Tribological behaviour of artificial cartilage in thin film lubrication

T. Murakami, Yoshinori Sawae, K. Nakashima, J. Fisher

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

In most of existing total replacement joints composed of ultra-high molecular polyethylene (UHMWPE) and metallic or bioceramic components, the mixed or boundary lubrication prevails in daily activities. The thin film condition with local direct contacts brings about considerable wear. Excessive production of wear particles can induce the osteolysis and then the loosening of the prosthesis components As a tribological design solution to reduce wear, the applications of compliant artificial cartilage materials have been proposed, in which the soft-elastohydrodynamic lubrication is expected to be effective. In this paper, the simulator tests for walking motion and the simplified reciprocating tests were conducted for sliding of artificial cartilage such as PVA (polyvinyl alcohol) hydrogel and two kinds of SIPN (semi-interpenetrating network) hydrogels against metal or ceramic specimen, to examine friction and wear of artificial cartilage materials in thin film mixed or boundary lubrication. In simulator tests under walking condition, the combination of cylindrical femoral component and flat tibial one with PVA hydrogel layer showed higher wear than concave tibial one. In simulator tests of various artificial cartilage flat specimens lubricated with hyaluronate solution, PVA hydrogel of high water content showed the lowest friction at the start of the test, but friction gradually increased with running. In contrast, the PVA hydrogel with low water content exhibited the highest friction throughout testing. SIPN hydrogel containing polyurethane showed lower friction than SIPN containing cellulose acetate. In reciprocating tests of the spherical zirconia stationary specimen and the flat reciprocating artificial cartilage at constant load, the interruptive test with 2 s interruption at stroke ends showed larger wear than the continuous reciprocating tests for the same sliding distance. The difference in wear of hydrogel materials was examined by the AFM (Atomic Force Microscopy) observation at non-contact fluid tapping mode.

Original languageEnglish
Pages (from-to)317-327
Number of pages11
JournalTribology Series
Volume38
Publication statusPublished - Jan 1 2000

Fingerprint

Cartilage
Hydrogels
Lubrication
Wear of materials
Polyvinyl alcohols
Thin films
Interpenetrating polymer networks
Friction
Simulators
Water content
Bioceramics
Elastohydrodynamic lubrication
Ultrahigh molecular weight polyethylenes
Zirconia
Polyurethanes
Polyethylenes
Cellulose
Atomic force microscopy
Fluids
Testing

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Murakami, T., Sawae, Y., Nakashima, K., & Fisher, J. (2000). Tribological behaviour of artificial cartilage in thin film lubrication. Tribology Series, 38, 317-327.

Tribological behaviour of artificial cartilage in thin film lubrication. / Murakami, T.; Sawae, Yoshinori; Nakashima, K.; Fisher, J.

In: Tribology Series, Vol. 38, 01.01.2000, p. 317-327.

Research output: Contribution to journalArticle

Murakami, T, Sawae, Y, Nakashima, K & Fisher, J 2000, 'Tribological behaviour of artificial cartilage in thin film lubrication', Tribology Series, vol. 38, pp. 317-327.
Murakami, T. ; Sawae, Yoshinori ; Nakashima, K. ; Fisher, J. / Tribological behaviour of artificial cartilage in thin film lubrication. In: Tribology Series. 2000 ; Vol. 38. pp. 317-327.
@article{6b2bb763d448482ba5a032abd2460421,
title = "Tribological behaviour of artificial cartilage in thin film lubrication",
abstract = "In most of existing total replacement joints composed of ultra-high molecular polyethylene (UHMWPE) and metallic or bioceramic components, the mixed or boundary lubrication prevails in daily activities. The thin film condition with local direct contacts brings about considerable wear. Excessive production of wear particles can induce the osteolysis and then the loosening of the prosthesis components As a tribological design solution to reduce wear, the applications of compliant artificial cartilage materials have been proposed, in which the soft-elastohydrodynamic lubrication is expected to be effective. In this paper, the simulator tests for walking motion and the simplified reciprocating tests were conducted for sliding of artificial cartilage such as PVA (polyvinyl alcohol) hydrogel and two kinds of SIPN (semi-interpenetrating network) hydrogels against metal or ceramic specimen, to examine friction and wear of artificial cartilage materials in thin film mixed or boundary lubrication. In simulator tests under walking condition, the combination of cylindrical femoral component and flat tibial one with PVA hydrogel layer showed higher wear than concave tibial one. In simulator tests of various artificial cartilage flat specimens lubricated with hyaluronate solution, PVA hydrogel of high water content showed the lowest friction at the start of the test, but friction gradually increased with running. In contrast, the PVA hydrogel with low water content exhibited the highest friction throughout testing. SIPN hydrogel containing polyurethane showed lower friction than SIPN containing cellulose acetate. In reciprocating tests of the spherical zirconia stationary specimen and the flat reciprocating artificial cartilage at constant load, the interruptive test with 2 s interruption at stroke ends showed larger wear than the continuous reciprocating tests for the same sliding distance. The difference in wear of hydrogel materials was examined by the AFM (Atomic Force Microscopy) observation at non-contact fluid tapping mode.",
author = "T. Murakami and Yoshinori Sawae and K. Nakashima and J. Fisher",
year = "2000",
month = "1",
day = "1",
language = "English",
volume = "38",
pages = "317--327",
journal = "Tribology Series",
issn = "0167-8922",
publisher = "Elsevier",

