauchi; B. Mishra; C. Yamauchi. 2000. p. 387-392.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Moriyoshi, Y, Shimizu, Y & Watanabe, T 2000, The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma. in B Mishra, C Yamauchi, B Mishra & C Yamauchi (eds), Proceedings of the Second International Conference on Processing Materials for Properties. pp. 387-392, Proceedings of the Second International Conference on Processing Materials for Properties, San Francisco, CA, United States, 11/5/00.
Moriyoshi Y, Shimizu Y, Watanabe T. The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma. In Mishra B, Yamauchi C, Mishra B, Yamauchi C, editors, Proceedings of the Second International Conference on Processing Materials for Properties. 2000. p. 387-392
Moriyoshi, Yusuke ; Shimizu, Yoshiki ; Watanabe, Takayuki. / The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma. Proceedings of the Second International Conference on Processing Materials for Properties. editor / B. Mishra ; C, Yamauchi ; B. Mishra ; C. Yamauchi. 2000. pp. 387-392
@inproceedings{ce61702c47b74f609e3f34bf7edb99dc,
title = "The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma",
abstract = "B-C-N nanotubes prepared by a flush evaporation method using a dc arc plasma were mainly characterized by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The nanotubes obtained were divided into three types such as carbon-, boron nitride-, and carbon or carbon nanotubes surrounded with boron nitride nanotubes. These types of nanotubes were obtained at higher temperatures than about 3000 K, however, these were not formed at lower temperatures than about 3000K. On the other hand, nanocapsules were formed at all the experimental temperatures and nanocapsules with a homogeneous phase were obtained at lower temperatures than about 3000 K. The effect of additives on the formation of B-C-N nanotubes was not clear. Based on these experimental data depending on temperatures and corresponding microstructures, the formation mechanisms of both nanotubes and nanocapsules were briefly discussed.",
author = "Yusuke Moriyoshi and Yoshiki Shimizu and Takayuki Watanabe",
year = "2000",
language = "English",
isbn = "087339495X",
pages = "387--392",
editor = "B. Mishra and C, Yamauchi and B. Mishra and C. Yamauchi",
booktitle = "Proceedings of the Second International Conference on Processing Materials for Properties",

}

TY - GEN

T1 - The preparation and characterization of boron-carbon-nitrogen nanotubes by a dc arc plasma

AU - Moriyoshi, Yusuke

AU - Shimizu, Yoshiki

AU - Watanabe, Takayuki

PY - 2000

Y1 - 2000

N2 - B-C-N nanotubes prepared by a flush evaporation method using a dc arc plasma were mainly characterized by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The nanotubes obtained were divided into three types such as carbon-, boron nitride-, and carbon or carbon nanotubes surrounded with boron nitride nanotubes. These types of nanotubes were obtained at higher temperatures than about 3000 K, however, these were not formed at lower temperatures than about 3000K. On the other hand, nanocapsules were formed at all the experimental temperatures and nanocapsules with a homogeneous phase were obtained at lower temperatures than about 3000 K. The effect of additives on the formation of B-C-N nanotubes was not clear. Based on these experimental data depending on temperatures and corresponding microstructures, the formation mechanisms of both nanotubes and nanocapsules were briefly discussed.

AB - B-C-N nanotubes prepared by a flush evaporation method using a dc arc plasma were mainly characterized by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The nanotubes obtained were divided into three types such as carbon-, boron nitride-, and carbon or carbon nanotubes surrounded with boron nitride nanotubes. These types of nanotubes were obtained at higher temperatures than about 3000 K, however, these were not formed at lower temperatures than about 3000K. On the other hand, nanocapsules were formed at all the experimental temperatures and nanocapsules with a homogeneous phase were obtained at lower temperatures than about 3000 K. The effect of additives on the formation of B-C-N nanotubes was not clear. Based on these experimental data depending on temperatures and corresponding microstructures, the formation mechanisms of both nanotubes and nanocapsules were briefly discussed.

UR - http://www.scopus.com/inward/record.url?scp=0034592383&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034592383&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0034592383

SN - 087339495X

SP - 387

EP - 392

BT - Proceedings of the Second International Conference on Processing Materials for Properties

A2 - Mishra, B.

A2 - Yamauchi, C,

A2 - Mishra, B.

A2 - Yamauchi, C.

ER -