Vapor absorption phenomenon into sessile liquid desiccant droplets

Zhenying Wang, Daniel Orejon, K. Sefiane, Yasuyuki Takata

Research output: Contribution to journalConference article

Abstract

This paper reveals the vapor absorption phenomena of liquid desiccant solution droplets on solid surfaces based on heat and mass transfer analyses. Vapor absorption is function of the pressure difference between the ambient air and the partial pressure of the vapor in the vicinity of the droplet liquid-gas interface. Due to the presence of salt ions (Li+, Br-) in the droplet, the vapor pressure at the droplet surface is significantly reduced, and hence vapor absorbs accordingly. Depending on the different ambient conditions, the droplet behavior differs. On hydrophilic glass substrate, the droplets spread slowly with monotonously decreasing contact angle and increasing contact radius. While on hydrophobic PTFE substrate, the droplets spread much less, and an “advancing stick-slip” phenomenon is observed at high ambient humidity. Different from water droplet, the solute concentration of the LiBr-H2O droplet will change along with time due to water absorption, which then causes a decrease in the vapor pressure difference. Therefore, the vapor absorption process will slow down due to the decreasing driving force, which corresponds with the observed droplet performance. Moreover, the volume expansion ratio, i.e., final volume to initial volume ratio, of the liquid desiccant droplets only depends on the ambient relative humidity, which is supported by the equilibrium relationship between the ambient air and the desiccant solution. Finally, droplets on hydrophilic glass substrates can reach equilibrium with the ambience faster than those on hydrophobic PTFE substrates, which is explained by the apparently shorter characteristic length for solute diffusion within droplets on hydrophilic substrates.

Original languageEnglish
Pages (from-to)843-850
Number of pages8
JournalInternational Heat Transfer Conference
Volume2018-August
Publication statusPublished - Jan 1 2018
Event16th International Heat Transfer Conference, IHTC 2018 - Beijing, China
Duration: Aug 10 2018Aug 15 2018

Fingerprint

Hygroscopic Agents
desiccants
Vapors
vapors
Liquids
liquids
vapor pressure
humidity
solutes
ambience
glass
air
Substrates
solid surfaces
water
mass transfer
partial pressure
Polytetrafluoroethylene
slip
Vapor pressure

All Science Journal Classification (ASJC) codes

  • Fluid Flow and Transfer Processes
  • Condensed Matter Physics
  • Mechanical Engineering

Cite this

Vapor absorption phenomenon into sessile liquid desiccant droplets. / Wang, Zhenying; Orejon, Daniel; Sefiane, K.; Takata, Yasuyuki.

In: International Heat Transfer Conference, Vol. 2018-August, 01.01.2018, p. 843-850.

Research output: Contribution to journalConference article

Wang, Zhenying ; Orejon, Daniel ; Sefiane, K. ; Takata, Yasuyuki. / Vapor absorption phenomenon into sessile liquid desiccant droplets. In: International Heat Transfer Conference. 2018 ; Vol. 2018-August. pp. 843-850.
@article{4c762cb5a38e4a53935860c09bfb4cb4,
title = "Vapor absorption phenomenon into sessile liquid desiccant droplets",
abstract = "This paper reveals the vapor absorption phenomena of liquid desiccant solution droplets on solid surfaces based on heat and mass transfer analyses. Vapor absorption is function of the pressure difference between the ambient air and the partial pressure of the vapor in the vicinity of the droplet liquid-gas interface. Due to the presence of salt ions (Li+, Br-) in the droplet, the vapor pressure at the droplet surface is significantly reduced, and hence vapor absorbs accordingly. Depending on the different ambient conditions, the droplet behavior differs. On hydrophilic glass substrate, the droplets spread slowly with monotonously decreasing contact angle and increasing contact radius. While on hydrophobic PTFE substrate, the droplets spread much less, and an “advancing stick-slip” phenomenon is observed at high ambient humidity. Different from water droplet, the solute concentration of the LiBr-H2O droplet will change along with time due to water absorption, which then causes a decrease in the vapor pressure difference. Therefore, the vapor absorption process will slow down due to the decreasing driving force, which corresponds with the observed droplet performance. Moreover, the volume expansion ratio, i.e., final volume to initial volume ratio, of the liquid desiccant droplets only depends on the ambient relative humidity, which is supported by the equilibrium relationship between the ambient air and the desiccant solution. Finally, droplets on hydrophilic glass substrates can reach equilibrium with the ambience faster than those on hydrophobic PTFE substrates, which is explained by the apparently shorter characteristic length for solute diffusion within droplets on hydrophilic substrates.",
author = "Zhenying Wang and Daniel Orejon and K. Sefiane and Yasuyuki Takata",
year = "2018",
month = "1",
day = "1",
language = "English",
volume = "2018-August",
pages = "843--850",
journal = "International Heat Transfer Conference",
issn = "2377-424X",

