Thermomechanical effects in supercritical binary fluids

Z. Q. Long, P. Zhang, Biao Shen

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Thermomechanical effects, i.e., Piston effect (PE), Soret effect (SE), and Dufour effect (DE), occur in supercritical binary fluids when subjected to boundary thermal perturbation due to the diverging compressibility, vanishing thermal diffusivity and mass diffusion. We numerically study those effects in a 1-D slab with a size of 10 mm by solving a complete set of governing equations, which are derived considering the supercritical hydrodynamics, mass transfer and energy conservation simultaneously. The characteristics of these thermomechanical effects in the supercritical binary fluid and liquid binary fluid on different timescales (acoustic and diffusion timescales) are clarified, respectively. Because of the existence of the strong PE in the supercritical binary fluid, the fluid bulk is heated up uniformly, and the SE appears on both sides simultaneously. The direction of mass diffusion is determined by the relative magnitude between concentration gradient and temperature gradient, i.e., gradient ratio γ, and there is a balance gradient ratio γb in each specific binary fluid under a certain condition. The DE is verified by comparing the results of binary fluid and the corresponding pseudo-pure fluid with the same thermo-physical properties. The DE is considerable in supercritical binary fluid, but negligibly small in liquid ethanol/water binary fluid because of the weak SE. These thermomechanical effects in different binary fluids (including supercritical, liquid and gaseous ones) mainly differ in the relative magnitudes and the traveling speed of thermoacoustic wave.

Original languageEnglish
Pages (from-to)470-484
Number of pages15
JournalInternational Journal of Heat and Mass Transfer
Volume99
DOIs
Publication statusPublished - Aug 1 2016

Fingerprint

binary fluids
Fluids
gradients
Pistons
pistons
Liquids
Thermoacoustics
liquids
Supercritical fluids
Thermal diffusivity
Compressibility
fluids
Thermal gradients
thermophysical properties
energy conservation
thermal diffusivity
Energy conservation
Ethanol
Thermodynamic properties
Mass transfer

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Thermomechanical effects in supercritical binary fluids. / Long, Z. Q.; Zhang, P.; Shen, Biao.

In: International Journal of Heat and Mass Transfer, Vol. 99, 01.08.2016, p. 470-484.

Research output: Contribution to journalArticle

@article{c4c5cb61d4f54a818984c6e59aaab8f8,
title = "Thermomechanical effects in supercritical binary fluids",
abstract = "Thermomechanical effects, i.e., Piston effect (PE), Soret effect (SE), and Dufour effect (DE), occur in supercritical binary fluids when subjected to boundary thermal perturbation due to the diverging compressibility, vanishing thermal diffusivity and mass diffusion. We numerically study those effects in a 1-D slab with a size of 10 mm by solving a complete set of governing equations, which are derived considering the supercritical hydrodynamics, mass transfer and energy conservation simultaneously. The characteristics of these thermomechanical effects in the supercritical binary fluid and liquid binary fluid on different timescales (acoustic and diffusion timescales) are clarified, respectively. Because of the existence of the strong PE in the supercritical binary fluid, the fluid bulk is heated up uniformly, and the SE appears on both sides simultaneously. The direction of mass diffusion is determined by the relative magnitude between concentration gradient and temperature gradient, i.e., gradient ratio γ, and there is a balance gradient ratio γb in each specific binary fluid under a certain condition. The DE is verified by comparing the results of binary fluid and the corresponding pseudo-pure fluid with the same thermo-physical properties. The DE is considerable in supercritical binary fluid, but negligibly small in liquid ethanol/water binary fluid because of the weak SE. These thermomechanical effects in different binary fluids (including supercritical, liquid and gaseous ones) mainly differ in the relative magnitudes and the traveling speed of thermoacoustic wave.",
author = "Long, {Z. Q.} and P. Zhang and Biao Shen",
year = "2016",
month = "8",
day = "1",
doi = "10.1016/j.ijheatmasstransfer.2016.03.104",
language = "English",
volume = "99",
pages = "470--484",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Thermomechanical effects in supercritical binary fluids

AU - Long, Z. Q.

AU - Zhang, P.

AU - Shen, Biao

PY - 2016/8/1

Y1 - 2016/8/1

N2 - Thermomechanical effects, i.e., Piston effect (PE), Soret effect (SE), and Dufour effect (DE), occur in supercritical binary fluids when subjected to boundary thermal perturbation due to the diverging compressibility, vanishing thermal diffusivity and mass diffusion. We numerically study those effects in a 1-D slab with a size of 10 mm by solving a complete set of governing equations, which are derived considering the supercritical hydrodynamics, mass transfer and energy conservation simultaneously. The characteristics of these thermomechanical effects in the supercritical binary fluid and liquid binary fluid on different timescales (acoustic and diffusion timescales) are clarified, respectively. Because of the existence of the strong PE in the supercritical binary fluid, the fluid bulk is heated up uniformly, and the SE appears on both sides simultaneously. The direction of mass diffusion is determined by the relative magnitude between concentration gradient and temperature gradient, i.e., gradient ratio γ, and there is a balance gradient ratio γb in each specific binary fluid under a certain condition. The DE is verified by comparing the results of binary fluid and the corresponding pseudo-pure fluid with the same thermo-physical properties. The DE is considerable in supercritical binary fluid, but negligibly small in liquid ethanol/water binary fluid because of the weak SE. These thermomechanical effects in different binary fluids (including supercritical, liquid and gaseous ones) mainly differ in the relative magnitudes and the traveling speed of thermoacoustic wave.

AB - Thermomechanical effects, i.e., Piston effect (PE), Soret effect (SE), and Dufour effect (DE), occur in supercritical binary fluids when subjected to boundary thermal perturbation due to the diverging compressibility, vanishing thermal diffusivity and mass diffusion. We numerically study those effects in a 1-D slab with a size of 10 mm by solving a complete set of governing equations, which are derived considering the supercritical hydrodynamics, mass transfer and energy conservation simultaneously. The characteristics of these thermomechanical effects in the supercritical binary fluid and liquid binary fluid on different timescales (acoustic and diffusion timescales) are clarified, respectively. Because of the existence of the strong PE in the supercritical binary fluid, the fluid bulk is heated up uniformly, and the SE appears on both sides simultaneously. The direction of mass diffusion is determined by the relative magnitude between concentration gradient and temperature gradient, i.e., gradient ratio γ, and there is a balance gradient ratio γb in each specific binary fluid under a certain condition. The DE is verified by comparing the results of binary fluid and the corresponding pseudo-pure fluid with the same thermo-physical properties. The DE is considerable in supercritical binary fluid, but negligibly small in liquid ethanol/water binary fluid because of the weak SE. These thermomechanical effects in different binary fluids (including supercritical, liquid and gaseous ones) mainly differ in the relative magnitudes and the traveling speed of thermoacoustic wave.

UR - http://www.scopus.com/inward/record.url?scp=84964556281&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964556281&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2016.03.104

DO - 10.1016/j.ijheatmasstransfer.2016.03.104

M3 - Article

VL - 99

SP - 470

EP - 484

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

ER -