研究成果 1989 2020

2020

Evaluation of Feel of Fishing Reel by Elucidating the Relationship Between Tactile Sensation and Gear Vibration

Inoue, T. & Kurokawa, S., 1 1 2020, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design. Fukuda, S. (版). Springer Verlag, p. 154-164 11 p. (Advances in Intelligent Systems and Computing; 巻数 952).

研究成果: 著書/レポートタイプへの貢献会議での発言

Gears
Reels
Gear teeth
Time delay
2019

Attempts on pico-precision machining via combination of ELID-grinding and polishing

Ohmori, H., Kim, Y., Uehara, Y., Kasuga, H., Ono-Kato, T., Lin, W., Kurokawa, S. & Umezu, S., 1 1 2019, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 304-309 6 p.

研究成果: ジャーナルへの寄稿記事

Polishing
Machining

Bio-mimic motion of 3D-printed gel structures dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., 1 1 2019, : : Journal of the Electrochemical Society. 166, 9, p. B3235-B3239

研究成果: ジャーナルへの寄稿記事

公開
Particles (particulate matter)
Gels
Actuators
Magnetic fields
Magnetic anisotropy
1 引用 (Scopus)

Bio-mimic motion of gel material dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., 1 1 2019, ECS Transactions. Nagahara, L., Masubuchi, Y., Shiba, T., Ito, K., Sekhar, P., Yanagida, M., Dos Santos, F. D., Milano, G., Furukawa, H., Chu, T-Y., Saito, T., Kakugo, A., Matsui, H., Tokito, S., Ito, H., Khosla, A., Fukushima, K., Yoshida, T., Bhansali, S., Kaltenbrunner, M., White, M., Nakai, A. & Masuhara, A. (版). 1 版 Electrochemical Society Inc., p. 89-97 9 p. (ECS Transactions; 巻数 88, 番号 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Particles (particulate matter)
Printing
Actuators
Gels
3D printers

CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry

Wakamatsu, K., Kurokawa, S., Toyama, T. & Hayashi, T., 11 1 2019, : : Precision Engineering. 60, p. 458-464 7 p.

研究成果: ジャーナルへの寄稿記事

Cerium compounds
Quartz
Glass
Substrates
Polishing

Effects of changes in gas type and partial pressure on chemical mechanical polishing property of Si substrate

Yin, T., Kitamura, K., Doi, T., Kurokawa, S., Zhou, Z. & Feng, K., 1 1 2019, : : ECS Journal of Solid State Science and Technology. 8, 4, p. P293-P297

研究成果: ジャーナルへの寄稿記事

Chemical mechanical polishing
Partial pressure
Gases
Polishing
Cytidine Monophosphate
Contact resistance
Wear of materials
Coatings
Acoustic impedance
Experiments
公開
Machinability
Forging
Automobiles
automobile
cutting (process)
公開
Powders
Sintering
2018

Developing a method of fabricating microchannels using plant root structure

Nakashima, S., Tokumaru, K. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HJ07.

研究成果: ジャーナルへの寄稿記事

plant roots
microchannels
Microchannels
blood vessels
Blood vessels

Development of energy-harvesting system using deformation of magnetic elastomer

Shinoda, H. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HJ05.

研究成果: ジャーナルへの寄稿記事

Energy harvesting
elastomers
Magnetic flux
Elastomers
magnetic flux

Fabrication of a fiber probe using a CO 2 laser for microstructure measurement: High functionality and durability test

Uchiyama, K., Murakami, H., Katsuki, A., Sajima, T., Yamamoto, T., Nagata, R. & Fujiyoshi, K., 1 1 2018, : : Procedia CIRP. 77, p. 513-516 4 p.

研究成果: ジャーナルへの寄稿Conference article

Durability
Fabrication
Microstructure
Fibers
Lasers
2 引用 (Scopus)
Gears
Machine vibrations
Vibrations (mechanical)
Gear teeth

Interfacial pattern changes of imprinted multilayered material in milli- and microscales

Yonekura, K., Tokumaru, K. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HG05.

