Transition of phase transformation mechanism by mn addition in high nitrogen austenitic stainless steel

Norimitsu Koga, Michinori Fukuyama, Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki

Research output: Contribution to journalArticle

Abstract

Fe-25Cr-1N-0, 2, 5Mn mass% alloys were subjected to isothermal heat treatment, and their microstructure formation and phase transformation behavior were investigated in order to clarify the effect of Mn addition on the transformation mechanism of high nitrogen austenite. Microstructure observation for the 1073 K heat-treated specimens revealed that the Fe-25Cr-1N alloy exhibited (α+Cr2N) lamellar eutectoid structure, while the Fe-25Cr-1N-2Mn and -5Mn alloys did finer (α′(or retained γ)+Cr2N) lamellar structure as well as (α+Cr2N) lamellar eutectoid structure. It was suggested that the (α′+Cr2N) lamellar structure had been formed through γ1→γ2+Cr2N cellular precipitation followed by martensitic transformation of γ2on cooling to ambient temperature. Nitrogen concentration in untransformed austenite in the Fe-25Cr-1N-2Mn and -5Mn alloys was continuously decreased with progressing of (γ+Cr2N) cellular precipitation due to nitrogen long-range diffusion from untransformed austenite to (γ+Cr2N) cellular structure. As a result of decreased nitrogen concentration in untransformed austenite, transformation mechanism switched from (γ+Cr2N) cellular precipitation to (α+Cr2N) eutectoid transformation.

Original languageEnglish
Pages (from-to)1165-1171
Number of pages7
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume100
Issue number9
DOIs
Publication statusPublished - Jan 1 2014

Fingerprint

austenitic stainless steels
Austenitic stainless steel
austenite
Austenite
phase transformations
Nitrogen
Phase transitions
nitrogen
Lamellar structures
microstructure
Microstructure
Martensitic transformations
martensitic transformation
ambient temperature
heat treatment
Heat treatment
Cooling
cooling
heat
Temperature

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Cite this

Transition of phase transformation mechanism by mn addition in high nitrogen austenitic stainless steel. / Koga, Norimitsu; Fukuyama, Michinori; Nakada, Nobuo; Tsuchiyama, Toshihiro; Takaki, Setsuo.

In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 100, No. 9, 01.01.2014, p. 1165-1171.

Research output: Contribution to journalArticle

@article{7e3dde7000944bb08d7e0c58b654a171,
title = "Transition of phase transformation mechanism by mn addition in high nitrogen austenitic stainless steel",
abstract = "Fe-25Cr-1N-0, 2, 5Mn mass{\%} alloys were subjected to isothermal heat treatment, and their microstructure formation and phase transformation behavior were investigated in order to clarify the effect of Mn addition on the transformation mechanism of high nitrogen austenite. Microstructure observation for the 1073 K heat-treated specimens revealed that the Fe-25Cr-1N alloy exhibited (α+Cr2N) lamellar eutectoid structure, while the Fe-25Cr-1N-2Mn and -5Mn alloys did finer (α′(or retained γ)+Cr2N) lamellar structure as well as (α+Cr2N) lamellar eutectoid structure. It was suggested that the (α′+Cr2N) lamellar structure had been formed through γ1→γ2+Cr2N cellular precipitation followed by martensitic transformation of γ2on cooling to ambient temperature. Nitrogen concentration in untransformed austenite in the Fe-25Cr-1N-2Mn and -5Mn alloys was continuously decreased with progressing of (γ+Cr2N) cellular precipitation due to nitrogen long-range diffusion from untransformed austenite to (γ+Cr2N) cellular structure. As a result of decreased nitrogen concentration in untransformed austenite, transformation mechanism switched from (γ+Cr2N) cellular precipitation to (α+Cr2N) eutectoid transformation.",
author = "Norimitsu Koga and Michinori Fukuyama and Nobuo Nakada and Toshihiro Tsuchiyama and Setsuo Takaki",
year = "2014",
month = "1",
day = "1",
doi = "10.2355/tetsutohagane.100.1165",
language = "English",
volume = "100",
pages = "1165--1171",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "9",

}

TY - JOUR

T1 - Transition of phase transformation mechanism by mn addition in high nitrogen austenitic stainless steel

AU - Koga, Norimitsu

AU - Fukuyama, Michinori

AU - Nakada, Nobuo

AU - Tsuchiyama, Toshihiro

AU - Takaki, Setsuo

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Fe-25Cr-1N-0, 2, 5Mn mass% alloys were subjected to isothermal heat treatment, and their microstructure formation and phase transformation behavior were investigated in order to clarify the effect of Mn addition on the transformation mechanism of high nitrogen austenite. Microstructure observation for the 1073 K heat-treated specimens revealed that the Fe-25Cr-1N alloy exhibited (α+Cr2N) lamellar eutectoid structure, while the Fe-25Cr-1N-2Mn and -5Mn alloys did finer (α′(or retained γ)+Cr2N) lamellar structure as well as (α+Cr2N) lamellar eutectoid structure. It was suggested that the (α′+Cr2N) lamellar structure had been formed through γ1→γ2+Cr2N cellular precipitation followed by martensitic transformation of γ2on cooling to ambient temperature. Nitrogen concentration in untransformed austenite in the Fe-25Cr-1N-2Mn and -5Mn alloys was continuously decreased with progressing of (γ+Cr2N) cellular precipitation due to nitrogen long-range diffusion from untransformed austenite to (γ+Cr2N) cellular structure. As a result of decreased nitrogen concentration in untransformed austenite, transformation mechanism switched from (γ+Cr2N) cellular precipitation to (α+Cr2N) eutectoid transformation.

AB - Fe-25Cr-1N-0, 2, 5Mn mass% alloys were subjected to isothermal heat treatment, and their microstructure formation and phase transformation behavior were investigated in order to clarify the effect of Mn addition on the transformation mechanism of high nitrogen austenite. Microstructure observation for the 1073 K heat-treated specimens revealed that the Fe-25Cr-1N alloy exhibited (α+Cr2N) lamellar eutectoid structure, while the Fe-25Cr-1N-2Mn and -5Mn alloys did finer (α′(or retained γ)+Cr2N) lamellar structure as well as (α+Cr2N) lamellar eutectoid structure. It was suggested that the (α′+Cr2N) lamellar structure had been formed through γ1→γ2+Cr2N cellular precipitation followed by martensitic transformation of γ2on cooling to ambient temperature. Nitrogen concentration in untransformed austenite in the Fe-25Cr-1N-2Mn and -5Mn alloys was continuously decreased with progressing of (γ+Cr2N) cellular precipitation due to nitrogen long-range diffusion from untransformed austenite to (γ+Cr2N) cellular structure. As a result of decreased nitrogen concentration in untransformed austenite, transformation mechanism switched from (γ+Cr2N) cellular precipitation to (α+Cr2N) eutectoid transformation.

UR - http://www.scopus.com/inward/record.url?scp=84906963099&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84906963099&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.100.1165

DO - 10.2355/tetsutohagane.100.1165

M3 - Article

AN - SCOPUS:84906963099

VL - 100

SP - 1165

EP - 1171

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 9

ER -