機械工学部門

研究成果 1978 2020

フィルター
会議での発言
1992
4 引用 (Scopus)

Method of analysis for two-dimensional stationary thermoelastic problems by body force method

Nisitani, H., Saimoto, A., Noguchi, H. & Chen, D. H., 1992, American Society of Mechanical Engineers, EEP. Publ by ASME, 巻 1. p. 437-446 10 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Temperature distribution
Heat transfer
Cracks
Temperature
Hot Temperature
1991

A comparison of evaporation heat transfer coefficients and pressure drop in a horizontal smooth tube for HFC134a and CFC12

Takamatsu, H., Momoki, S. & Tetsu, F., 8 1991, 18th International Congress of Refrigeration. 巻 2. p. 444-448 5 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

An experiment on a vapor compression heat pump system using nonazeotropic refrigerant mixtures

Takamatsu, H., Koyama, S., Yara, T. & Ikegami, Y., 8 1991, 18th International Congress of Refrigeration. 巻 2. p. 592-596 5 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

Fluid flow tomography of reinjection well by the vertical electric profiling method in Kazuno area, Akita prefecture, Japan

Ushijima, K., Mizunaga, H., Mori, H., Hattori, A. & Tajima, T., 12 1 1991, Transactions - Geothermal Resources Council. Publ by Geothermal Resources Council, p. 297-299 3 p. (Transactions - Geothermal Resources Council; 巻数 15).

研究成果: 著書/レポートタイプへの貢献会議での発言

Oil well casings
fluid flow
tomography
Tomography
Flow of fluids
3 引用 (Scopus)

Heat transfer to non-azeotropic mixtures of refrigerants flowing in a horizontal evaporator tube

Yoshida, S., Mori, H., Matsunaga, T. & Ohishi, K., 12 1 1991, Proc 3 ASME JSME Therm Eng Jt Conf. Publ by ASME, p. 295-300 6 p. (Proc 3 ASME JSME Therm Eng Jt Conf).

研究成果: 著書/レポートタイプへの貢献会議での発言

Refrigerants
Evaporators
Heat transfer
Forced convection
Two phase flow

Planning method of collision-free trajectory for two manipulators

Marushima, S., Yamamoto, M. & Mohri, A., 12 1 1991, Intelligence for Mechanical Systems. IEEE, p. 547-552 6 p. (Intelligence for Mechanical Systems; 巻数 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

Manipulators
Trajectories
Planning
Torque
1 引用 (Scopus)

Study on an opposed-injection stratified-charge combustion system

Kitagawa, T., Kido, H. & Ishida, H., 1991, ASME/JSME Thermal Engineering Joint Conference. Publ by ASME, p. 253-258 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Stratified charge engines
Hydrocarbons
Jet fuel
Fuel injection
Direct injection

Unsteady Navier-Stokes Simulation of transonic cascade flow using an unfactored implicit upwind relaxation scheme with inner iterations

Furukawa, M., Nakano, T. & Inoue, M., 1 1 1991, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Unsteady flow
Fluxes
Cascades (fluid mechanics)
Vortex shedding
Turbulence models
1990

A zonal approach for Navier-stokes computations of compressible cascade flow fields using a tvd finite volume method

Furukawa, M., Yamasaki, M. & Inoue, M., 1 1 1990, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; 巻数 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Finite volume method
Flow fields
Fluxes
Viscous flow
Cascades (fluid mechanics)
1989
6 引用 (Scopus)

Plasma jet ignition in turbulent lean mixtures

Murase, E., Ono, S., Hanada, K. & Nakahara, S., 12 1 1989, International Congress and Exposition.

研究成果: 著書/レポートタイプへの貢献会議での発言

Plasma jets
Ignition
Flammability
Combustion chambers
Orifices
1988

Forced convective boiling of nonazeotropic refrigerant miztures of R22 and R114 inside a horizontal tube

Takamatsu, H., Miyara, A., Koyama, S. & Tetsu, F., 11 1988, 1st KSME/JSME Thermal Fluids Engineering Confrence. 巻 1. p. 138-143 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

1987

A numerical analysis of free convection around an isothermal sphere (Effects of space and prandtl number)

Takamatsu, H., Fujii, M. & Tetsu, F., 3 1987, 2nd ASME/JSME Thermal Engineering Conference. 巻 4. p. 55-60 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

COMBUSTION ENHANCEMENT OF LEAN MIXTURES BY PLASMA JET IGNITION.

