機械工学部門

研究成果 1979 2020

フィルター
会議での発言
2005

Experimental analyses of linear-type aerospike nozzles with sidewalls

Mori, H., Niimi, T., Taniguchi, M., Nishihira, R. & Fukushima, A., 12 1 2005, ICIASF'05 Record - 21st International Congress on Instrumentation in Aerospace Simulation Facilities, 2005. p. 145-149 5 p. 1569916. (ICIASF Record, International Congress on Instrumentation in Aerospace Simulation Facilities; 巻数 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

nozzles
Nozzles
Flow fields
flow distribution
pressure ratio
1 引用 (Scopus)

Experimental investigation of heat transfer in square and circular minichannel air flow for wide range of pressure ratio

Hara, K., Furukawa, M. & Akihiro, N., 11 21 2005, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005. p. 381-388 8 p. ICMM2005-75184. (Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005; 巻数 PART A).

研究成果: 著書/レポートタイプへの貢献会議での発言

Heat transfer coefficients
Heat transfer
Air
Pipe flow
Copper
1 引用 (Scopus)

Experimental study of forced convective boiling heat transfer for refrigerants in a horizontal, spirally grooved steel tube

Momoki, S., Higashiiue, S., Shigechi, T., Yamaguchi, T. & Mori, H., 2005, ECOS 2005 - Proceedings of the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems. Tapir Academic Press, p. 897-904 8 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Refrigerants
Boiling liquids
Heat transfer coefficients
Heat transfer
Steel

Experimental study of rotational nonequilibrium in low density N 2 jets using REMPI

Niimi, T., Mori, H., Akiyama, I. & Tsuzuki, T., 5 16 2005, RAREFIED GAS DYNAMICS: 24th International Symposium on Rarefied Gas Dynamics, RGD24. p. 1025-1030 6 p. (AIP Conference Proceedings; 巻数 762).

研究成果: 著書/レポートタイプへの貢献会議での発言

nitrogen
ionization
photons
sonic nozzles
plots
40 引用 (Scopus)

Fixed-step friction simulation: From classical coulomb model to modern continuous models

Kikuuwe, R., Takesue, N., Sano, A., Mochiyama, H. & Fujimoto, H., 12 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 3910-3917 8 p. 1545579. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

研究成果: 著書/レポートタイプへの貢献会議での発言

Friction
Computer simulation
Hysteresis
Experiments
13 引用 (Scopus)

Garage parking planning and control of car-like robot using a real time optimization method

Yamamoto, M., Hayashi, Y. & Mohri, A., 12 1 2005, 2005 IEEE International Symposium on Assembly and Task Planning, ISATP. p. 248-253 6 p. 1511481. (Proceedings of the IEEE International Symposium on Assembly and Task Planning; 巻数 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Railroad cars
Robots
Planning
Tires
Kinematics
21 引用 (Scopus)

Haptic illusions induced by moving line stimuli

Mochiyama, H., Sano, A., Takesue, N., Kikuuwe, R., Fujita, K., Fukuda, S., Marui, K. & Fujimoto, H., 1 1 2005, Proceedings - 1st Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems; World Haptics Conference, WHC 2005. Institute of Electrical and Electronics Engineers Inc., p. 645-648 4 p. 1407040. (Proceedings - 1st Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems; World Haptics Conference, WHC 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Wire
10 引用 (Scopus)

Heat transfer study under supercritical pressure conditions for single rod test section

Mori, H., Yoshida, S., Morooka, S. & Komita, H., 2005, Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. 巻 3. p. 1548-1556 9 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Heat transfer
Boilers
Water
Pipe flow
Coolants
8 引用 (Scopus)

Influence of inclusions on fatigue characteristics of non-combustible Mg alloy

Kitahara, Y., Shimazaki, H., Yabu, T., Noguchi, H., Sakamoto, M. & Ueno, H., 12 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 359-362 4 p. (Materials Science Forum; 巻数 482).

