Thin ice target for 16O(p,p′) experiment

T. Kawabata, H. Akimune, H. Fujimura, H. Fujita, Y. Fujita, M. Fujiwara, K. Hara, K. Hatanaka, K. Hosono, T. Ishikawa, M. Itoh, J. Kamiya, M. Nakamura, T. Noro, E. Obayashi, H. Sakaguchi, Y. Shimbara, H. Takeda, T. Taki, A. TamiiH. Toyokawa, N. Tsukahara, M. Uchida, H. Ueno, T. Wakasa, K. Yamasaki, Y. Yasuda, H. P. Yoshida, M. Yosoi

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

A method to prepare a windowless, self-supporting and low-cost ice target is described. The produced target was successfully used to measure the spectra of inelastic proton scattering from 16O. An ice target of about 30 mg/cm2 worked stably. The target thickness was monitored for 7 hours by measuring p+p elastic scattering and no meaningful variation of the thickness was observed. No obvious effect of contaminations due to the congelation of residual gases on the target was detected. Since a thin ice target was made, measurements of charged decay particles in coincidence with inelastically scattered particles are possible.

Original languageEnglish
Pages (from-to)171-176
Number of pages6
JournalNuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Volume459
Issue number1-2
DOIs
Publication statusPublished - Feb 21 2001

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Instrumentation

Fingerprint Dive into the research topics of 'Thin ice target for <sup>16</sup>O(p,p′) experiment'. Together they form a unique fingerprint.

  • Cite this

    Kawabata, T., Akimune, H., Fujimura, H., Fujita, H., Fujita, Y., Fujiwara, M., Hara, K., Hatanaka, K., Hosono, K., Ishikawa, T., Itoh, M., Kamiya, J., Nakamura, M., Noro, T., Obayashi, E., Sakaguchi, H., Shimbara, Y., Takeda, H., Taki, T., ... Yosoi, M. (2001). Thin ice target for 16O(p,p′) experiment. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 459(1-2), 171-176. https://doi.org/10.1016/S0168-9002(00)00992-X