Trajectory control of incompletely restrained parallel-wire-suspended mechanism based on inverse dynamics

Motoji Yamamoto, Noritaka Yanai, Akira Mohri

Research output: Contribution to journalArticle

78 Citations (Scopus)

Abstract

This paper discusses parallel wire mechanisms where an end-effector of the mechanism is suspended by multiple wires. The mechanisms enable not only three-dimensional (3-D) positioning but also 3-D orienting of the end-effector, unlike typical wire suspension-type mechanisms such as overhead crane. To discuss the parallel-wire-suspended mechanisms generally, two forms of basic dynamic equations are presented. Then the parallel wire mechanisms are classified into two types based on the basic equations. Dynamical properties of the two types of wire-suspended positioning mechanism are discussed. In this paper, one of the wire-suspended mechanism, incompletely restrained-type parallel wire mechanism, is mainly discussed on its inverse dynamics problem and its trajectory control problem. The inverse dynamics problem for the incompletely restrained-type mechanism plays an important role on its control problem, because the mechanism has low stiffness based on incomplete constraints on the suspended object which is governed by its dynamics. The paper proposes an antisway control method for the suspended object. In the method, the inverse dynamics calculation is used for nonlinear dynamics compensation to control the suspended object of the incompletely restrained parallel wire mechanism.

Original languageEnglish
Pages (from-to)840-850
Number of pages11
JournalIEEE Transactions on Robotics
Volume20
Issue number5
DOIs
Publication statusPublished - Oct 1 2004

Fingerprint

Trajectories
Wire
End effectors
Cranes
Stiffness

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

Trajectory control of incompletely restrained parallel-wire-suspended mechanism based on inverse dynamics. / Yamamoto, Motoji; Yanai, Noritaka; Mohri, Akira.

In: IEEE Transactions on Robotics, Vol. 20, No. 5, 01.10.2004, p. 840-850.

Research output: Contribution to journalArticle

@article{b21449604d4e44e1a2c557488ac53cff,
title = "Trajectory control of incompletely restrained parallel-wire-suspended mechanism based on inverse dynamics",
abstract = "This paper discusses parallel wire mechanisms where an end-effector of the mechanism is suspended by multiple wires. The mechanisms enable not only three-dimensional (3-D) positioning but also 3-D orienting of the end-effector, unlike typical wire suspension-type mechanisms such as overhead crane. To discuss the parallel-wire-suspended mechanisms generally, two forms of basic dynamic equations are presented. Then the parallel wire mechanisms are classified into two types based on the basic equations. Dynamical properties of the two types of wire-suspended positioning mechanism are discussed. In this paper, one of the wire-suspended mechanism, incompletely restrained-type parallel wire mechanism, is mainly discussed on its inverse dynamics problem and its trajectory control problem. The inverse dynamics problem for the incompletely restrained-type mechanism plays an important role on its control problem, because the mechanism has low stiffness based on incomplete constraints on the suspended object which is governed by its dynamics. The paper proposes an antisway control method for the suspended object. In the method, the inverse dynamics calculation is used for nonlinear dynamics compensation to control the suspended object of the incompletely restrained parallel wire mechanism.",
author = "Motoji Yamamoto and Noritaka Yanai and Akira Mohri",
year = "2004",
month = "10",
day = "1",
doi = "10.1109/TRO.2004.829501",
language = "English",
volume = "20",
pages = "840--850",
journal = "IEEE Transactions on Robotics",
issn = "1552-3098",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "5",

}

TY - JOUR

T1 - Trajectory control of incompletely restrained parallel-wire-suspended mechanism based on inverse dynamics

AU - Yamamoto, Motoji

AU - Yanai, Noritaka

AU - Mohri, Akira

PY - 2004/10/1

Y1 - 2004/10/1

N2 - This paper discusses parallel wire mechanisms where an end-effector of the mechanism is suspended by multiple wires. The mechanisms enable not only three-dimensional (3-D) positioning but also 3-D orienting of the end-effector, unlike typical wire suspension-type mechanisms such as overhead crane. To discuss the parallel-wire-suspended mechanisms generally, two forms of basic dynamic equations are presented. Then the parallel wire mechanisms are classified into two types based on the basic equations. Dynamical properties of the two types of wire-suspended positioning mechanism are discussed. In this paper, one of the wire-suspended mechanism, incompletely restrained-type parallel wire mechanism, is mainly discussed on its inverse dynamics problem and its trajectory control problem. The inverse dynamics problem for the incompletely restrained-type mechanism plays an important role on its control problem, because the mechanism has low stiffness based on incomplete constraints on the suspended object which is governed by its dynamics. The paper proposes an antisway control method for the suspended object. In the method, the inverse dynamics calculation is used for nonlinear dynamics compensation to control the suspended object of the incompletely restrained parallel wire mechanism.

AB - This paper discusses parallel wire mechanisms where an end-effector of the mechanism is suspended by multiple wires. The mechanisms enable not only three-dimensional (3-D) positioning but also 3-D orienting of the end-effector, unlike typical wire suspension-type mechanisms such as overhead crane. To discuss the parallel-wire-suspended mechanisms generally, two forms of basic dynamic equations are presented. Then the parallel wire mechanisms are classified into two types based on the basic equations. Dynamical properties of the two types of wire-suspended positioning mechanism are discussed. In this paper, one of the wire-suspended mechanism, incompletely restrained-type parallel wire mechanism, is mainly discussed on its inverse dynamics problem and its trajectory control problem. The inverse dynamics problem for the incompletely restrained-type mechanism plays an important role on its control problem, because the mechanism has low stiffness based on incomplete constraints on the suspended object which is governed by its dynamics. The paper proposes an antisway control method for the suspended object. In the method, the inverse dynamics calculation is used for nonlinear dynamics compensation to control the suspended object of the incompletely restrained parallel wire mechanism.

UR - http://www.scopus.com/inward/record.url?scp=10244247721&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=10244247721&partnerID=8YFLogxK

U2 - 10.1109/TRO.2004.829501

DO - 10.1109/TRO.2004.829501

M3 - Article

AN - SCOPUS:10244247721

VL - 20

SP - 840

EP - 850

JO - IEEE Transactions on Robotics

JF - IEEE Transactions on Robotics

SN - 1552-3098

IS - 5

ER -