研究成果: 著書/レポートタイプへの貢献会議での発言

Fatigue of materials
Ignition
Particle size analysis
Machining
1 引用 (Scopus)

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., 12 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 1704-1709 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; 巻数 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Centrifugal pumps
Two phase flow
Flow rate
Air
Water

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., 12 19 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. p. 59-64 6 p. FEDSM2005-77388. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; 巻数 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

Centrifugal pumps
Two phase flow
Flow rate
Air
Water
4 引用 (Scopus)

Investigation of flooding phenomena in PEMFC by two-phase flow numerical simulation

Ito, K., Masuda, H., Miyazaki, T., Kakimoto, Y. & Masuoka, T., 11 21 2005, Proceedings of the 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005. Shah, R. K., Ubong, E. U. & Samuelsen, S. S. (版). p. 19-24 6 p. FUELCELL-74170. (Proceedings of the 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Proton exchange membrane fuel cells (PEMFC)
Two phase flow
Computer simulation
Current density
Water

Isostatic powder compaction process with bingham semi-solid/fluid mold material

Tsumori, F. & Shima, S., 12 1 2005, Advances in Powder Metallurgy and Particulate Materials - 2005, Proceedings of the 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005. p. 157-169 13 p. (Advances in Powder Metallurgy and Particulate Materials - 2005, Proceedings of the 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Powders
Compaction
Fluids
Pressurization
pressurizing
1 引用 (Scopus)

Low-temperature direct flip-chip bonding for integrated micro-systems

Higurashi, E., Suga, T. & Sawada, R., 2005, 18th Annual Meeting of the IEEE Lasers and Electro-Optics Society, LEOS 2005. 巻 2005. p. 121-122 2 p. 1547908

研究成果: 著書/レポートタイプへの貢献会議での発言

Surface emitting lasers
Temperature
Plasmas
Substrates
Shear strength
7 引用 (Scopus)

Low-temperature LD direct bonding for highly functional optical MEMS

Higurashi, E., Itoh, T., Suga, T. & Sawada, R., 2005, IEEE/LEOS Optical MEMS 2005: International Conference on Optical MEMS and Their Applications. p. 201-202 2 p. 1540149

研究成果: 著書/レポートタイプへの貢献会議での発言

MOEMS
Surface emitting lasers
Temperature
Plasmas
Substrates
1 引用 (Scopus)

Micro-stereolithography of dot shapes for lightguide using LCD grayscale mask

Imahori, H., Miyoshi, T., Takaya, Y. & Hayashi, T., 12 1 2005, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Stereolithography
Liquid crystal displays
Masks
Microfabrication
Fabrication

Modification of microscopic zirconia surface structure for improvement in tribological characteristics of uhmwpe-on-zirconia sliding pair for joint prostheses

Sawae, Y., Murakami, T., Qiwei, H. & Sawano, T., 2005, Proceedings of the World Tribology Congress III - 2005. p. 661-662 2 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Joint prostheses
Ultrahigh molecular weight polyethylenes
Surface structure
Zirconia
Crystal microstructure
4 引用 (Scopus)

Numerical simulation of molten-slag flow in coal gasifier

Otaka, M., Watanabe, H. & Hara, S., 11 21 2005, Proceedings of the ASME Power Conference, 2005: Includes Papers from the 2005 International Conference on Power Engineering, ICOPE. p. 1471-1476 6 p. PWR2005-50370. (Proceedings of the ASME Power Conference, 2005; 巻数 PART B).

研究成果: 著書/レポートタイプへの貢献会議での発言

Slags
Molten materials
Coal
Computer simulation
Discharge (fluid mechanics)

On-demand droplet spotter for formation of micropattern using electrostatic force

Tsumori, F., Ogawa, H. & Shima, S., 12 1 2005, Advances in Powder Metallurgy and Particulate Materials - 2005, Proceedings of the 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005. p. 96-107 12 p. (Advances in Powder Metallurgy and Particulate Materials - 2005, Proceedings of the 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Electrostatic force
Polydimethylsiloxane
electrostatics
metal particles
Substrates

Quality improvement of micro metal injection moulding using micro/nano powders

Nishiyabu, K., Kakishita, K., Osada, T., Matsuzaki, S. & Tanaka, S., 1 1 2005, Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), p. 357-363 7 p. (Euro PM 2005: Powder Metallurgy Congress and Exhibition; 巻数 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

