Visualization of multiple stall cells propagating in an axial compressor rotor

M. Inoue, M. Kuroumaru, T. Tanino, M. Furukawa

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

This paper describes visualization of multiple stall cells propagating in an axial compressor rotor. The multiple stall cells have appeared at equal intervals under a mild stall condition of the compressor test rig in Kyushu University. Then, time-dependent ensemble averages of the three-dimensional velocity components upstream and downstream of the rotor, and the pressure distributions on the casing wall have been obtained by a so-called 'double phase-locked averaging technique' in which the outputs of a hot-wire and high response pressure transducers are averaged phase-locked to both of the rotor and the cell rotation. On the basis of the 25 time dependent averaged flow fields, the animations have been made to visualize the flow behavior of the stall cell propagation. The structure of the stall cell is characterized by the length-scale of a few blade spacing and a part-span type. It consists of the separation vortex bubble with a leg travelling ahead of the rotor, changing the blade in turn on which the vortex leg stands. The reverse flows appeared upstream and downstream of the rotor are resulted from this vortical flow.

Original languageEnglish
Title of host publicationProceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM)
PublisherAmerican Society of Mechanical Engineers
Number of pages1
ISBN (Print)0791819612
Publication statusPublished - Dec 1 1999

All Science Journal Classification (ASJC) codes

  • Earth and Planetary Sciences(all)
  • Engineering(all)
  • Environmental Science(all)

Fingerprint Dive into the research topics of 'Visualization of multiple stall cells propagating in an axial compressor rotor'. Together they form a unique fingerprint.

Cite this