Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion

Kaveh Edalati, Maki Ashida, Zenji Horita, Toshiaki Matsui, Hirotaka Kato

Research output: Contribution to journalArticle

39 Citations (Scopus)

Abstract

Ultrafine-grained pure Al and Al-based composites with 10 and 20vol% of Al2O3 were produced by cold consolidation of powders using high-pressure torsion (HPT). Ball-on-disc wear resistance of Al was improved by HPT when compared to its coarse-grained counterpart processed with H24 treatment (cold rolling followed by low-temperature annealing). Wear width decreased but wear depth and wear volume increased with the addition of Al2O3 to the Al matrix. The wear mechanism was mainly due to adhesion in Al and Al-Al2O3 composites. It was found that the variation of wear width can be represented by a unique function of the ratio of load/hardness in consistency with the Reye's hypothesis and the Holm and Archard relationships. However, the variation of wear depth was inconsistent with the hardness variations.

Original languageEnglish
Pages (from-to)83-89
Number of pages7
JournalWear
Volume310
Issue number1-2
DOIs
Publication statusPublished - Feb 15 2014

Fingerprint

Aluminum
wear resistance
Torsional stress
Wear resistance
torsion
Wear of materials
aluminum
composite materials
Composite materials
hardness
Hardness
cold rolling
consolidation
Cold rolling
Consolidation
Powders
balls
Loads (forces)
adhesion
Adhesion

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this

Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion. / Edalati, Kaveh; Ashida, Maki; Horita, Zenji; Matsui, Toshiaki; Kato, Hirotaka.

In: Wear, Vol. 310, No. 1-2, 15.02.2014, p. 83-89.

Research output: Contribution to journalArticle

Edalati, Kaveh ; Ashida, Maki ; Horita, Zenji ; Matsui, Toshiaki ; Kato, Hirotaka. / Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion. In: Wear. 2014 ; Vol. 310, No. 1-2. pp. 83-89.
@article{77b4c7b0717b49da8d9638e44f3a93aa,
title = "Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion",
abstract = "Ultrafine-grained pure Al and Al-based composites with 10 and 20vol{\%} of Al2O3 were produced by cold consolidation of powders using high-pressure torsion (HPT). Ball-on-disc wear resistance of Al was improved by HPT when compared to its coarse-grained counterpart processed with H24 treatment (cold rolling followed by low-temperature annealing). Wear width decreased but wear depth and wear volume increased with the addition of Al2O3 to the Al matrix. The wear mechanism was mainly due to adhesion in Al and Al-Al2O3 composites. It was found that the variation of wear width can be represented by a unique function of the ratio of load/hardness in consistency with the Reye's hypothesis and the Holm and Archard relationships. However, the variation of wear depth was inconsistent with the hardness variations.",
author = "Kaveh Edalati and Maki Ashida and Zenji Horita and Toshiaki Matsui and Hirotaka Kato",
year = "2014",
month = "2",
day = "15",
doi = "10.1016/j.wear.2013.12.022",
language = "English",
volume = "310",
pages = "83--89",
journal = "Wear",
issn = "0043-1648",
publisher = "Elsevier BV",
number = "1-2",

}

TY - JOUR

T1 - Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion

AU - Edalati, Kaveh

AU - Ashida, Maki

AU - Horita, Zenji

AU - Matsui, Toshiaki

AU - Kato, Hirotaka

PY - 2014/2/15

Y1 - 2014/2/15

N2 - Ultrafine-grained pure Al and Al-based composites with 10 and 20vol% of Al2O3 were produced by cold consolidation of powders using high-pressure torsion (HPT). Ball-on-disc wear resistance of Al was improved by HPT when compared to its coarse-grained counterpart processed with H24 treatment (cold rolling followed by low-temperature annealing). Wear width decreased but wear depth and wear volume increased with the addition of Al2O3 to the Al matrix. The wear mechanism was mainly due to adhesion in Al and Al-Al2O3 composites. It was found that the variation of wear width can be represented by a unique function of the ratio of load/hardness in consistency with the Reye's hypothesis and the Holm and Archard relationships. However, the variation of wear depth was inconsistent with the hardness variations.

AB - Ultrafine-grained pure Al and Al-based composites with 10 and 20vol% of Al2O3 were produced by cold consolidation of powders using high-pressure torsion (HPT). Ball-on-disc wear resistance of Al was improved by HPT when compared to its coarse-grained counterpart processed with H24 treatment (cold rolling followed by low-temperature annealing). Wear width decreased but wear depth and wear volume increased with the addition of Al2O3 to the Al matrix. The wear mechanism was mainly due to adhesion in Al and Al-Al2O3 composites. It was found that the variation of wear width can be represented by a unique function of the ratio of load/hardness in consistency with the Reye's hypothesis and the Holm and Archard relationships. However, the variation of wear depth was inconsistent with the hardness variations.

UR - http://www.scopus.com/inward/record.url?scp=84892456010&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84892456010&partnerID=8YFLogxK

U2 - 10.1016/j.wear.2013.12.022

DO - 10.1016/j.wear.2013.12.022

M3 - Article

AN - SCOPUS:84892456010

VL - 310

SP - 83

EP - 89

JO - Wear

JF - Wear

SN - 0043-1648

IS - 1-2

ER -