Metal molding
Copper powder
injection molding
Injection molding
Powders
1 引用 (Scopus)

Rolling contact fatigue of bearing steel in hydrogen environment

Tanaka, H., Sugimura, J., Hashimoto, M. & Yamamoto, Y., 12 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 155-156 2 p. (Proceedings of the World Tribology Congress III - 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Bearings (structural)
Fatigue of materials
Hydrogen
Steel
1 引用 (Scopus)

Safe automatic emergency stop control of gantry crane including moving obstacles in its workspace

Yamamoto, M., Honda, E. & Mohri, A., 12 1 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation. p. 253-258 6 p. 1570128. (Proceedings - IEEE International Conference on Robotics and Automation; 巻数 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Gantry cranes
Cranes
Collision avoidance
Experiments
9 引用 (Scopus)

Sensory-motor control of a muscle redundant arm for reaching movements - Convergence analysis and gravity compensation

Tahara, K., Luo, Z. W., Arimoto, S. & Kino, H., 12 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 2870-2875 6 p. 1545411. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

研究成果: 著書/レポートタイプへの貢献会議での発言

Muscle
Gravitation
Compensation and Redress
Computer simulation
Invariance

Simulation of powder behavior based on discrete model taking account of surface effect of particles

Tsumori, F., Hayakawa, K. & Shima, S., 12 1 2005, Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII. PART 1 版 p. 591-594 4 p. (Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII; 番号 PART 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Surface Effects
Discrete Model
Powder
Adhesion
Powders
1 引用 (Scopus)

Stability-optimized clearance configuration of fluid-film journal bearings

Matsuda, K., Kanemitsu, Y. & Kijimoto, S., 12 1 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. p. 1097-1105 9 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; 巻数 1 B).

研究成果: 著書/レポートタイプへの貢献会議での発言

Bearings (structural)
Journal bearings
Fluids
Rotors
Fourier series

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. 巻 2. p. 567-573 7 p. FEDSM2005-77387

研究成果: 著書/レポートタイプへの貢献会議での発言

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction
4 引用 (Scopus)

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 12 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 2161-2167 7 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; 巻数 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction

Surface activated flip-chip bonding of laser chips

Higurashi, E., Suga, T., Nakagawa, M. & Sawada, R., 2005, Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005. 巻 PART A. p. 793-796 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Lasers
Surface emitting lasers
Plasmas
Substrates
Shear strength

The cooperative effects of protein and lipid on wear behavior of ultra-high molecular weight polyethylene

Sawae, Y. & Murakami, T., 12 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 663-664 2 p. (Proceedings of the World Tribology Congress III - 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Ultrahigh molecular weight polyethylenes
Lipids
Wear of materials
Proteins
Lubricants

The potential of touch technology

Mochiyama, H., Sano, A., Takesue, N., Kikuuwe, R. & Fujimoto, H., 12 1 2005, 2005 IEEE Workshop on Advanced Robotics and its Social Impacts. p. 210-213 4 p. 1511653. (2005 IEEE Workshop on Advanced Robotics and its Social Impacts; 巻数 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Display devices
Textures
Inspection
Wire
Sensors

Thermal analysis on filling process in hydrogen tank

Koshimizu, T., Takata, Y., Kasao, D. & Monde, M., 12 1 2005, Proceedings of the ASME Heat Transfer Division 2005. 1 版 p. 141-148 8 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; 巻数 376 HTD, 番号 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Thermoanalysis
Hydrogen
Gases
Temperature
Numerical analysis
3 引用 (Scopus)

Three dimensional heat transmission simulation of supercritical pressure fluid

Kitou, K., Chaki, M., Ishii, Y., Matsuura, M., Shioiri, A., Mori, H. & Yoshida, S., 2005, Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. 巻 4. p. 2255-2264 10 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Fluids
Turbulence models
Hot Temperature
Water
8 引用 (Scopus)

Tracking assist system using virtual friction field

Takesue, N., Kikuuwe, R., Sano, A., Mochiyama, H. & Fujimoto, H., 12 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 2134-2139 6 p. 1545292. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

研究成果: 著書/レポートタイプへの貢献会議での発言

Friction
Industrial plants
Experiments
3 引用 (Scopus)

True-3D strain mapping for assessment of material deformation by synchrotron X-ray microtomography

Ahn, J. J., Toda, H., Niinomi, M., Kobayashi, T., Akahori, T. & Uesugi, K., 4 9 2005, Review of Progress in Quantitative Nondestructive Evaluation Volume 24. p. 1423-1430 8 p. (AIP Conference Proceedings; 巻数 760).

