研究成果 1989 2020

フィルター
記事
2019

Attempts on pico-precision machining via combination of ELID-grinding and polishing

Ohmori, H., Kim, Y., Uehara, Y., Kasuga, H., Ono-Kato, T., Lin, W., Kurokawa, S. & Umezu, S., 1 1 2019, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 304-309 6 p.

研究成果: ジャーナルへの寄稿記事

Polishing
Machining

Bio-mimic motion of 3D-printed gel structures dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., 1 1 2019, : : Journal of the Electrochemical Society. 166, 9, p. B3235-B3239

研究成果: ジャーナルへの寄稿記事

公開
Magnetic actuators
Printing presses
Magnetic anisotropy
Biomimetics
Particles (particulate matter)

CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry

Wakamatsu, K., Kurokawa, S., Toyama, T. & Hayashi, T., 11 1 2019, : : Precision Engineering. 60, p. 458-464 7 p.

研究成果: ジャーナルへの寄稿記事

Cerium compounds
Quartz
Glass
Substrates
Polishing

Effects of changes in gas type and partial pressure on chemical mechanical polishing property of Si substrate

Yin, T., Kitamura, K., Doi, T., Kurokawa, S., Zhou, Z. & Feng, K., 1 1 2019, : : ECS Journal of Solid State Science and Technology. 8, 4, p. P293-P297

研究成果: ジャーナルへの寄稿記事

Chemical mechanical polishing
Partial pressure
Gases
Polishing
Cytidine Monophosphate
Contact resistance
Wear of materials
Coatings
Acoustic impedance
Experiments
2018
2 引用 (Scopus)

3D printing system of magnetic anisotropy for artificial cilia

Azukizawa, S., Shinoda, H., Tokumaru, K. & Tsumori, F., 1 1 2018, : : Journal of Photopolymer Science and Technology. 31, 1, p. 139-144 6 p.

研究成果: ジャーナルへの寄稿記事

Magnetic anisotropy
Printing
Actuators
Elastomers
Mammals

Developing a method of fabricating microchannels using plant root structure

Nakashima, S., Tokumaru, K. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HJ07.

研究成果: ジャーナルへの寄稿記事

plant roots
microchannels
Microchannels
blood vessels
Blood vessels

Development of energy-harvesting system using deformation of magnetic elastomer

Shinoda, H. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HJ05.

研究成果: ジャーナルへの寄稿記事

Energy harvesting
elastomers
Magnetic flux
Elastomers
magnetic flux
2 引用 (Scopus)
Gears
Machine vibrations
Vibrations (mechanical)
Gear teeth

Interfacial pattern changes of imprinted multilayered material in milli- and microscales

Yonekura, K., Tokumaru, K. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HG05.

研究成果: ジャーナルへの寄稿記事

microbalances
Nanoimprint lithography
lithography
micrometers
pressing
2 引用 (Scopus)

Polishing Characteristics of MnO 2 Polishing Slurry on the Si-face of SiC Wafer

Yin, T., Doi, T., Kurokawa, S., Zhou, Z. Z. & Feng, K. P., 12 1 2018, : : International Journal of Precision Engineering and Manufacturing. 19, 12, p. 1773-1780 8 p.

研究成果: ジャーナルへの寄稿記事

Polishing
Ions
Chemical mechanical polishing
Surface morphology
1 引用 (Scopus)

Room temperature impact deposition of ceramic by laser shock wave

Jinno, K. & Tsumori, F., 6 1 2018, : : Japanese Journal of Applied Physics. 57, 6, 06HJ06.

研究成果: ジャーナルへの寄稿記事

Shock waves
shock waves
ceramics
Lasers
room temperature
1 引用 (Scopus)

Study of femtosecond laser ablation effect on micro-processing for 4H-SiC substrate

Wang, C., Kurokawa, S., Yuan, J., Fan, L., Lu, H., Wu, Z., Yao, W., Zhang, K., Zhang, Y. & Doi, T., 1 1 2018, : : International Journal of Automation Technology. 12, 2, p. 187-198 12 p.

