Weakest region analysis of non-combustible Mg products fabricated by selective laser melting

Bryan Proaño, Hirofumi Miyahara, Toshiharu Matsumoto, Shigeru Hamada, Hitoshi Sakai, Kiyoshi Ogawa, Suyalatu, Hiroshi Noguchi

Research output: Contribution to journalArticle

Abstract

In this study, several Mg-9%Al-2%Ca alloy specimens were made using selective laser melting process (SLM) and subsequently subjected to tensile testing. Results showed that the microstructure of this specimen consist of fine grain, which serves to harden the material, and coarse grain, which is defined by the relatively slowly cooled region, softening the material and increasing its plasticity. The coarse grain tended to preferentially solidify immediately below the outer surface of the sample, which could lead to a stable crack propagation that originated from a defect located at the surface as a consequence of the intrinsic irregularity of SLM processes, the effects of which must be considered in order to determine the fracture toughness. Based on this information, corresponding measures can be provided in order to improve the process stability for non-combustible magnesium products.

Original languageEnglish
Article number102291
JournalTheoretical and Applied Fracture Mechanics
Volume103
DOIs
Publication statusPublished - Oct 2019

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Applied Mathematics

Cite this