研究成果: 著書/レポートタイプへの貢献会議での発言

synchrotrons
tensile deformation
wire
x rays
strain measurement

Wear reduction by functional protein boundary film on Poly(vinyl alcohol) hydrogel

Nakashima, K., Sawae, Y. & Murakami, T., 12 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 655-656 2 p. (Proceedings of the World Tribology Congress III - 2005).

研究成果: 著書/レポートタイプへの貢献会議での発言

Hydrogels
Alcohols
Wear of materials
Proteins
Joint prostheses
2004

Activated wear by lubricant constituents in boundary lubrication and protective role of boundary lubrication in joint prostheses

Murakami, T., Sawae, Y., Doi, S., Yamamoto, K. & Takahara, A., 12 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

研究成果: 著書/レポートタイプへの貢献会議での発言

Joint prostheses
Lubrication
Lubricants
Wear of materials
Ultrahigh molecular weight polyethylenes
13 引用 (Scopus)

Actuated artificial joints for human motion assist - An inner skeleton robots

Kiguchi, K., 12 1 2004, 2004 1st IEEE Technical Exhibition Based Conference on Robotics and Automation - proceedings, TExCRA 2004. p. 29-30 2 p. (2004 1st IEEE Technical Exhibition Based Conference on Robotics and Automation, Proceedings, TExCRA 2004).

研究成果: 著書/レポートタイプへの貢献会議での発言

Robots
Industry
3 引用 (Scopus)

Effect of protein contained in lubricant for wear properties of pva hydrogel as artificial cartilage

Nakashima, K., Murakami, T. & Sawae, Y., 12 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

研究成果: 著書/レポートタイプへの貢献会議での発言

Cartilage
Hydrogels
Lubricants
Wear of materials
Polyvinyl acetates
2 引用 (Scopus)

Effects of lipids and proteins on wear of prosthetic hip joint materials

Sawae, Y., Murakami, T. & Sawano, T., 2004, Transactions - 7th World Biomaterials Congress. p. 342 1 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Prosthetics
Lipids
Wear of materials
Proteins
Joint prostheses
2 引用 (Scopus)

Forearm motion assist with an exoskeleton adaptation to muscle activation patterns

Kiguchi, K., Esaki, R. & Fukuda, T., 12 1 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). p. 2948-2953 6 p. (2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS); 巻数 3).

研究成果: 著書/レポートタイプへの貢献会議での発言

Muscle
Chemical activation
Fuzzy control
Patient rehabilitation
Experiments
2 引用 (Scopus)

Nanostructuring of PEFC electrode catalysts using carbon nanofibers

Sasaki, K., Shinya, K., Tanaka, S., Furukawa, A., Ando, K., Kuroki, T., Kusaba, H. & Teraoka, Y., 12 1 2004, Proton Conducting Membrane Fuel Cells IV - Proceedings of the International Symposium. p. 159-170 12 p. (Proceedings - Electrochemical Society; 巻数 PV 2004-21).

研究成果: 著書/レポートタイプへの貢献会議での発言

Carbon nanofibers
Fuel cells
Electrolytes
Electrodes
Catalysts

Novel hydrides with [Al-H] bonding synthesized by hydrogenation of intermetallic compounds

Akiba, E., An, Z. Q. & Nakamura, Y., 7 14 2004, Advanced Materials for Energy Conversion II. Chandra, D., Bautista, R. G. & Schlabach, L. (版). p. 83-90 8 p. (Advanced Materials for Energy Conversion II).

