Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material

Tram Nguyen Xuan Thanh, Michito Maruta, Kanji Tsuru, Shigeki Matsuya, Kunio Ishikawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

In this study, three-dimensional porous carbonate apatite (CO3Ap) materials with the chemical compositions and structures similar to cancellous bone were produced via phosphorization of porous calcite precursor in hydrothermal condition. In order to make porous calcite precursor, negative replication of polyurethane foam that named as inverse ceramic foam method was conducted. When the polyurethane template occupied within the ceramic solid walls disappeared due to burning at high temperature, interconnected hollow pathways were produced. Polyurethane foam was used as a porogen-template firstly was coated layer by layer with synthetic resin to modify morphology and enlarge thickness of struts so as to expand porous area for satisficing cellular bioactivities. Calcium hydroxide (Ca(OH)2) slurry was then infiltrated into resin coatedpolyurethane foam. Heat treatment in atmosphere of oxygen and carbon dioxide gases was carried out to eliminate polyurethane template and induce carbonation process. Ca(OH)2 was converted to calcite with the internal porous channel architecture simulating polyurethane foam struts network. That interconnected porous calcite was subsequently transformed to CO3Ap with remaining the same macroporous structure through hydrothermal treatment in phosphate solution. The porous CO3Ap materials were implanted in the tibia of Japanese male rabbits and removed after a period of 3 months. The bone formation response of the three-dimensional porous carbonate apatite in vivo has been preliminary studied using micro-computed tomography (μ-CT) scanner. The results showed that the porous implant materials have sufficient mechanical strength to provide structural support during bone remodeling and successfully bond with host bone.

Original languageEnglish
Title of host publication11th International Fatigue Congress
PublisherTrans Tech Publications
Pages1559-1564
Number of pages6
ISBN (Print)9783038350088
DOIs
Publication statusPublished - Jan 1 2014
Event11th International Fatigue Congress, FATIGUE 2014 - Melbourne, VIC, Australia
Duration: Mar 2 2014Mar 7 2014

Publication series

NameAdvanced Materials Research
Volume891-892
ISSN (Print)1022-6680

Other

Other11th International Fatigue Congress, FATIGUE 2014
CountryAustralia
CityMelbourne, VIC
Period3/2/143/7/14

Fingerprint

Apatite
Polyurethanes
Strength of materials
Calcite
Carbonates
Bone
Foams
Struts
Synthetic resins
Ceramic foams
Hydrated lime
Carbonation
Bioactivity
Tomography
Porous materials
Carbon dioxide
Phosphates
Resins
Heat treatment
Oxygen

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Nguyen Xuan Thanh, T., Maruta, M., Tsuru, K., Matsuya, S., & Ishikawa, K. (2014). Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material. In 11th International Fatigue Congress (pp. 1559-1564). (Advanced Materials Research; Vol. 891-892). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/AMR.891-892.1559

Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material. / Nguyen Xuan Thanh, Tram; Maruta, Michito; Tsuru, Kanji; Matsuya, Shigeki; Ishikawa, Kunio.

11th International Fatigue Congress. Trans Tech Publications, 2014. p. 1559-1564 (Advanced Materials Research; Vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nguyen Xuan Thanh, T, Maruta, M, Tsuru, K, Matsuya, S & Ishikawa, K 2014, Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material. in 11th International Fatigue Congress. Advanced Materials Research, vol. 891-892, Trans Tech Publications, pp. 1559-1564, 11th International Fatigue Congress, FATIGUE 2014, Melbourne, VIC, Australia, 3/2/14. https://doi.org/10.4028/www.scientific.net/AMR.891-892.1559
Nguyen Xuan Thanh T, Maruta M, Tsuru K, Matsuya S, Ishikawa K. Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material. In 11th International Fatigue Congress. Trans Tech Publications. 2014. p. 1559-1564. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.891-892.1559
Nguyen Xuan Thanh, Tram ; Maruta, Michito ; Tsuru, Kanji ; Matsuya, Shigeki ; Ishikawa, Kunio. / Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material. 11th International Fatigue Congress. Trans Tech Publications, 2014. pp. 1559-1564 (Advanced Materials Research).
@inproceedings{43337557d0d1404bb8068e7af5779c81,
title = "Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material",
abstract = "In this study, three-dimensional porous carbonate apatite (CO3Ap) materials with the chemical compositions and structures similar to cancellous bone were produced via phosphorization of porous calcite precursor in hydrothermal condition. In order to make porous calcite precursor, negative replication of polyurethane foam that named as inverse ceramic foam method was conducted. When the polyurethane template occupied within the ceramic solid walls disappeared due to burning at high temperature, interconnected hollow pathways were produced. Polyurethane foam was used as a porogen-template firstly was coated layer by layer with synthetic resin to modify morphology and enlarge thickness of struts so as to expand porous area for satisficing cellular bioactivities. Calcium hydroxide (Ca(OH)2) slurry was then infiltrated into resin coatedpolyurethane foam. Heat treatment in atmosphere of oxygen and carbon dioxide gases was carried out to eliminate polyurethane template and induce carbonation process. Ca(OH)2 was converted to calcite with the internal porous channel architecture simulating polyurethane foam struts network. That interconnected porous calcite was subsequently transformed to CO3Ap with remaining the same macroporous structure through hydrothermal treatment in phosphate solution. The porous CO3Ap materials were implanted in the tibia of Japanese male rabbits and removed after a period of 3 months. The bone formation response of the three-dimensional porous carbonate apatite in vivo has been preliminary studied using micro-computed tomography (μ-CT) scanner. The results showed that the porous implant materials have sufficient mechanical strength to provide structural support during bone remodeling and successfully bond with host bone.",
author = "{Nguyen Xuan Thanh}, Tram and Michito Maruta and Kanji Tsuru and Shigeki Matsuya and Kunio Ishikawa",
year = "2014",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/AMR.891-892.1559",
language = "English",
isbn = "9783038350088",
series = "Advanced Materials Research",
publisher = "Trans Tech Publications",
pages = "1559--1564",
booktitle = "11th International Fatigue Congress",
address = "Germany",