研究成果: ジャーナルへの寄稿記事

microbalances
Nanoimprint lithography
lithography
micrometers
pressing
2 引用 (Scopus)

Polishing Characteristics of MnO 2 Polishing Slurry on the Si-face of SiC Wafer

Yin, T., Doi, T., Kurokawa, S., Zhou, Z. Z. & Feng, K. P., 12 1 2018, : : International Journal of Precision Engineering and Manufacturing. 19, 12, p. 1773-1780 8 p.

研究成果: ジャーナルへの寄稿記事

Polishing
Ions
Chemical mechanical polishing
Surface morphology
1 引用 (Scopus)

Room temperature impact deposition of ceramic by laser shock wave

Jinno, K. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HJ06.

研究成果: ジャーナルへの寄稿記事

Shock waves
shock waves
ceramics
Lasers
room temperature
1 引用 (Scopus)

Study of femtosecond laser ablation effect on micro-processing for 4H-SiC substrate

Wang, C., Kurokawa, S., Yuan, J., Fan, L., Lu, H., Wu, Z., Yao, W., Zhang, K., Zhang, Y. & Doi, T., 1 1 2018, : : International Journal of Automation Technology. 12, 2, p. 187-198 12 p.

研究成果: ジャーナルへの寄稿記事

Laser ablation
Ultrashort pulses
Scanning
Substrates
Processing
1 引用 (Scopus)

Study of the antifouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., 1 1 2018, : : Journal of Photopolymer Science and Technology. 31, 1, p. 121-128 8 p.

研究成果: ジャーナルへの寄稿記事

Biomimetics
Polymers
Medical applications
Fouling
Polymer films

Study of the anti-fouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., 1 1 2018, Biosensing and Nanomedicine XI. Agahi, M. H., Razeghi, M., Mohseni, H. & Agahi, M. H. (版). SPIE, 107280L. (Proceedings of SPIE - The International Society for Optical Engineering; 巻数 10728).

研究成果: 著書/レポートタイプへの貢献会議での発言

antifouling
biomimetics
Biomimetics
Fouling
snails
5 引用 (Scopus)

Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel

Harun, W. S. W., Asri, R. I. M., Romlay, F. R. M., Sharif, S., Jan, N. H. M. & Tsumori, F., 6 5 2018, : : Journal of Alloys and Compounds. 748, p. 1044-1052 9 p.

研究成果: ジャーナルへの寄稿記事

Stainless Steel
Oxides
Stainless steel
Corrosion
Oxidation

The effects of grain size and pore size on the high cycle fatigue behavior of injection molded Ti-6Al-4V compacts

Kudo, K., Shinagawa, K. & Miura, H., 1 1 2018, Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, p. 243-252 10 p. (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; 巻数 2018-June).

研究成果: 著書/レポートタイプへの貢献会議での発言

Grain size and shape
vanadium alloys
Vanadium alloys
Metal molding
metal powder
Semiconductor materials
Data storage equipment
4 引用 (Scopus)

Visco-elastic control of elastomer with magnetic particles by applied magnetic field

Maede, D., Tsumori, F., Osada, T. & Kudo, K., 1 1 2018, : : IEEJ Transactions on Sensors and Micromachines. 138, 2, p. 48-53 6 p.

研究成果: ジャーナルへの寄稿記事

Elastomers
Magnetic fields
Polydimethylsiloxane
Actuators
Damping
2017
Abrasives
Viscosity
Nanoparticles
Shear viscosity
Compensation and Redress

Capillary liquid bridge and grain coarsening during liquid phase sintering

Nikolić, Z. S. & Shinagawa, K., 1 1 2017, : : Science of Sintering. 49, 1, p. 1-10 10 p.