研究成果: 著書/レポートタイプへの貢献会議での発言

Hydrides
Hydrogenation
Intermetallics
Binary alloys
Hydrogen

Pressure sensitive luminophores for micro-and nano-systems

Mori, H., Niimi, T., Hirako, M. & Uenishi, H., 12 1 2004, Proc. of the 2004 Int. Symp. on Micro-NanoMechatronics and Human Sci., MHS2004; The Fourth Symp. 'Micro-NanoMechatronics for an Inf.-Based Soc. 'The 21st Century COE Program, Nagoya Univ., Micro-Nano. p. 225-230 6 p. (Proceedings of the 2004 International Symposium on Micro-NanoMechatronics and Human Science, MHS2004; The Fourth Symposium 'Micro-NanoMechatronics for and Information-Based Society' The 21st Century).

研究成果: 著書/レポートタイプへの貢献会議での発言

Paint
Pressure distribution
Flow of gases
Flow fields
Photons
2 引用 (Scopus)

Relationship between temperature distribution in EHL film and dimple formation

Yagi, K., Kyogoku, K. & Nakahara, T., 12 1 2004, Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004. PART A 版 p. 459-468 10 p. (Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004; 番号 PART A).

研究成果: 著書/レポートタイプへの貢献会議での発言

Elastohydrodynamic lubrication
Temperature distribution
Film thickness
Interferometry
Sapphire
2 引用 (Scopus)

Study on Joule-Thomson micro-cooler

Naganuma, K., Takata, Y., Kubota, H. & Takahashi, K., 9 29 2004, Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004). Kandlikar, S. G., Celata, G. P., Nishio, S., Stephan, P. & Thonon, B. (版). p. 769-772 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Refrigerants
Capillary tubes
Evaporators
Silicones
Etching
1 引用 (Scopus)

Transient response analysis of polymer electrolyte fuel cell considering equivalent circuit, mass and heat conservation

Ito, K., Koori, H., Onda, K., Masuda, H. & Masuoka, T., 9 13 2004, Fuel Cell Science, Engineering and Technology - 2004. Shah, R. K. & Kandlikar, S. G. (版). p. 85-92 8 p. (Fuel Cell Science, Engineering and Technology - 2004).

研究成果: 著書/レポートタイプへの貢献会議での発言

Transient analysis
Equivalent circuits
Fuel cells
Conservation
Electrolytes
2003
2 引用 (Scopus)

Development of air/water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Okuma, K., Ohshita, S. & Watanabe, S., 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 1, part B, Forums. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (版). 巻 1 B. p. 1413-1418 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Centrifugal pumps
Two phase flow
Flow rate
Water
Pumps
15 引用 (Scopus)

Experiments and simple modelling of hydrodynamic lubrication in radial shaft seals

Sato, Y., Seki, K., Sugimura, J. & Yamamoto, Y., 12 1 2003, 17th International Conference on Fluid Sealing. Hoyes, J. (版). p. 139-156 18 p. (International Conference on Fluid Sealing).

研究成果: 著書/レポートタイプへの貢献会議での発言

Lubrication
Seals
Rubber
Hydrodynamics
Surface roughness
3 引用 (Scopus)

Experiments of grasping and object-manipulation by a pair of multi-degrees of freedom robot fingers

Nakamura, S., Tahara, K., Bae, J. H., Sekimoto, M. & Arimoto, S., 1 1 2003, Proceedings - 2003 IEEE International Symposium on Computational Intelligence in Robotics and Automation: Computational Intelligence in Robotics and Automation for the New Millennium. Institute of Electrical and Electronics Engineers Inc., p. 1162-1167 6 p. 1222161. (Proceedings of IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA; 巻数 3).

研究成果: 著書/レポートタイプへの貢献会議での発言

Sensory feedback
Grasping
Manipulation
Robot
Degree of freedom

Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin

Ohama, S., Yoshimura, T. & Noguchi, H., 12 1 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (版). p. 55-63 9 p. (Advances in Damage Mechanics).

研究成果: 著書/レポートタイプへの貢献会議での発言

Skin
Fatigue of materials
Aluminum
Microstructure
Vickers hardness