機械工学部門

研究成果 1979 2020

2020
austenitic stainless steels
notches
Austenitic stainless steel
phase transformations
Phase transitions

Evaluation of Feel of Fishing Reel by Elucidating the Relationship Between Tactile Sensation and Gear Vibration

Inoue, T. & Kurokawa, S., 1 1 2020, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design. Fukuda, S. (版). Springer Verlag, p. 154-164 11 p. (Advances in Intelligent Systems and Computing; 巻数 952).

研究成果: 著書/レポートタイプへの貢献会議での発言

Gears
Reels
Gear teeth
Time delay

Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry

Chen, Z., Hu, X., Hu, K., Utaka, Y. & Mori, S., 1 2020, : : International Journal of Heat and Mass Transfer. 146, 118856.

研究成果: ジャーナルへの寄稿記事

Laser interferometry
nucleate boiling
laser interferometry
Nucleate boiling
Heat flux

Revealing the mechanism of critical root radius in notch fatigue limit based on crack closure concept

Li, B., Jiang, C., Noguchi, H. & Liu, L., 1 2020, : : International Journal of Fatigue. 130, 105261.

研究成果: ジャーナルへの寄稿記事

Fatigue Crack Propagation
Fatigue Limit
Crack Closure
Fatigue Crack Growth
Crack closure
2019
2 引用 (Scopus)

1-second-resolved strain mapping in Ti-6Al-4V alloys during dwell fatigue in SEM by video sampling moiré

Wang, Q., Ri, S., Maenosono, A., Tanaka, Y. & Koyama, M., 6 1 2019, : : Mechanics of Materials. 133, p. 63-70 8 p.

研究成果: ジャーナルへの寄稿記事

dwell
Electron microscopes
electron microscopes
sampling
Fatigue of materials

Abnormally enhanced diamagnetism in Al-Zn-Mg alloys

Nishimura, K., Matsuda, K., Lee, S., Nunomura, N., Shimano, T., Bendo, A., Watanabe, K., Tsuchiya, T., Namiki, T., Toda, H. & Yamaguchi, M., 2 5 2019, : : Journal of Alloys and Compounds. 774, p. 405-409 5 p.

研究成果: ジャーナルへの寄稿記事

Diamagnetism
Magnetization
Aging of materials
Heat treatment
Vacancies
2 引用 (Scopus)

A combination of the finite element analysis and experimental indentation via the cornea

Karimi, A., Razaghi, R., Sera, T. & Kudo, S., 2 1 2019, : : Journal of the Mechanical Behavior of Biomedical Materials. 90, p. 146-154 9 p.

研究成果: ジャーナルへの寄稿記事

Indentation
Finite element method
Elastic moduli
Stiffness

Adsorbed gas layers limit the mobility of micropancakes

Teshima, H., Takata, Y. & Takahashi, K., 8 12 2019, : : Applied Physics Letters. 115, 7, 071603.

研究成果: ジャーナルへの寄稿記事

gases
atomic force microscopy
vapor phases
pyrolytic graphite
solid surfaces

Al-10Mg 合金における応力腐食割れ挙動に及ぼす水素の影響

Hirayama, K., Toda, H., Shimizu, K., Uesugi, K., Takeuchi, A. & Masunaga, R., 1 1 2019, : : Keikinzoku/Journal of Japan Institute of Light Metals. 69, 4, p. 223-227 5 p.

研究成果: ジャーナルへの寄稿記事

公開
Stress corrosion cracking
Hydrogen
Corrosion
Cracks
Synchrotrons

Assessment of hydrogen embrittlement via image-based techniques in Al–Zn–Mg–Cu aluminum alloys

Su, H., Toda, H., Shimizu, K., Uesugi, K., Takeuchi, A. & Watanabe, Y., 9 1 2019, : : Acta Materialia. 176, p. 96-108 13 p.

