Theoretical investigation on the detection ratio of the magnetization in superconducting wires by a saddle-shaped pick-up coil

Masataka Iwakuma, Masahiro Nanri, Masamichi Fukui, Yuzo Fukuda, Kazuhiro Kajikawa, Kazuo Funaki

Research output: Contribution to journalArticle

34 Citations (Scopus)

Abstract

We theoretically investigated the adequate geometrical configuration of a saddle-shaped pick-up coil for the accurate measurement of the ac losses in oxide superconducting thin wires with large anisotropy. Defining the ratio of the apparent signal due to the magnetic moment in sample wires, which is detected by a saddle-shaped pick-up coil, to the actual one as a detection ratio, we calculated the dependences of the detection ratio on the height, width and length of the straight and opening parts of a saddle-shaped pick-up coil. We found out that it is possible to obtain the actual magnetization without compensation by supposing that the effective length of sample wires is equal to that of the straight part of a saddle-shaped pick-up coil and by considering that the signal which is detected by the opening part compensates for the shortage of the signal which is detected by the straight part. Finally, the recommendable dimensions of a saddle-shaped pick-up coil for the measurement of ac losses in currently developed oxide superconducting wires were concretely shown.

Original languageEnglish
Pages (from-to)545-556
Number of pages12
JournalSuperconductor Science and Technology
Volume16
Issue number5
DOIs
Publication statusPublished - May 1 2003

Fingerprint

Superconducting wire
saddles
Magnetization
coils
wire
Wire
magnetization
Oxides
Magnetic moments
Anisotropy
oxides
magnetic moments
anisotropy
configurations

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy (miscellaneous)
  • Condensed Matter Physics
  • Electronic, Optical and Magnetic Materials

Cite this

Theoretical investigation on the detection ratio of the magnetization in superconducting wires by a saddle-shaped pick-up coil. / Iwakuma, Masataka; Nanri, Masahiro; Fukui, Masamichi; Fukuda, Yuzo; Kajikawa, Kazuhiro; Funaki, Kazuo.

In: Superconductor Science and Technology, Vol. 16, No. 5, 01.05.2003, p. 545-556.

Research output: Contribution to journalArticle

@article{85d6c6380809487e82d990c435c0392a,
title = "Theoretical investigation on the detection ratio of the magnetization in superconducting wires by a saddle-shaped pick-up coil",
abstract = "We theoretically investigated the adequate geometrical configuration of a saddle-shaped pick-up coil for the accurate measurement of the ac losses in oxide superconducting thin wires with large anisotropy. Defining the ratio of the apparent signal due to the magnetic moment in sample wires, which is detected by a saddle-shaped pick-up coil, to the actual one as a detection ratio, we calculated the dependences of the detection ratio on the height, width and length of the straight and opening parts of a saddle-shaped pick-up coil. We found out that it is possible to obtain the actual magnetization without compensation by supposing that the effective length of sample wires is equal to that of the straight part of a saddle-shaped pick-up coil and by considering that the signal which is detected by the opening part compensates for the shortage of the signal which is detected by the straight part. Finally, the recommendable dimensions of a saddle-shaped pick-up coil for the measurement of ac losses in currently developed oxide superconducting wires were concretely shown.",
author = "Masataka Iwakuma and Masahiro Nanri and Masamichi Fukui and Yuzo Fukuda and Kazuhiro Kajikawa and Kazuo Funaki",
year = "2003",
month = "5",
day = "1",
doi = "10.1088/0953-2048/16/5/301",
language = "English",
volume = "16",
pages = "545--556",
journal = "Superconductor Science and Technology",
issn = "0953-2048",
publisher = "IOP Publishing Ltd.",
number = "5",

}

TY - JOUR

T1 - Theoretical investigation on the detection ratio of the magnetization in superconducting wires by a saddle-shaped pick-up coil

AU - Iwakuma, Masataka

AU - Nanri, Masahiro

AU - Fukui, Masamichi

AU - Fukuda, Yuzo

AU - Kajikawa, Kazuhiro

AU - Funaki, Kazuo

PY - 2003/5/1

Y1 - 2003/5/1

N2 - We theoretically investigated the adequate geometrical configuration of a saddle-shaped pick-up coil for the accurate measurement of the ac losses in oxide superconducting thin wires with large anisotropy. Defining the ratio of the apparent signal due to the magnetic moment in sample wires, which is detected by a saddle-shaped pick-up coil, to the actual one as a detection ratio, we calculated the dependences of the detection ratio on the height, width and length of the straight and opening parts of a saddle-shaped pick-up coil. We found out that it is possible to obtain the actual magnetization without compensation by supposing that the effective length of sample wires is equal to that of the straight part of a saddle-shaped pick-up coil and by considering that the signal which is detected by the opening part compensates for the shortage of the signal which is detected by the straight part. Finally, the recommendable dimensions of a saddle-shaped pick-up coil for the measurement of ac losses in currently developed oxide superconducting wires were concretely shown.

AB - We theoretically investigated the adequate geometrical configuration of a saddle-shaped pick-up coil for the accurate measurement of the ac losses in oxide superconducting thin wires with large anisotropy. Defining the ratio of the apparent signal due to the magnetic moment in sample wires, which is detected by a saddle-shaped pick-up coil, to the actual one as a detection ratio, we calculated the dependences of the detection ratio on the height, width and length of the straight and opening parts of a saddle-shaped pick-up coil. We found out that it is possible to obtain the actual magnetization without compensation by supposing that the effective length of sample wires is equal to that of the straight part of a saddle-shaped pick-up coil and by considering that the signal which is detected by the opening part compensates for the shortage of the signal which is detected by the straight part. Finally, the recommendable dimensions of a saddle-shaped pick-up coil for the measurement of ac losses in currently developed oxide superconducting wires were concretely shown.

UR - http://www.scopus.com/inward/record.url?scp=0037564577&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0037564577&partnerID=8YFLogxK

U2 - 10.1088/0953-2048/16/5/301

DO - 10.1088/0953-2048/16/5/301

M3 - Article

VL - 16

SP - 545

EP - 556

JO - Superconductor Science and Technology

JF - Superconductor Science and Technology

SN - 0953-2048

IS - 5

ER -