}

TY - JOUR

T1 - Vapor absorption phenomenon into sessile liquid desiccant droplets

AU - Wang, Zhenying

AU - Orejon, Daniel

AU - Sefiane, K.

AU - Takata, Yasuyuki

PY - 2018/1/1

Y1 - 2018/1/1

N2 - This paper reveals the vapor absorption phenomena of liquid desiccant solution droplets on solid surfaces based on heat and mass transfer analyses. Vapor absorption is function of the pressure difference between the ambient air and the partial pressure of the vapor in the vicinity of the droplet liquid-gas interface. Due to the presence of salt ions (Li+, Br-) in the droplet, the vapor pressure at the droplet surface is significantly reduced, and hence vapor absorbs accordingly. Depending on the different ambient conditions, the droplet behavior differs. On hydrophilic glass substrate, the droplets spread slowly with monotonously decreasing contact angle and increasing contact radius. While on hydrophobic PTFE substrate, the droplets spread much less, and an “advancing stick-slip” phenomenon is observed at high ambient humidity. Different from water droplet, the solute concentration of the LiBr-H2O droplet will change along with time due to water absorption, which then causes a decrease in the vapor pressure difference. Therefore, the vapor absorption process will slow down due to the decreasing driving force, which corresponds with the observed droplet performance. Moreover, the volume expansion ratio, i.e., final volume to initial volume ratio, of the liquid desiccant droplets only depends on the ambient relative humidity, which is supported by the equilibrium relationship between the ambient air and the desiccant solution. Finally, droplets on hydrophilic glass substrates can reach equilibrium with the ambience faster than those on hydrophobic PTFE substrates, which is explained by the apparently shorter characteristic length for solute diffusion within droplets on hydrophilic substrates.

AB - This paper reveals the vapor absorption phenomena of liquid desiccant solution droplets on solid surfaces based on heat and mass transfer analyses. Vapor absorption is function of the pressure difference between the ambient air and the partial pressure of the vapor in the vicinity of the droplet liquid-gas interface. Due to the presence of salt ions (Li+, Br-) in the droplet, the vapor pressure at the droplet surface is significantly reduced, and hence vapor absorbs accordingly. Depending on the different ambient conditions, the droplet behavior differs. On hydrophilic glass substrate, the droplets spread slowly with monotonously decreasing contact angle and increasing contact radius. While on hydrophobic PTFE substrate, the droplets spread much less, and an “advancing stick-slip” phenomenon is observed at high ambient humidity. Different from water droplet, the solute concentration of the LiBr-H2O droplet will change along with time due to water absorption, which then causes a decrease in the vapor pressure difference. Therefore, the vapor absorption process will slow down due to the decreasing driving force, which corresponds with the observed droplet performance. Moreover, the volume expansion ratio, i.e., final volume to initial volume ratio, of the liquid desiccant droplets only depends on the ambient relative humidity, which is supported by the equilibrium relationship between the ambient air and the desiccant solution. Finally, droplets on hydrophilic glass substrates can reach equilibrium with the ambience faster than those on hydrophobic PTFE substrates, which is explained by the apparently shorter characteristic length for solute diffusion within droplets on hydrophilic substrates.

UR - http://www.scopus.com/inward/record.url?scp=85068346406&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85068346406&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:85068346406

VL - 2018-August

SP - 843

EP - 850

JO - International Heat Transfer Conference

JF - International Heat Transfer Conference

SN - 2377-424X

ER -