研究成果: ジャーナルへの寄稿記事

Hydrogen embrittlement
Hydrogen
Aluminum alloys
Intermetallics
Precipitates

Assessment of predominant microstructural features controlling 3D short crack growth behavior via a surrogate approach in Ti-6Al-4V

Hassanipour, M., Watanabe, S., Hirayama, K., Li, H., Toda, H., Uesugi, K. & Takeuchi, A., 3 28 2019, : : Materials Science and Engineering A. 751, p. 351-362 12 p.

研究成果: ジャーナルへの寄稿記事

short cracks
Crack propagation
cracks
Cracks
shear stress

A study on performance prediction of Darrieus-type hydroturbine operated in open channels using CFD with actuator disk method

Suzuki, Y., Katayama, Y., Watanabe, S., Tsuda, S. & Furukawa, A., 3 28 2019, : : IOP Conference Series: Earth and Environmental Science. 240, 4, 042020.

研究成果: ジャーナルへの寄稿Conference article

公開
turbine
prediction
flow velocity
experiment
flow field

A Study on Real-Time Detection of Interacting Motion Intention for Perception-Assist with an Upper-Limb Wearable Power-Assist Robot

Kiguchi, K. & Chathuramali, M., 1 16 2019, Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 900-905 6 p. 8616156. (Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018).

研究成果: 著書/レポートタイプへの貢献会議での発言

Motion Perception
Upper Extremity
Robots
Aptitude
Classifiers

Attempts on pico-precision machining via combination of ELID-grinding and polishing

Ohmori, H., Kim, Y., Uehara, Y., Kasuga, H., Ono-Kato, T., Lin, W., Kurokawa, S. & Umezu, S., 1 1 2019, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 304-309 6 p.

研究成果: ジャーナルへの寄稿記事

Polishing
Machining

Biogas Power Generation with SOFC to Demonstrate Energy Circulation Suitable for Mekong Delta, Vietnam

Shiratori, Y., Sakamoto, M., Nguyen, T. G. H., Yamakawa, T., Kitaoka, T., Orishima, H., Matsubara, H., Watanabe, Y., Nakatsuka, S., Doan, T. C. D. & Dang, C. M., 1 1 2019, : : Fuel Cells. 19, 4, p. 346-353 8 p.

研究成果: ジャーナルへの寄稿記事

Biogas
Solid oxide fuel cells (SOFC)
Power generation
Bagasse
Ponds

Biomimetic artificial cartilage: Fibre-reinforcement of PVA hydrogel to promote biphasic lubrication mechanism

Sakai, N., Yarimitsu, S., Sawae, Y., Komori, M. & Murakami, T., 3 1 2019, : : Biosurface and Biotribology. 5, 1, p. 13-19 7 p.

研究成果: ジャーナルへの寄稿記事

公開
Lubrication
Biomimetics
Hydrogel
Cartilage
Fiber reinforced materials

Bio-mimic motion of 3D-printed gel structures dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., 1 1 2019, : : Journal of the Electrochemical Society. 166, 9, p. B3235-B3239

研究成果: ジャーナルへの寄稿記事

公開
Particles (particulate matter)
Gels
Actuators
Magnetic fields
Magnetic anisotropy
1 引用 (Scopus)

Bio-mimic motion of gel material dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., 1 1 2019, ECS Transactions. Nagahara, L., Masubuchi, Y., Shiba, T., Ito, K., Sekhar, P., Yanagida, M., Dos Santos, F. D., Milano, G., Furukawa, H., Chu, T-Y., Saito, T., Kakugo, A., Matsui, H., Tokito, S., Ito, H., Khosla, A., Fukushima, K., Yoshida, T., Bhansali, S., Kaltenbrunner, M., White, M., Nakai, A. & Masuhara, A. (版). 1 版 Electrochemical Society Inc., p. 89-97 9 p. (ECS Transactions; 巻数 88, 番号 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Particles (particulate matter)
Printing
Actuators
Gels
3D printers

Cavitation simulation of automotive torque converter using a homogeneous cavitation model

Tsutsumi, K., Watanabe, S., Tsuda, S. & Yamaguchi, T., 1 1 2019.

