機械工学部門

研究成果 1979 2020

フィルター
評論記事
2019
1 引用 (Scopus)

Overview of metastability and compositional complexity effects for hydrogen-resistant iron alloys: Inverse austenite stability effects

Koyama, M., Tasan, C. C. & Tsuzaki, K., 6 1 2019, : : Engineering Fracture Mechanics. 214, p. 123-133 11 p.

研究成果: ジャーナルへの寄稿評論記事

Iron alloys
Austenite
Hydrogen
Martensitic transformations
Entropy
2018

Measurement techniques for soot in pulverized coal combustion fields

Tainaka, K., Hashimoto, N., Umemoto, S., Nakatsuka, N., Hayashi, J., Watanabe, H., Akamatsu, F. & Makino, H., 1 1 2018, : : Journal of the Society of Powder Technology, Japan. 55, 5, p. 275-281 7 p.

研究成果: ジャーナルへの寄稿評論記事

Soot
Coal combustion
Lasers
Coal
Volume fraction
2 引用 (Scopus)

Microstructure evolution in a hydrogen charged and aged Al–Zn–Mg alloy

Bendo, A., Matsuda, K., Lee, S., Nishimura, K., Toda, H., Shimizu, K., Tsuru, T. & Yamaguchi, M., 11 1 2018, : : Materialia. 3, p. 50-56 7 p.

研究成果: ジャーナルへの寄稿評論記事

Hydrogen
Microstructure
Electron diffraction
Vacancies
Aspect ratio

Overview of dynamic strain aging and associated phenomena in Fe-Mn-C austenitic steels

Koyama, M., Sawaguchi, T. & Tsuzaki, K., 4 1 2018, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 104, 4, p. 187-200 14 p.

研究成果: ジャーナルへの寄稿評論記事

precipitation hardening
Austenitic steel
Carbon steel
Elongation
Aging of materials
4 引用 (Scopus)

Overview of dynamic strain aging and associated phenomena in Fe-Mn-C austenitic steels

Koyama, M., Sawaguchi, T. & Tsuzaki, K., 8 15 2018, : : isij international. 58, 8, p. 1383-1395 13 p.

研究成果: ジャーナルへの寄稿評論記事

Austenitic steel
Carbon steel
Elongation
Aging of materials
Steel
2 引用 (Scopus)

Randomization of ferrite/austenite orientation relationship and resultant hardness increment by nitrogen addition in vanadium-microalloyed low carbon steels strengthened by interphase precipitation

Zhang, Y., Shinbo, K., Ohmura, T., Suzuki, T., Tsuzaki, K., Miyamoto, G. & Furuhara, T., 1 1 2018, : : isij international. 58, 3, p. 542-550 9 p.

研究成果: ジャーナルへの寄稿評論記事

Vanadium
Low carbon steel
Austenite
Ferrite
Nitrogen
Semiconductor materials
Data storage equipment
2017

Numerical simulation of pulverized coal combustion and gasification

Watanabe, H., 1 1 2017, : : Journal of the Society of Powder Technology, Japan. 54, 2, p. 130-137 8 p.

研究成果: ジャーナルへの寄稿評論記事

Coal combustion
Coal gasification
Computer simulation
Large eddy simulation
Computer hardware
77 引用 (Scopus)

Overview of hydrogen embrittlement in high-Mn steels

Koyama, M., Akiyama, E., Lee, Y. K., Raabe, D. & Tsuzaki, K., 4 27 2017, : : International Journal of Hydrogen Energy. 42, 17, p. 12706-12723 18 p.

研究成果: ジャーナルへの寄稿評論記事

hydrogen embrittlement
Hydrogen embrittlement
steels
Hydrogen
Steel

シンクロトロン放射光を用いた3D/4Dイメージングの現状

Toda, H. & Hirayama, K., 2017, : : ふえらむ. 22, 2, p. 99-103

研究成果: ジャーナルへの寄稿評論記事

2016
41 引用 (Scopus)

Design concept and applications of Fe-Mn-Si-based alloys-from shape-memory to seismic response control

Sawaguchi, T., Maruyama, T., Otsuka, H., Kushibe, A., Inoue, Y. & Tsuzaki, K., 1 1 2016, : : Materials Transactions. 57, 3, p. 283-293 11 p.

研究成果: ジャーナルへの寄稿評論記事

Martensitic transformations
martensitic transformation
Seismic response
Shape memory effect
mechanical properties
55 引用 (Scopus)

Metal boranes: Progress and applications

Hansen, B. R. S., Paskevicius, M., Li, H., Akiba, E. & Jensen, T. R., 9 15 2016, : : Coordination Chemistry Reviews. 323, p. 60-70 11 p.

研究成果: ジャーナルへの寄稿評論記事

Boranes
boranes
Metals
metals
Borohydrides
2015
2 引用 (Scopus)

3D creep cavitation characteristics and residual life assessment in high temperature steels: A critical review

Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., 3 1 2015, : : Materials Science and Technology (United Kingdom). 31, 5, p. 603-626 24 p.