研究成果: ジャーナルへの寄稿記事

Laser ablation
Ultrashort pulses
Scanning
Substrates
Processing
1 引用 (Scopus)

Study of the antifouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., 1 1 2018, : : Journal of Photopolymer Science and Technology. 31, 1, p. 121-128 8 p.

研究成果: ジャーナルへの寄稿記事

Biomimetics
Polymers
Medical applications
Fouling
Polymer films
3 引用 (Scopus)

Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel

Harun, W. S. W., Asri, R. I. M., Romlay, F. R. M., Sharif, S., Jan, N. H. M. & Tsumori, F., 6 5 2018, : : Journal of Alloys and Compounds. 748, p. 1044-1052 9 p.

研究成果: ジャーナルへの寄稿記事

Stainless Steel
Oxides
Stainless steel
Corrosion
Oxidation
4 引用 (Scopus)

Visco-elastic control of elastomer with magnetic particles by applied magnetic field

Maede, D., Tsumori, F., Osada, T. & Kudo, K., 1 1 2018, : : IEEJ Transactions on Sensors and Micromachines. 138, 2, p. 48-53 6 p.

研究成果: ジャーナルへの寄稿記事

Elastomers
Magnetic fields
Polydimethylsiloxane
Actuators
Damping
2017
Abrasives
Viscosity
Nanoparticles
Shear viscosity
Compensation and Redress

Capillary liquid bridge and grain coarsening during liquid phase sintering

Nikolić, Z. S. & Shinagawa, K., 1 1 2017, : : Science of Sintering. 49, 1, p. 1-10 10 p.

研究成果: ジャーナルへの寄稿記事

liquid phase sintering
liquid bridges
Liquid phase sintering
Coarsening
Liquids
8 引用 (Scopus)

Development of magnetic-field-driven artificial cilium array with magnetic orientation in each cilium

Marume, R., Tsumori, F., Kudo, K., Osada, T. & Shinagawa, K., 6 1 2017, : : Japanese Journal of Applied Physics. 56, 6, 06GN15.

研究成果: ジャーナルへの寄稿記事

laser machining
Machining
Magnetic fields
Ultraviolet lasers
systems analysis
5 引用 (Scopus)

Development of multilayer imprint process for solid oxide fuel cells

Tokumaru, K., Tsumori, F., Kudo, K., Osada, T. & Shinagawa, K., 6 1 2017, : : Japanese Journal of Applied Physics. 56, 6, 06GL04.

研究成果: ジャーナルへの寄稿記事

solid oxide fuel cells
Solid oxide fuel cells (SOFC)
Multilayers
Electrolytes
Powders

Effect of plasma formation on the double pulse laser excitation of cubic silicon carbide

Otobe, T., Hayashi, T. & Nishikino, M., 10 23 2017, : : Applied Physics Letters. 111, 17, 171107.

研究成果: ジャーナルへの寄稿記事

silicon carbides
pulses
excitation
lasers
energy absorption
1 引用 (Scopus)

Fabrication of ultra-small-diameter optical-fiber probe using acid-etch technique and CO2 laser for 3D-micro metrology

Murakami, H., Katsuki, A., Sajima, T. & Uchiyama, K., 1 1 2017, : : International Journal of Automation Technology. 11, 5, p. 699-706 8 p.

研究成果: ジャーナルへの寄稿記事

Optical fibers
Adhesives
Fabrication
Curing
Acids
Bearing pads
MEMS
Semiconductor materials
Industry
3 引用 (Scopus)
Gears
Simulators
Gear teeth
1 引用 (Scopus)

Surface morphology evolution induced by multiple femtosecond laser ablation on 4H-SiC substrate and its application to CMP

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Lv, B. & Zhang, K., 1 1 2017, : : ECS Journal of Solid State Science and Technology. 6, 12, p. P853-P861