Ono, S., Murase, E., Hanada, K. & Shimizu, R., 1 1 1987, Unknown Host Publication Title. ASME, 巻 4. p. 245-252 8 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Plasma jets
Ignition
Ignition systems
Orifices
Plasmas
13 引用 (Scopus)

NUMERICAL ANALYSIS OF FREE CONVECTION AROUND AN ISOTHERMAL SPHERE (EFFECTS OF SPACE AND PRANDTL NUMBER).

Fujii, M., Takamatsu, H. & Fujii, T., 1987, Unknown Host Publication Title. ASME, 巻 4. p. 55-60 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Prandtl number
Natural convection
Numerical analysis
Nusselt number
Heat transfer coefficients
17 引用 (Scopus)

Piston slap induced noise and vibration of internal combustion engines (1st Report, Theoretical Analysis and Simulation)

Ohta, K., Irie, Y., Yamamoto, K. & Ishikawa, H., 12 1 1987, SAE Technical Papers.

研究成果: 著書/レポートタイプへの貢献会議での発言

Engine cylinders
Internal combustion engines
Pistons
Equations of motion
Diesel engines
1986
2 引用 (Scopus)

EFFECTS OF AN INSULATION LAYER ON THE PROPAGATION OF A NORMAL ZONE IN SUPERCONDUCTING WIRES BELOW 4. 2 K.

Funaki, K., Takata, Y., Takeo, M., Irie, F., Ruppert, U., Yang, W. Z., Kristen, E., Lueders, K. & Klipping, G., 12 1 1986, Proceedings of the International Cryogenic Engineering Conference. Klipping, G. & Klipping, I. (版). Engl, p. 730-734 5 p. (Proceedings of the International Cryogenic Engineering Conference).

研究成果: 著書/レポートタイプへの貢献会議での発言

Insulated wire
Superconducting wire
Insulation
Wire
Numerical analysis
3 引用 (Scopus)

FORCED-CONVECTION HEAT TRANSFER TO SUPERCRITICAL HELIUM FLOWING IN A VERTICAL STRAIGHT CIRCULAR TUBE.

Ito, T., Takata, Y., Kasao, D., Yamaguchi, M. & Hara, T., 12 1 1986, AIChE Symposium Series. 251 版 AIChE, p. 86-91 6 p. (AIChE Symposium Series; 巻数 82, 番号 251).

研究成果: 著書/レポートタイプへの貢献会議での発言

Helium
Forced convection
Heat transfer
Buoyancy
Heat transfer coefficients

Measurement of thermal conductivities of liquid mixtures by using a small bead thermistor

Takamatsu, H., Tetsu, F. & Fujii, M., 11 1986, 1st Asian Thermophysical Properties Conference. p. 462-467 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)

TRANSIENT POOL BOILING HEAT TRANSFER TO HELIUM 4 FROM FLAT SURFACES - 2ND REPORT.

Ito, T., Takata, Y., Kubota, H. & Uesono, M., 1986, Proceedings of the International Cryogenic Engineering Conference. Klipping, G. & Klipping, I. (版). Engl, p. 638-643 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Carbon films
Boiling liquids
Helium
Heat transfer
Heat flux
1984
11 引用 (Scopus)

Mg-Ni ALLOYS AS HYDROGEN TRANSPORTING MEDIA.

Ono, S., Ishido, Y., Akiba, E., Jindo, K., Sawada, Y., Kitagawa, I. & Kakutani, T., 12 1 1984, Advances in Hydrogen Energy. Veziroglu, T. N. & Taylor, J. B. (版). Pergamon Press, p. 1291-1302 12 p. (Advances in Hydrogen Energy; 巻数 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Hydrogen
Gases
Hydrides
Purification
Containers
1983

An experiment on the heat transfer characteristics in the post-burnout region at high subcritical pressures

Takamatsu, H., Suguru, Y., Mori, H. & Nishikawa, K., 3 1983, 1st ASME/JSME Thermal Engeneering Conference. 巻 1. p. 159-164 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)

TENSION AND BENDING OF A SEMI-ELLIPTICAL SURFACE CRACK.

Isida, M. & Noguchi, H., 1983, Unknown Host Publication Title. Sih, G. C., Ryan, N. E. & Jones, R. (版). Martinus Nijhoff Publ, p. 189-192 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Cracks
Boundary layers
Stress intensity factors
Boundary conditions