研究成果: ジャーナルへの寄稿評論記事

Steel
cavitation flow
Cavitation
Creep
Tomography
150 引用 (Scopus)

An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design

Tasan, C. C., Diehl, M., Yan, D., Bechtold, M., Roters, F., Schemmann, L., Zheng, C., Peranio, N., Ponge, D., Koyama, M., Tsuzaki, K. & Raabe, D., 7 1 2015, : : Annual Review of Materials Research. 45, p. 391-431 41 p.

研究成果: ジャーナルへの寄稿評論記事

Steel
Microstructure
Processing
Thermomechanical treatment
High strength steel
11 引用 (Scopus)

Biphasic and boundary lubrication mechanisms in artificial hydrogel cartilage: A review

Murakami, T., Yarimitsu, S., Nakashima, K., Sakai, N., Yamaguchi, T., Sawae, Y. & Suzuki, A., 12 1 2015, : : Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 229, 12, p. 864-878 15 p.

研究成果: ジャーナルへの寄稿評論記事

Lubrication
Hydrogel
Cartilage
Hydrogels
Joints
4 引用 (Scopus)

Next-generation robotic surgery - From the aspect of surgical robots developed by industry

Nakadate, R., Arata, J. & Hashizume, M., 1 1 2015, : : Minimally Invasive Therapy and Allied Technologies. 24, 1, p. 2-7 6 p.

研究成果: ジャーナルへの寄稿評論記事

Robotics
Industry
Aptitude
Research
Surgical Instruments

年間レビュー 力学特性

Toda, H., 2015, : : 軽金属. 65, 8, p. 366-368

研究成果: ジャーナルへの寄稿評論記事

2014

Measurements and modeling of pulmonary acinus toward integration of multiscale mechanics in the lung

Wada, S., Koshiyama, K., Xiao, L. & Sera, T., 12 1 2014, : : Respiration and Circulation. 62, 12, p. 1179-1187 9 p.

研究成果: ジャーナルへの寄稿評論記事

Mechanics
Lung
2013

結晶粒の塑性変形挙動の3D/4D追跡技術

Toda, H., 2013, : : 塑性と加工. p. 881-885

研究成果: ジャーナルへの寄稿評論記事

2012

Applications and topics - Introduction to biotribology

Sawae, Y., 4 15 2012, : : Toraibarojisuto/Journal of Japanese Society of Tribologists. 57, 4, p. 270-272 3 p.

研究成果: ジャーナルへの寄稿評論記事

Joint prostheses
lubrication
Lubrication
Skin
Wear of materials
Bearing pads
Chemical mechanical polishing
Semiconductor materials
Industry

Fundamental phenomena - Introduction to boundary and mixed lubrication

Sugimura, J., 3 15 2012, : : Toraibarojisuto/Journal of Japanese Society of Tribologists. 57, 3, p. 147-149 3 p.

研究成果: ジャーナルへの寄稿評論記事

boundary lubrication
tribology
Tribology
lubrication
Lubrication
16 引用 (Scopus)

Influence of processing regimes on fine-grained microstructure development in an AlMgSc alloy by hot equal-channel angular pressing

Sitdikov, O., Avtokratova, E., Babicheva, R., Sakai, T., Tsuzaki, K. & Watanabe, Y., 3 21 2012, : : Materials Transactions. 53, 1, p. 56-62 7 p.

研究成果: ジャーナルへの寄稿評論記事

Equal channel angular pressing
Hot pressing
pressing
microstructure
Microstructure
142 引用 (Scopus)

Nanotechnology in Mg-based materials for hydrogen storage

Shao, H., Xin, G., Zheng, J., Li, X. & Akiba, E., 7 1 2012, : : Nano Energy. 1, 4, p. 590-601 12 p.

研究成果: ジャーナルへの寄稿評論記事

Hydrogen storage
Nanotechnology
Ball milling
Thermodynamics
Kinetics
2011
22 引用 (Scopus)

Three-dimensional strain mapping using in situ X-ray synchrotron microtomography

Toda, H., Maire, E., Aoki, Y. & Kobayashi, M., 10 1 2011, : : Journal of Strain Analysis for Engineering Design. 46, 7, p. 549-561 13 p.

研究成果: ジャーナルへの寄稿評論記事

Microtomography
Synchrotrons
X rays
Three-dimensional
Image resolution

放射光を用いた材料の観察と解析

Toda, H., 2011, : : 軽金属. 61, 1, p. 38-48

研究成果: ジャーナルへの寄稿評論記事

2010

3D/4Dイメージングによるポーラス金属の力学的性質の理解

Toda, H., 2010, : : 金属. 80, 10

研究成果: ジャーナルへの寄稿評論記事

6 引用 (Scopus)

Effects of trace impurities in hydrogen environment on tribological properties of steels

Fukuda, K., Hashimoto, M. & Sugimura, J., 3 11 2010, : : Toraibarojisuto/Journal of Japanese Society of Tribologists. 55, 1, p. 53-61 9 p.

