研究成果 1989 2020

フィルター
論文
2007
3 引用 (Scopus)

Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole

Katsuki, A., Onikura, H., Sajima, T., Park, H. K., Nakanishi, T., Ookubo, T., Murakami, H., Okada, N., Arita, M. & Mitsunaga, M., 12 1 2007.

研究成果: 会議への寄与タイプ論文

Lasers
Servomotors
CCD cameras
Detectors
2009

Development of a measuring system for micro hole accuracy using an optical fiber probe-evaluation of measurement repeatability

Murakami, H., Katsuki, A., Onikura, H., Sajima, T., Kawagoishi, N., Kondo, E. & Honda, T., 12 1 2009.

研究成果: 会議への寄与タイプ論文

Optical fibers
Surface roughness
Scanning

Effect of fullerene poly-hydroxide on Cu-CMP process

Kishida, H., Hayashi, T., Takaya, Y., Kokubo, K. & Suzuki, K., 12 1 2009.

研究成果: 会議への寄与タイプ論文

Fullerenes
Copper
Abrasives
Hydrogen peroxide
Molecules
2011

Effect of CFRP inter laminar shear strength by SPWC method

Miura, T., Tabuchi, D., Sajima, T., Doi, T. & Ohnishi, O., 12 1 2011.

研究成果: 会議への寄与タイプ論文

Carbon fiber reinforced plastics
Shear strength
Aluminum
Volume fraction
Temperature

In-process tool flank wear detection in intermittent cutting process by face milling

Murata, M., Kurokawa, S., Ohnishi, O., Uneda, M. & Doi, T., 12 1 2011.

研究成果: 会議への寄与タイプ論文

Milling (machining)
Wear of materials
Electromotive force
Electric currents
Contact resistance
2013

Development of nanoparticles sizing method based on fluorescence polarization

Ishizaki, Y., Hayashi, T., Michihata, M. & Takaya, Y., 1 1 2013, p. 319-322. 4 p.

研究成果: 会議への寄与タイプ論文

Diffusion in solids
Brownian movement
Dynamic light scattering
Quality control
Fluorescence
2015
Abrasives
Fluorescence
Viscosity
Polarization
Brownian movement
2 引用 (Scopus)

In-process tool wear detection of square end mill based on DC two terminal method

Gouarir, A., Kurokawa, S., Murata, M., Sajima, T. & Torii, T., 10 18 2015.

研究成果: 会議への寄与タイプ論文

Wear of materials
Contact resistance
Electromotive force
Acoustic impedance
Experiments

Monitoring of machining processes and error motions for a high-speed air turbine microspindle

Uchiyama, K., Murakami, H., Katsuki, A., Sajima, T. & Guangyu, Z., 1 1 2015.

研究成果: 会議への寄与タイプ論文

Compressed air motors
Machining
Torque
Monitoring
Bearings (structural)
2017

Dynamics of photo-excitation for the ablation of 4H-SiC substrate using femtosecond laser

Matsunaga, K., Hayashi, T., Kurokawa, S., Yokoo, H., Hasegawa, N., Nishikino, M. & Matsukawa, Y., 11 13 2017.

研究成果: 会議への寄与タイプ論文

Photoexcitation
Ablation
Ultrashort pulses
Substrates
Ultrafast lasers