研究成果: ジャーナルへの寄稿記事

Chemical mechanical polishing
Laser ablation
Ultrashort pulses
Silicon carbide
Surface morphology
8 引用 (Scopus)

The polishing effect of sic substrates in femtosecond laser irradiation assisted chemical mechanical polishing (CMP)

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Sano, Y., Aida, H., Zhang, K. & Deng, Q., 1 1 2017, : : ECS Journal of Solid State Science and Technology. 6, 4, p. P105-P112

研究成果: ジャーナルへの寄稿記事

Chemical mechanical polishing
Laser beam effects
Ultrashort pulses
Polishing
Substrates
2016
1 引用 (Scopus)
Superalloys
Mechanical properties
Lasers
Elongation
Fatigue of materials
1 引用 (Scopus)

Control strategy of developed mechanical actuator in measuring hole surface parameter

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H. & Kurokawa, S., 5 1 2016, : : International Journal of Advanced Manufacturing Technology. 84, 5-8, p. 777-786 10 p.

研究成果: ジャーナルへの寄稿記事

Mechanical actuators
Actuators
Units of measurement
Optical systems
Interferometers
2 引用 (Scopus)
Metal molding
Injection molding
Powders
Sintering
Coordinate measuring machines
1 引用 (Scopus)

Corrosion properties of the Fe-Cr-based soft magnetic alloys fabricated by metal injection molding

Hamataka, Y., Hatakeyama, M., Osada, T., Miura, H., Iwatsu, O., Tanaka, S. & Sunada, S., 5 1 2016, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 63, 5, p. 291-297 7 p.

研究成果: ジャーナルへの寄稿記事

Metal molding
Injection molding
Corrosion
Corrosion resistance
Magnetic properties

Corrosion properties of the Fe-Cr-based soft magnetic alloys fabricated by metal injection molding

Hamataka, Y., Hatakeyama, M., Osada, T., Miura, H., Iwatsu, O., Tanaka, S. & Sunada, S., 1 1 2016, : : Materials Transactions. 57, 12, p. 2110-2115 6 p.

研究成果: ジャーナルへの寄稿記事

Metal molding
injection molding
Injection molding
corrosion
Corrosion
Carbon fiber reinforced plastics
Composite materials
Winding machines
Filament winding
Laminating
6 引用 (Scopus)

Development of corrugated ceramic sheet for SOFC electrolyte by micro imprint process

Tsumori, F., Tokumaru, K., Kudo, K., Osada, T. & Miura, H., 1 1 2016, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 63, 7, p. 519-523 5 p.

研究成果: ジャーナルへの寄稿記事

Yttria stabilized zirconia
Solid oxide fuel cells (SOFC)
Electrolytes
Powders
Silicone Elastomers
4 引用 (Scopus)

Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure

Tsumori, F., Kawanishi, H., Kudo, K., Osada, T. & Miura, H., 6 1 2016, : : Japanese Journal of Applied Physics. 55, 6, 06GP18.

研究成果: ジャーナルへの寄稿記事

3D printers
Magnetic anisotropy
elastomers
Polydimethylsiloxane
Elastomers
2 引用 (Scopus)

Development of touch probing system using a fiber stylus

Murakami, H., Katsuki, A. & Sajima, T., 9 1 2016, : : Fibers. 4, 3, 24.

研究成果: ジャーナルへの寄稿記事

Ray tracing
Fibers
Optical systems
Optical fibers
7 引用 (Scopus)

Dynamics of spallation during femtosecond laser ablation studied by time-resolved reflectivity with double pump pulses

Kumada, T., Otobe, T., Nishikino, M., Hasegawa, N. & Hayashi, T., 1 4 2016, : : Applied Physics Letters. 108, 1, 011102.

研究成果: ジャーナルへの寄稿記事

spallation
laser ablation
pumps
reflectance
pulses
4 引用 (Scopus)
High temperature properties
Boron
Metal molding
Injection molding
Lamellar structures
1 引用 (Scopus)

Enhancing stability of Co gradient in nano-structured WC-Co functionally graded composites using graphene additives

Nasser, A., Shinagawa, K., El-Hofy, H. & Moneim, A. A., 12 1 2016, : : Journal of the Ceramic Society of Japan. 124, 12, p. 1191-1198 8 p.