研究成果: ジャーナルへの寄稿記事

liquid phase sintering
liquid bridges
Liquid phase sintering
Coarsening
Liquids
8 引用 (Scopus)

Development of magnetic-field-driven artificial cilium array with magnetic orientation in each cilium

Marume, R., Tsumori, F., Kudo, K., Osada, T. & Shinagawa, K., 6 1 2017, : : Japanese Journal of Applied Physics. 56, 6, 06GN15.

研究成果: ジャーナルへの寄稿記事

laser machining
Machining
Magnetic fields
Ultraviolet lasers
systems analysis
5 引用 (Scopus)

Development of multilayer imprint process for solid oxide fuel cells

Tokumaru, K., Tsumori, F., Kudo, K., Osada, T. & Shinagawa, K., 6 1 2017, : : Japanese Journal of Applied Physics. 56, 6, 06GL04.

研究成果: ジャーナルへの寄稿記事

solid oxide fuel cells
Solid oxide fuel cells (SOFC)
Multilayers
Electrolytes
Powders

Dynamics of photo-excitation for the ablation of 4H-SiC substrate using femtosecond laser

Matsunaga, K., Hayashi, T., Kurokawa, S., Yokoo, H., Hasegawa, N., Nishikino, M. & Matsukawa, Y., 11 13 2017.

研究成果: 会議への寄与タイプ論文

Photoexcitation
Ablation
Ultrashort pulses
Substrates
Ultrafast lasers

Effect of plasma formation on the double pulse laser excitation of cubic silicon carbide

Otobe, T., Hayashi, T. & Nishikino, M., 10 23 2017, : : Applied Physics Letters. 111, 17, 171107.

研究成果: ジャーナルへの寄稿記事

silicon carbides
pulses
excitation
lasers
energy absorption
1 引用 (Scopus)

Fabrication of ultra-small-diameter optical-fiber probe using acid-etch technique and CO2 laser for 3D-micro metrology

Murakami, H., Katsuki, A., Sajima, T. & Uchiyama, K., 1 1 2017, : : International Journal of Automation Technology. 11, 5, p. 699-706 8 p.

研究成果: ジャーナルへの寄稿記事

Optical fibers
Adhesives
Fabrication
Curing
Acids
1 引用 (Scopus)

Feel of fishing reel

Inoue, T. & Kurokawa, S., 11 17 2017, Emotional Engineering: Understanding Motivation. Springer International Publishing, 巻 6. p. 93-118 26 p.

研究成果: 著書/レポートタイプへの貢献

Gears
CAD
functionality
art studies
recreational activity

Preface

Moriwaki, I., Fujii, M., Hirogaki, T., Iwatsuki, N., Koide, T., Kurokawa, S., Tanaka, E. & Tozaki, Y., 11 2017, : : Journal of Advanced Mechanical Design, Systems and Manufacturing. 11, 6, JAMDSM0067.

研究成果: ジャーナルへの寄稿編集

3 引用 (Scopus)
Gears
Simulators
Gear teeth
1 引用 (Scopus)

Surface morphology evolution induced by multiple femtosecond laser ablation on 4H-SiC substrate and its application to CMP

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Lv, B. & Zhang, K., 1 1 2017, : : ECS Journal of Solid State Science and Technology. 6, 12, p. P853-P861

研究成果: ジャーナルへの寄稿記事

Chemical mechanical polishing
Laser ablation
Ultrashort pulses
Silicon carbide
Surface morphology
9 引用 (Scopus)

The polishing effect of sic substrates in femtosecond laser irradiation assisted chemical mechanical polishing (CMP)

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Sano, Y., Aida, H., Zhang, K. & Deng, Q., 1 1 2017, : : ECS Journal of Solid State Science and Technology. 6, 4, p. P105-P112

研究成果: ジャーナルへの寄稿記事

Chemical mechanical polishing
Laser beam effects
Ultrashort pulses
Polishing
Substrates
2016
1 引用 (Scopus)
Superalloys
Mechanical properties
Lasers
Elongation
Fatigue of materials

Brownian diffusion analysis for nano-abrasives in CMP slurry by using fluorescence polarization method

Hayashi, T., Toshiki, S. & Kurokawa, S., 2 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411985. (2015 International Conference on Planarization/CMP Technology, ICPT 2015).

