Winding design study of superconducting 10 T dipoles for a synchrotron

Kenji Ishibashi, A. D. McInturff

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.

Original languageEnglish
Pages (from-to)1364-1367
Number of pages4
JournalIEEE Transactions on Magnetics
Volume19
Issue number3
DOIs
Publication statusPublished - Jan 1 1983

Fingerprint

Synchrotrons
Magnets
synchrotrons
magnets
dipoles
Particle accelerators
accelerators
apertures
configurations

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Winding design study of superconducting 10 T dipoles for a synchrotron. / Ishibashi, Kenji; McInturff, A. D.

In: IEEE Transactions on Magnetics, Vol. 19, No. 3, 01.01.1983, p. 1364-1367.

Research output: Contribution to journalArticle

Ishibashi, Kenji ; McInturff, A. D. / Winding design study of superconducting 10 T dipoles for a synchrotron. In: IEEE Transactions on Magnetics. 1983 ; Vol. 19, No. 3. pp. 1364-1367.
@article{6b257d7adfc5457092604e086e2c1dcc,
title = "Winding design study of superconducting 10 T dipoles for a synchrotron",
abstract = "A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.",
author = "Kenji Ishibashi and McInturff, {A. D.}",
year = "1983",
month = "1",
day = "1",
doi = "10.1109/TMAG.1983.1062497",
language = "English",
volume = "19",
pages = "1364--1367",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Winding design study of superconducting 10 T dipoles for a synchrotron

AU - Ishibashi, Kenji

AU - McInturff, A. D.

PY - 1983/1/1

Y1 - 1983/1/1

N2 - A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.

AB - A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.

UR - http://www.scopus.com/inward/record.url?scp=0020125003&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0020125003&partnerID=8YFLogxK

U2 - 10.1109/TMAG.1983.1062497

DO - 10.1109/TMAG.1983.1062497

M3 - Article

AN - SCOPUS:0020125003

VL - 19

SP - 1364

EP - 1367

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 3

ER -