研究成果

フィルター
論文
2019

Cavitation simulation of automotive torque converter using a homogeneous cavitation model

Tsutsumi, K., Watanabe, S., Tsuda, S. & Yamaguchi, T., 1 1 2019.

研究成果: 会議への寄与タイプ論文

Cavitation simulation using a new simple homogeneous cavitation model

Watanabe, S., Tsuru, W., Yamamoto, Y. & Tsuda, S. I., 1 1 2019.

研究成果: 会議への寄与タイプ論文

1 引用 (Scopus)
2017

A fundamental study of disappearance phenomenon of partial cavitation on the NACA 16012 hydrofoil

Oodaira, Y., Tsuru, W., Watanabe, S. & Iga, Y., 1 1 2017.

研究成果: 会議への寄与タイプ論文

Optimum aerodynamic design of centrifugal comPressor using a genetic algorithm and an inverse method based on meridional viscous flow analysis

Itou, S., Oka, N., Furukawa, M., Yamada, K., Ibaraki, S., Iwakiri, K. & Hayashi, Y., 1 1 2017.

研究成果: 会議への寄与タイプ論文

2 引用 (Scopus)
2015

CFD analysis of axial thrust in three stages centrifugal pump at design and partload conditions

Hiroyoshi, W., Watanabe, S., Tetsuya, Y. & Yoshinori, H., 1 1 2015.

研究成果: 会議への寄与タイプ論文

6 引用 (Scopus)

Effect of inlet nozzle shape on performance of darrieus-type hydro-turbine operated in small open water channel

Kazuhiko, N., Daisuke, M., Watanabe, S., Tsuda, S. & Akinori, F., 1 1 2015.

研究成果: 会議への寄与タイプ論文

Effects of dissolved gas on unsteady cavitating flow around a clark y-11.7% hydrofoil

Daido, H., Watanabe, S. & Tsuda, S., 1 1 2015.

研究成果: 会議への寄与タイプ論文

1 引用 (Scopus)

Large-scale numerical simulation of unsteady flow field in a half-ducted propeller fan using lattice Boltzmann method

Yamada, K., Kusano, K. & Furukawa, M., 1 1 2015.

研究成果: 会議への寄与タイプ論文

Measurements of axial and radial thrust forces working on a three-stages centrifugal pump rotor

Yamashita, T., Watanabe, S., Hara, Y., Watanabe, H. & Miyagawa, K., 1 1 2015.

研究成果: 会議への寄与タイプ論文

8 引用 (Scopus)

Measurement technique for unsteady low-speed flow fields using poly(TMSP)-based pressure sensitive paint

Mori, H., Maeda, K., Furukawa, M. & Akiyoshi, M., 1 1 2015.

研究成果: 会議への寄与タイプ論文

Numerical investigation on performance of contra-rotating axial flow pump with different rear rotor design

Honda, H., Cao, L., Watanabe, S., Tsuda, S. I. & Furukawa, A., 1 1 2015.

研究成果: 会議への寄与タイプ論文

2004

Effect of tip clearance on stall evolution process in a low-speed axial compressor stage

Inoue, M., Yoshida, S., Yamada, K., Kuroumaru, M., Minami, T. & Furukawa, M., 12 22 2004, p. 385-394. 10 p.

研究成果: 会議への寄与タイプ論文

35 引用 (Scopus)

Unsteady three-dimensional flow phenomena due to breakdown of tip leakage vortex in a transonic axial compressor rotor

Yamada, K., Furukawa, M., Nakano, T., Inoue, M. & Funazaki, K., 12 22 2004, p. 515-526. 12 p.

研究成果: 会議への寄与タイプ論文

48 引用 (Scopus)
2003

Studies on Effects of Periodic Wake Passing upon a Blade Leading Edge Separation Bubble: Experimental Investigation using a Simple Leading Edge Model

Funazaki, K., Yamada, K. & Kato, Y., 12 1 2003, p. 761-769. 9 p.

研究成果: 会議への寄与タイプ論文

2002

Physics of tip clearance flow in turbomachinery

Inoue, M. & Furukawa, M., 1 1 2002, p. 777-789. 13 p.

研究成果: 会議への寄与タイプ論文

27 引用 (Scopus)
1995

Numerical simulation of three-dimensional viscous flow in diagonal flow impeller

Furukawa, M., Saiki, K. & Inoue, M., 12 1 1995, p. 29-36. 8 p.

研究成果: 会議への寄与タイプ論文

18 引用 (Scopus)