研究成果: 著書/レポートタイプへの貢献会議での発言

Cytidine Monophosphate
Abrasives
Fluorescence
Polarization
Particle size analysis
1 引用 (Scopus)

Control strategy of developed mechanical actuator in measuring hole surface parameter

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H. & Kurokawa, S., 5 1 2016, : : International Journal of Advanced Manufacturing Technology. 84, 5-8, p. 777-786 10 p.

研究成果: ジャーナルへの寄稿記事

Mechanical actuators
Actuators
Units of measurement
Optical systems
Interferometers

Control the deformation of MIM parts by the powder size distribution

Osada, T., Kudo, K., Hashikawa, R., Tsumori, F. & Miura, H., 1 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

研究成果: 著書/レポートタイプへの貢献会議での発言

Metal molding
Injection molding
Powders
2 引用 (Scopus)
Metal molding
Injection molding
Powders
Sintering
Coordinate measuring machines

Corrosion properties of the Fe-Cr-based soft magnetic alloys fabricated by metal injection molding

Hamataka, Y., Hatakeyama, M., Osada, T., Miura, H., Iwatsu, O., Tanaka, S. & Sunada, S., 1 1 2016, : : Materials Transactions. 57, 12, p. 2110-2115 6 p.

研究成果: ジャーナルへの寄稿記事

Metal molding
injection molding
Injection molding
corrosion
Corrosion
1 引用 (Scopus)

Corrosion properties of the Fe-Cr-based soft magnetic alloys fabricated by metal injection molding

Hamataka, Y., Hatakeyama, M., Osada, T., Miura, H., Iwatsu, O., Tanaka, S. & Sunada, S., 5 2016, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 63, 5, p. 291-297 7 p.

研究成果: ジャーナルへの寄稿記事

Metal molding
Injection molding
Corrosion
Corrosion resistance
Magnetic properties
Carbon fiber reinforced plastics
Composite materials
Winding machines
Filament winding
Laminating
6 引用 (Scopus)

Development of corrugated ceramic sheet for SOFC electrolyte by micro imprint process

Tsumori, F., Tokumaru, K., Kudo, K., Osada, T. & Miura, H., 1 1 2016, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 63, 7, p. 519-523 5 p.

研究成果: ジャーナルへの寄稿記事

Yttria stabilized zirconia
Solid oxide fuel cells (SOFC)
Electrolytes
Powders
Silicone Elastomers
4 引用 (Scopus)

Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure

Tsumori, F., Kawanishi, H., Kudo, K., Osada, T. & Miura, H., 6 2016, : : Japanese Journal of Applied Physics. 55, 6, 06GP18.

研究成果: ジャーナルへの寄稿記事

3D printers
Magnetic anisotropy
elastomers
Polydimethylsiloxane
Elastomers
2 引用 (Scopus)

Development of touch probing system using a fiber stylus

Murakami, H., Katsuki, A. & Sajima, T., 9 1 2016, : : Fibers. 4, 3, 24.

研究成果: ジャーナルへの寄稿記事

Ray tracing
Fibers
Optical systems
Optical fibers
7 引用 (Scopus)

Dynamics of spallation during femtosecond laser ablation studied by time-resolved reflectivity with double pump pulses

Kumada, T., Otobe, T., Nishikino, M., Hasegawa, N. & Hayashi, T., 1 4 2016, : : Applied Physics Letters. 108, 1, 011102.

研究成果: ジャーナルへの寄稿記事

spallation
laser ablation
pumps
reflectance
pulses

Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kudo, K., Ishimitsu, H., Choe, J., Osada, T., Miura, H. & Shinagawa, K., 1 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

研究成果: 著書/レポートタイプへの貢献会議での発言

Fatigue of materials
Metal molding
Injection molding
Powders
Boron