研究成果: ジャーナルへの寄稿記事

Graphite
Graphene
graphene
gradients
composite materials
4 引用 (Scopus)
Metal molding
Injection molding
Intermetallics
Mechanical properties
Titanium

Improvement of mechanical properties of injection molded ni-base superalloy compacts

Kudo, K., Wai, S. K., Osada, T., Tsumori, F. & Miura, H., 1 1 2016, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 63, 7, p. 462-467 6 p.

研究成果: ジャーナルへの寄稿記事

Metal molding
Superalloys
Injection molding
Mechanical properties
Pore size
2 引用 (Scopus)

In-process toolwear detection of uncoated square end mill based on electrical contact resistance

Gouarir, A., Kurokawa, S., Sajima, T. & Murata, M., 9 1 2016, : : International Journal of Automation Technology. 10, 5, p. 767-772 6 p.

研究成果: ジャーナルへの寄稿記事

Contact resistance
Wear of materials
Acoustic impedance
Experiments
Gages
8 引用 (Scopus)

Metachronal wave of artificial cilia array actuated by applied magnetic field

Tsumori, F., Marume, R., Saijou, A., Kudo, K., Osada, T. & Miura, H., 6 1 2016, : : Japanese Journal of Applied Physics. 55, 6, 06GP19.

研究成果: ジャーナルへの寄稿記事

Magnetic fields
fluidics
Fluidics
elastomers
magnetic fields
10 引用 (Scopus)

Preparation and characterization of composite coatings containing a quaternary ammonium salt as an anti-static agent

Kugimoto, Y., Wakabayashi, A., Dobashi, T., Ohnishi, O., Doi, T. K. & Kurokawa, S., 3 1 2016, : : Progress in Organic Coatings. 92, p. 80-84 5 p.

研究成果: ジャーナルへの寄稿記事

Antistatic Agents
Antistatic agents
Composite coatings
Ammonium Compounds
Glycols
4 引用 (Scopus)

Reduction of liquid bridge force for 3D microstructure measurements

Murakami, H., Katsuki, A., Sajima, T. & Fukuda, M., 1 1 2016, : : Applied Sciences (Switzerland). 6, 5, 153.

研究成果: ジャーナルへの寄稿記事

liquid bridges
microstructure
Microstructure
Liquids
vessels
15 引用 (Scopus)

Sintering force behind the viscous sintering of two particles

Wakai, F., Katsura, K., Kanchika, S., Shinoda, Y., Akatsu, T. & Shinagawa, K., 5 1 2016, : : Acta Materialia. 109, p. 292-299 8 p.

研究成果: ジャーナルへの寄稿記事

Sintering
Coalescence
Tensors
Surface tension
Strain rate
4 引用 (Scopus)
Metal molding
Injection molding
Powders
Mechanical properties
Titanium alloys
4 引用 (Scopus)
Laser beam machining
Polymers
Heating
Chemical reactivity
Yttria stabilized zirconia
2015
2 引用 (Scopus)

Deformation control of large sized MIM parts by changing the powder size distribution

Osada, T., Sakurai, R., Hashikawa, R., Tsumori, F., Miura, H. & Toda, K., 3 1 2015, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 62, 3, p. 108-113 6 p.

研究成果: ジャーナルへの寄稿記事

Metal molding
Injection molding
Powders
Particle size
Viscosity
11 引用 (Scopus)

Development of actuation system for artificial cilia with magnetic elastomer

Tsumori, F., Saijou, A., Osada, T. & Miura, H., 1 1 2015, : : Japanese Journal of Applied Physics. 54, 6, 06FP12.

研究成果: ジャーナルへの寄稿記事

elastomers
strokes
actuation
Elastomers
Magnetic fields