研究成果: ジャーナルへの寄稿評論記事

Steel
Hydrogen
steels
Impurities
impurities

Technology for MEMS commercialization: Current status and future prospects

Sawada, R. & Higurashi, E., 1 1 2010, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 76, 5, p. 491-497 7 p.

研究成果: ジャーナルへの寄稿評論記事

Micromachining
MEMS
2009
14 引用 (Scopus)

Microdamage detection and repair in bone: Fracture mechanics, histology, cell biology

Hazenberg, J. G., Hentunen, T. A., Heino, T. J., Kurata, K., Lee, T. C. & Taylor, D., 6 19 2009, : : Technology and Health Care. 17, 1, p. 67-75 9 p.

研究成果: ジャーナルへの寄稿評論記事

Cytology
Histology
Bone Fractures
Mechanics
Fracture mechanics
2007
2 引用 (Scopus)

Trend of semiconductor devices and planarization technology with future development

Doi, T., Hiyama, H., Fukuda, A. & Kurokawa, S., 12 1 2007, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 73, 7, p. 745-750 6 p.

研究成果: ジャーナルへの寄稿評論記事

Chemical mechanical polishing
Semiconductor devices
2006
20 引用 (Scopus)

3-D image-based mechanical simulation of aluminium foams: Effects of internal microstructure

Toda, H., Takata, M., Ohgaki, T., Kobayashi, M., Kobayashi, T., Uesugi, K., Makii, K. & Aruga, Y., 6 1 2006, : : Advanced Engineering Materials. 8, 6, p. 459-467 9 p.

研究成果: ジャーナルへの寄稿評論記事

Aluminum
foams
Foams
aluminum
microstructure

Evalution of drop strength due to thermal degradation for BGA-IC package

Kim, Y. B., Noguchi, H. & Amagai, M., 1 1 2006, : : Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 72, 2, p. 186-191 6 p.

研究成果: ジャーナルへの寄稿評論記事

Soldering alloys
Pyrolysis
Impact strength
Copper compounds
Intermetallics
2005
15 引用 (Scopus)

Molecular dynamics study of the adhesion between end-grafted polymer films

Morita, H., Yamada, M., Yamaguchi, T. & Doi, M., 12 19 2005, : : Polymer Journal. 37, 10, p. 782-788 7 p.

研究成果: ジャーナルへの寄稿評論記事

Polymer films
Molecular dynamics
Polymers
Adhesion
Temperature
2 引用 (Scopus)

Numerical simulation of heat and fluid flow in basic pulse tube refrigerator

Koshimizu, T., Kubota, H., Takata, Y. & Ito, T., 10 10 2005, : : International Journal of Numerical Methods for Heat and Fluid Flow. 15, 7, p. 617-630 14 p.

研究成果: ジャーナルへの寄稿評論記事

Refrigerators
Heat Flow
Fluid Flow
Flow of fluids
Refrigeration
12 引用 (Scopus)

Photographic observation and emission spectral analysis of HCCI combustion

Murase, E., Hanada, K., Miyaura, T. & Ikeda, J., 9 1 2005, : : Combustion Science and Technology. 177, 9, p. 1699-1723 25 p.

研究成果: ジャーナルへの寄稿評論記事

Spectrum analysis
ignition
spectrum analysis
Ignition
flames
2004
4 引用 (Scopus)

Bone quantity and quality to its mechanical integrity

Mawatari, T., Miura, H., Kawano, T., Hamai, S., Tsukamoto, N., Shuto, T., Nakashima, Y., Iwamoto, Y., Higaki, H., Kurata, K. & Sakai, S., 1 1 2004, : : Clinical calcium. 14, 4, p. 555-560 6 p.

研究成果: ジャーナルへの寄稿評論記事

Bone and Bones
Porosity
Anatomy
Collagen
1 引用 (Scopus)

EHL film thickness formulae

Sugimura, J., 12 22 2004, : : Toraibarojisuto/Journal of Japanese Society of Tribologists. 49, 10, p. 799-800 2 p.

研究成果: ジャーナルへの寄稿評論記事

Elastohydrodynamic lubrication
Point contacts
Film thickness
2003

Assessments of damage and fracture behaviours of Al-Mg-Si alloys

Toda, H. & Kobayashi, T., 1 1 2003, : : Keikinzoku/Journal of Japan Institute of Light Metals. 53, 11, p. 469-475 7 p.

研究成果: ジャーナルへの寄稿評論記事

1998
374 引用 (Scopus)

Hydrogen absorption by Laves phase related BCC solid solution

Akiba, E. & Iba, H., 1 1 1998, : : Intermetallics. 6, 6, p. 461-470 10 p.

研究成果: ジャーナルへの寄稿評論記事

Hydrogen
Solid solutions
Metals
Hydrides
Reaction kinetics