研究成果: 会議への寄与タイプ論文

Torque converters
Cavitation
Pumps
Turbine pumps
Partial pressure
1 引用 (Scopus)

Cavitation simulation using a new simple homogeneous cavitation model

Watanabe, S., Tsuru, W., Yamamoto, Y. & Tsuda, S., 1 1 2019.

研究成果: 会議への寄与タイプ論文

Cavitation
Hydrofoils
Shear stress
Liquids
Vapors
1 引用 (Scopus)

Characterisation of structural similarities of precipitates in Mg–Zn and Al–Zn–Mg alloys systems

Bendo, A., Maeda, T., Matsuda, K., Lervik, A., Holmestad, R., Marioara, C. D., Nishimura, K., Nunomura, N., Toda, H., Yamaguchi, M., Ikeda, K. I. & Homma, T., 11 2 2019, : : Philosophical Magazine. 99, 21, p. 2619-2635 17 p.

研究成果: ジャーナルへの寄稿記事

precipitates
hexagons
bricks
cells
aspect ratio

Choice of muscular forces for motion control of a robot arm with biarticular muscles

Morizono, T., Tahara, K. & Kino, H., 1 1 2019, : : Journal of Robotics and Mechatronics. 31, 1, p. 143-155 13 p.

研究成果: ジャーナルへの寄稿記事

Motion control
Muscle
Robots
Robotic arms
Kinetics

Classification for Two Recovery Action Strategies in Slipping Fall

Kobayashi, T., Nakashima, Y. & Yamamoto, M., 4 25 2019, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 233-236 4 p. 8700375. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

研究成果: 著書/レポートタイプへの貢献会議での発言

recovery
Recovery
falling
Accidents
Experiments

CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry

Wakamatsu, K., Kurokawa, S., Toyama, T. & Hayashi, T., 11 1 2019, : : Precision Engineering. 60, p. 458-464 7 p.

研究成果: ジャーナルへの寄稿記事

Cerium compounds
Quartz
Glass
Substrates
Polishing

Colorectal endoscopic submucosal dissection using novel articulating devices: a comparative study in a live porcine model

Okamoto, Y., Nakadate, R., Nakamura, S., Arata, J., Oguri, S., Tomohiko, M., Esaki, M., iwasa, T., Ouchida, K., Akahoshi, T., Ikeda, T., Kitazono, T. & Hashizume, M., 2 15 2019, : : Surgical endoscopy. 33, 2, p. 651-657 7 p.

研究成果: ジャーナルへの寄稿記事

Swine
Equipment and Supplies
Endoscopic Mucosal Resection
Anal Canal
Colon
1 引用 (Scopus)

Comparative study of hydrogen-induced intergranular fracture behavior in Ni and Cu–Ni alloy at ambient and cryogenic temperatures

Wada, K., Yamabe, J., Ogawa, Y., Takakuwa, O., Iijima, T. & Matsunaga, H., 10 24 2019, : : Materials Science and Engineering A. 766, 138349.

研究成果: ジャーナルへの寄稿記事

cryogenic temperature
Cryogenics
ambient temperature
Hydrogen
hydrogen embrittlement
公開
end effectors
Brain computer interface
Near infrared spectroscopy
End effectors
strokes
1 引用 (Scopus)

Compliant four degree-of-freedom manipulator with locally deformable elastic elements for minimally invasive surgery

Arata, J., Fujisawa, Y., Nakadate, R., Kiguchi, K., Harada, K., Mitsuishi, M. & Hashizume, M., 5 1 2019, 2019 International Conference on Robotics and Automation, ICRA 2019. Institute of Electrical and Electronics Engineers Inc., p. 2663-2669 7 p. 8793798. (Proceedings - IEEE International Conference on Robotics and Automation; 巻数 2019-May).

