Use of two-layer cause-effect model to select source of signal in plant alarm system

Kazuhiro Takeda, Takashi Hamaguchi, Masaru Noda, Naoki Kimura, Toshiaki Itoh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Abstract

Alarm systems provide an interface between operators and the machinery in a chemical plant because they allow abnormalities or faults caused by operators to be detected at an early stage. Alarms should be used to enable operators to diagnose faults and plan countermeasures, and nuisance alarms should be eliminated. We propose the use of a selection algorithm of sets of pairs of alarm variables and their signs. The signs mean the upper or lower limits of the alarm variables. The selected sets of pairs are theoretically guaranteed to be able to qualitatively distinguish all assumed faults. We propose using a two-layer cause-effect model for the algorithm, which represents the cause and effect relationship between state variables based on the topology of a plant. This model is applied to a simple process. The simulation results illustrate the usefulness of our method.

Original languageEnglish
Title of host publicationKnowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings
Pages381-388
Number of pages8
EditionPART 2
DOIs
Publication statusPublished - Nov 23 2010
Event14th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2010 - Cardiff, United Kingdom
Duration: Sep 8 2010Sep 10 2010

Publication series

NameLecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
NumberPART 2
Volume6277 LNAI
ISSN (Print)0302-9743
ISSN (Electronic)1611-3349

Other

Other14th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2010
CountryUnited Kingdom
CityCardiff
Period9/8/109/10/10

Fingerprint

Alarm systems
Chemical plants
Fault
Operator
Failure analysis
Machinery
Topology
Countermeasures
Fault Diagnosis
Model
Simulation

All Science Journal Classification (ASJC) codes

  • Theoretical Computer Science
  • Computer Science(all)

Cite this

Takeda, K., Hamaguchi, T., Noda, M., Kimura, N., & Itoh, T. (2010). Use of two-layer cause-effect model to select source of signal in plant alarm system. In Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings (PART 2 ed., pp. 381-388). (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 6277 LNAI, No. PART 2). https://doi.org/10.1007/978-3-642-15390-7_39

Use of two-layer cause-effect model to select source of signal in plant alarm system. / Takeda, Kazuhiro; Hamaguchi, Takashi; Noda, Masaru; Kimura, Naoki; Itoh, Toshiaki.

Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings. PART 2. ed. 2010. p. 381-388 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 6277 LNAI, No. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Takeda, K, Hamaguchi, T, Noda, M, Kimura, N & Itoh, T 2010, Use of two-layer cause-effect model to select source of signal in plant alarm system. in Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings. PART 2 edn, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), no. PART 2, vol. 6277 LNAI, pp. 381-388, 14th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2010, Cardiff, United Kingdom, 9/8/10. https://doi.org/10.1007/978-3-642-15390-7_39
Takeda K, Hamaguchi T, Noda M, Kimura N, Itoh T. Use of two-layer cause-effect model to select source of signal in plant alarm system. In Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings. PART 2 ed. 2010. p. 381-388. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); PART 2). https://doi.org/10.1007/978-3-642-15390-7_39
Takeda, Kazuhiro ; Hamaguchi, Takashi ; Noda, Masaru ; Kimura, Naoki ; Itoh, Toshiaki. / Use of two-layer cause-effect model to select source of signal in plant alarm system. Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings. PART 2. ed. 2010. pp. 381-388 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); PART 2).
@inproceedings{2395274eb39c4e2cad19b8a0549318ba,
title = "Use of two-layer cause-effect model to select source of signal in plant alarm system",
abstract = "Alarm systems provide an interface between operators and the machinery in a chemical plant because they allow abnormalities or faults caused by operators to be detected at an early stage. Alarms should be used to enable operators to diagnose faults and plan countermeasures, and nuisance alarms should be eliminated. We propose the use of a selection algorithm of sets of pairs of alarm variables and their signs. The signs mean the upper or lower limits of the alarm variables. The selected sets of pairs are theoretically guaranteed to be able to qualitatively distinguish all assumed faults. We propose using a two-layer cause-effect model for the algorithm, which represents the cause and effect relationship between state variables based on the topology of a plant. This model is applied to a simple process. The simulation results illustrate the usefulness of our method.",
author = "Kazuhiro Takeda and Takashi Hamaguchi and Masaru Noda and Naoki Kimura and Toshiaki Itoh",
year = "2010",
month = "11",
day = "23",
doi = "10.1007/978-3-642-15390-7_39",
language = "English",
isbn = "3642153895",
series = "Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)",
number = "PART 2",
pages = "381--388",
booktitle = "Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings",
edition = "PART 2",

}

TY - GEN

T1 - Use of two-layer cause-effect model to select source of signal in plant alarm system

AU - Takeda, Kazuhiro

AU - Hamaguchi, Takashi

AU - Noda, Masaru

AU - Kimura, Naoki

AU - Itoh, Toshiaki

PY - 2010/11/23

Y1 - 2010/11/23

N2 - Alarm systems provide an interface between operators and the machinery in a chemical plant because they allow abnormalities or faults caused by operators to be detected at an early stage. Alarms should be used to enable operators to diagnose faults and plan countermeasures, and nuisance alarms should be eliminated. We propose the use of a selection algorithm of sets of pairs of alarm variables and their signs. The signs mean the upper or lower limits of the alarm variables. The selected sets of pairs are theoretically guaranteed to be able to qualitatively distinguish all assumed faults. We propose using a two-layer cause-effect model for the algorithm, which represents the cause and effect relationship between state variables based on the topology of a plant. This model is applied to a simple process. The simulation results illustrate the usefulness of our method.

AB - Alarm systems provide an interface between operators and the machinery in a chemical plant because they allow abnormalities or faults caused by operators to be detected at an early stage. Alarms should be used to enable operators to diagnose faults and plan countermeasures, and nuisance alarms should be eliminated. We propose the use of a selection algorithm of sets of pairs of alarm variables and their signs. The signs mean the upper or lower limits of the alarm variables. The selected sets of pairs are theoretically guaranteed to be able to qualitatively distinguish all assumed faults. We propose using a two-layer cause-effect model for the algorithm, which represents the cause and effect relationship between state variables based on the topology of a plant. This model is applied to a simple process. The simulation results illustrate the usefulness of our method.

UR - http://www.scopus.com/inward/record.url?scp=78449245270&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78449245270&partnerID=8YFLogxK

U2 - 10.1007/978-3-642-15390-7_39

DO - 10.1007/978-3-642-15390-7_39

M3 - Conference contribution

SN - 3642153895

SN - 9783642153891

T3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

SP - 381

EP - 388

BT - Knowledge-Based and Intelligent Information and Engineering Systems - 14th International Conference, KES 2010, Proceedings

ER -