}

TY - JOUR

T1 - Tribological behaviour of artificial cartilage in thin film lubrication

AU - Murakami, T.

AU - Sawae, Yoshinori

AU - Nakashima, K.

AU - Fisher, J.

PY - 2000/1/1

Y1 - 2000/1/1

N2 - In most of existing total replacement joints composed of ultra-high molecular polyethylene (UHMWPE) and metallic or bioceramic components, the mixed or boundary lubrication prevails in daily activities. The thin film condition with local direct contacts brings about considerable wear. Excessive production of wear particles can induce the osteolysis and then the loosening of the prosthesis components As a tribological design solution to reduce wear, the applications of compliant artificial cartilage materials have been proposed, in which the soft-elastohydrodynamic lubrication is expected to be effective. In this paper, the simulator tests for walking motion and the simplified reciprocating tests were conducted for sliding of artificial cartilage such as PVA (polyvinyl alcohol) hydrogel and two kinds of SIPN (semi-interpenetrating network) hydrogels against metal or ceramic specimen, to examine friction and wear of artificial cartilage materials in thin film mixed or boundary lubrication. In simulator tests under walking condition, the combination of cylindrical femoral component and flat tibial one with PVA hydrogel layer showed higher wear than concave tibial one. In simulator tests of various artificial cartilage flat specimens lubricated with hyaluronate solution, PVA hydrogel of high water content showed the lowest friction at the start of the test, but friction gradually increased with running. In contrast, the PVA hydrogel with low water content exhibited the highest friction throughout testing. SIPN hydrogel containing polyurethane showed lower friction than SIPN containing cellulose acetate. In reciprocating tests of the spherical zirconia stationary specimen and the flat reciprocating artificial cartilage at constant load, the interruptive test with 2 s interruption at stroke ends showed larger wear than the continuous reciprocating tests for the same sliding distance. The difference in wear of hydrogel materials was examined by the AFM (Atomic Force Microscopy) observation at non-contact fluid tapping mode.

AB - In most of existing total replacement joints composed of ultra-high molecular polyethylene (UHMWPE) and metallic or bioceramic components, the mixed or boundary lubrication prevails in daily activities. The thin film condition with local direct contacts brings about considerable wear. Excessive production of wear particles can induce the osteolysis and then the loosening of the prosthesis components As a tribological design solution to reduce wear, the applications of compliant artificial cartilage materials have been proposed, in which the soft-elastohydrodynamic lubrication is expected to be effective. In this paper, the simulator tests for walking motion and the simplified reciprocating tests were conducted for sliding of artificial cartilage such as PVA (polyvinyl alcohol) hydrogel and two kinds of SIPN (semi-interpenetrating network) hydrogels against metal or ceramic specimen, to examine friction and wear of artificial cartilage materials in thin film mixed or boundary lubrication. In simulator tests under walking condition, the combination of cylindrical femoral component and flat tibial one with PVA hydrogel layer showed higher wear than concave tibial one. In simulator tests of various artificial cartilage flat specimens lubricated with hyaluronate solution, PVA hydrogel of high water content showed the lowest friction at the start of the test, but friction gradually increased with running. In contrast, the PVA hydrogel with low water content exhibited the highest friction throughout testing. SIPN hydrogel containing polyurethane showed lower friction than SIPN containing cellulose acetate. In reciprocating tests of the spherical zirconia stationary specimen and the flat reciprocating artificial cartilage at constant load, the interruptive test with 2 s interruption at stroke ends showed larger wear than the continuous reciprocating tests for the same sliding distance. The difference in wear of hydrogel materials was examined by the AFM (Atomic Force Microscopy) observation at non-contact fluid tapping mode.

UR - http://www.scopus.com/inward/record.url?scp=0034590342&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034590342&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0034590342

VL - 38

SP - 317

EP - 327

JO - Tribology Series

JF - Tribology Series

SN - 0167-8922

ER -