研究成果: 著書/レポートタイプへの貢献会議での発言

Surgery
Manipulators
Robotics
Needles
Finite element method
1 引用 (Scopus)

Coupled thermal transport and mass diffusion during vapor absorption into hygroscopic liquid desiccant droplets

Wang, Z., Orejon, D., Sefiane, K. & Takata, Y., 5 1 2019, : : International Journal of Heat and Mass Transfer. 134, p. 1014-1023 10 p.

研究成果: ジャーナルへの寄稿記事

Hygroscopic Agents
desiccants
Vapors
vapors
Liquids

Crystallographic selection rule for the propagation mode of microstructurally small fatigue crack in a laminated Ti-6Al-4V alloy: Roles of basal and pyramidal slips

Maenosono, A., Koyama, M., Tanaka, Y., Ri, S., Wang, Q. & Noguchi, H., 11 1 2019, : : International Journal of Fatigue. 128, 105200.

研究成果: ジャーナルへの寄稿記事

Fatigue Crack Growth
Fatigue Crack
Selection Rules
Fatigue crack propagation
Slip
2 引用 (Scopus)

Density Data of Two (H2 + CO2) Mixtures and a (H2 + CO2 + CH4) Mixture by a Modified Burnett Method at Temperature 673 K and Pressures up to 25 MPa

Cheng, S., Shang, F., Ma, W., Jin, H., Sakoda, N., Zhang, X. & Guo, L., 4 11 2019, : : Journal of Chemical and Engineering Data. 64, 4, p. 1693-1704 12 p.

研究成果: ジャーナルへの寄稿記事

Equations of state
Temperature
Water
Coal
Gasification

Density measurements of the H2-CO2-CH4-CO-H2O System by the Isochoric Method at 722-930 K and 15.4-30.3 MPa

Cheng, S., Shang, F., Ma, W., Jin, H., Sakoda, N., Zhang, X. & Guo, L., 9 12 2019, : : Journal of Chemical and Engineering Data. 64, 9, p. 4013-4023 11 p.

研究成果: ジャーナルへの寄稿記事

Volumetric analysis
Carbon Monoxide
Carbon Dioxide
Thermal expansion
Carbon dioxide

Design, modeling, and motion analysis of a novel fluid actuated spherical rolling robot

Tafrishi, S. A., Svinin, M., Esmaeilzadeh, E. & Yamamoto, M., 8 1 2019, : : Journal of Mechanisms and Robotics. 11, 4, 041010.

研究成果: ジャーナルへの寄稿記事

Robots
Fluids
Pipe
Torque motors
Mobile robots

Design and control of a power-assist system for pedal operation

Fujita, T., Kiguchi, K., Yabunaka, S., Takeda, Y. & Hara, T., 1 1 2019, : : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 651-654 4 p.

研究成果: ジャーナルへの寄稿記事

Railroad cars

Detection Improvement of Unburned Carbon Content in Fly Ash Flow Using LIBS with a Two-Stage Cyclone Measurement System

Wang, Z., Liu, R., Deguchi, Y., Tanaka, S., Tainaka, K., Tanno, K., Watanabe, H., Yan, J. & Liu, J., 8 15 2019, : : Energy and Fuels. 33, 8, p. 7805-7812 8 p.

研究成果: ジャーナルへの寄稿記事

Coal Ash
Laser induced breakdown spectroscopy
Fly ash
Carbon
Plasmas

Detection of hydrogen effusion before, during, and after martensitic transformation: Example of multiphase transformation-induced plasticity steel

Koyama, M., Yamasaki, D., Ikeda, A., Hojo, T., Akiyama, E., Takai, K. & Tsuzaki, K., 10 4 2019, : : International Journal of Hydrogen Energy. 44, 47, p. 26028-26035 8 p.