}

TY - GEN

T1 - Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material

AU - Nguyen Xuan Thanh, Tram

AU - Maruta, Michito

AU - Tsuru, Kanji

AU - Matsuya, Shigeki

AU - Ishikawa, Kunio

PY - 2014/1/1

Y1 - 2014/1/1

N2 - In this study, three-dimensional porous carbonate apatite (CO3Ap) materials with the chemical compositions and structures similar to cancellous bone were produced via phosphorization of porous calcite precursor in hydrothermal condition. In order to make porous calcite precursor, negative replication of polyurethane foam that named as inverse ceramic foam method was conducted. When the polyurethane template occupied within the ceramic solid walls disappeared due to burning at high temperature, interconnected hollow pathways were produced. Polyurethane foam was used as a porogen-template firstly was coated layer by layer with synthetic resin to modify morphology and enlarge thickness of struts so as to expand porous area for satisficing cellular bioactivities. Calcium hydroxide (Ca(OH)2) slurry was then infiltrated into resin coatedpolyurethane foam. Heat treatment in atmosphere of oxygen and carbon dioxide gases was carried out to eliminate polyurethane template and induce carbonation process. Ca(OH)2 was converted to calcite with the internal porous channel architecture simulating polyurethane foam struts network. That interconnected porous calcite was subsequently transformed to CO3Ap with remaining the same macroporous structure through hydrothermal treatment in phosphate solution. The porous CO3Ap materials were implanted in the tibia of Japanese male rabbits and removed after a period of 3 months. The bone formation response of the three-dimensional porous carbonate apatite in vivo has been preliminary studied using micro-computed tomography (μ-CT) scanner. The results showed that the porous implant materials have sufficient mechanical strength to provide structural support during bone remodeling and successfully bond with host bone.

AB - In this study, three-dimensional porous carbonate apatite (CO3Ap) materials with the chemical compositions and structures similar to cancellous bone were produced via phosphorization of porous calcite precursor in hydrothermal condition. In order to make porous calcite precursor, negative replication of polyurethane foam that named as inverse ceramic foam method was conducted. When the polyurethane template occupied within the ceramic solid walls disappeared due to burning at high temperature, interconnected hollow pathways were produced. Polyurethane foam was used as a porogen-template firstly was coated layer by layer with synthetic resin to modify morphology and enlarge thickness of struts so as to expand porous area for satisficing cellular bioactivities. Calcium hydroxide (Ca(OH)2) slurry was then infiltrated into resin coatedpolyurethane foam. Heat treatment in atmosphere of oxygen and carbon dioxide gases was carried out to eliminate polyurethane template and induce carbonation process. Ca(OH)2 was converted to calcite with the internal porous channel architecture simulating polyurethane foam struts network. That interconnected porous calcite was subsequently transformed to CO3Ap with remaining the same macroporous structure through hydrothermal treatment in phosphate solution. The porous CO3Ap materials were implanted in the tibia of Japanese male rabbits and removed after a period of 3 months. The bone formation response of the three-dimensional porous carbonate apatite in vivo has been preliminary studied using micro-computed tomography (μ-CT) scanner. The results showed that the porous implant materials have sufficient mechanical strength to provide structural support during bone remodeling and successfully bond with host bone.

UR - http://www.scopus.com/inward/record.url?scp=84898921430&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84898921430&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.891-892.1559

DO - 10.4028/www.scientific.net/AMR.891-892.1559

M3 - Conference contribution

SN - 9783038350088

T3 - Advanced Materials Research

SP - 1559

EP - 1564

BT - 11th International Fatigue Congress

PB - Trans Tech Publications

ER -