研究成果: ジャーナルへの寄稿記事

Martensitic transformations
martensitic transformation
plastic properties
Plasticity
steels

Development of carbon nanotube/rubber composite materials with excellent high pressure hydrogen characteristics

Takeyama, Y., Ueno, M., Uejima, M., Fujiwara, H. & Nishimura, S., 1 1 2019, : : KOBUNSHI RONBUNSHU. 76, 4, p. 288-296 9 p.

研究成果: ジャーナルへの寄稿記事

公開
High pressure engineering
Carbon Nanotubes
Rubber
Glass ceramics
Polymer blends
3 引用 (Scopus)

Development of paper-structured catalyst for application to direct internal reforming solid oxide fuel cell fueled by biogas

Nguyen, T. G. H., Sakamoto, M., Uchida, T., Doan, D. C. T., Dang, M. C., Tu, P. H., Sasaki, K. & Shiratori, Y., 4 23 2019, : : International Journal of Hydrogen Energy. 44, 21, p. 10484-10497 14 p.

研究成果: ジャーナルへの寄稿記事

Biogas
solid oxide fuel cells
Reforming reactions
Solid oxide fuel cells (SOFC)
catalysts

Drop Evaporation on Rough Hot-Spots: Effect of Wetting Modes

Zhang, H., Kita, Y., Zhang, D., Nagayama, G., Takata, Y., Sefiane, K. & Askounis, A., 1 1 2019, (受理済み/印刷中) : : Heat Transfer Engineering.

研究成果: ジャーナルへの寄稿記事

wetting
Wetting
Evaporation
evaporation
cooling
1 引用 (Scopus)

Dropwise Condensation on Multiscale Bioinspired Metallic Surfaces with Nanofeatures

Orejon, D., Askounis, A., Takata, Y. & Attinger, D., 7 10 2019, : : ACS Applied Materials and Interfaces. 11, 27, p. 24735-24750 16 p.

研究成果: ジャーナルへの寄稿記事

Condensation
Surface roughness
Coatings
Wetting
Adhesion
公開
Electron diffraction
Plastic deformation
plastics
Imaging techniques
Electrons
stress intensity factors
Steel
Stress Intensity Factor
Stress intensity factors
Crack closure
Tooth Socket
Tooth Extraction
Bone and Bones
Injections
Osteoblasts
1 引用 (Scopus)

Effect of Copper Addition on Precipitation Behavior near Grain Boundary in AlZnMg Alloy

Matsuda, K., Yasumoto, T., Bendo, A., Tsuchiya, T., Lee, S., Nishimura, K., Nunomura, N., Marioara, C. D., Levik, A., Holmestad, R., Toda, H., Yamaguchi, M., Ikeda, K. I., Homma, T. & Ikeno, S., 1 1 2019, : : Materials Transactions. 60, 8, p. 1688-1696 9 p.

研究成果: ジャーナルへの寄稿記事

公開
Precipitates
Copper
precipitates
Grain boundaries
hardness
1 引用 (Scopus)

Effect of defects on the fatigue limit of Ni-based superalloy 718 with different grain sizes

Kevinsanny, Okazaki, S., Takakuwa, O., Ogawa, Y., Okita, K., Funakoshi, Y., Yamabe, J., Matsuoka, S. & Matsunaga, H., 5 1 2019, : : Fatigue and Fracture of Engineering Materials and Structures. 42, 5, p. 1203-1213 11 p.

研究成果: ジャーナルへの寄稿記事

Superalloys
Fatigue of materials
Defects
Cracks
Microstructure
Coal combustion
Fuel burners
Turbulent flow
Reaction rates
Computational fluid dynamics

Effect of Frequency in Vibration Stimulation for Human Elbow Extension Motion Change: A Fundamental Study for Upper-Limb Perception-Assist

Kiguchi, K. & Honda, K., 1 16 2019, Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 391-396 6 p. 8616071. (Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018).

研究成果: 著書/レポートタイプへの貢献会議での発言

Elbow
Vibration
Upper Extremity
Elbow Joint
Experiments
boiling
Boiling liquids
Heat flux
heat flux
Heating