研究成果 1982 2020

フィルター
論文
2017

4D hydrogen embrittlement behaviour in high strength aluminium alloy

Toda, H., Shimizu, K., Gao, H. & Hirayama, K., 1 1 2017, p. 728-729. 2 p.

研究成果: 会議への寄与タイプ論文

High strength alloys
Hydrogen embrittlement
Aluminum alloys
X rays
Hydrogen

Hydrogen induced strain localization in Al-Zn-Mg-Cu aluminum alloys

Su, H., Toda, H., Masunaga, R., Uesugi, K., Takeuchi, A. & Watanabe, Y., 1 1 2017, p. 710-711. 2 p.

研究成果: 会議への寄与タイプ論文

Aluminum alloys
Hydrogen
Hydrogen embrittlement
Crack tips
Tomography

Study on crack occurrence of titanium alloy in tensile test by advanced moiré technique

Wang, Q. H., Ri, S., Tanaka, Y., Naito, K., Koyama, M., Tsuzaki, K. & Ohkubo, M., 1 1 2017, p. 481-482. 2 p.

研究成果: 会議への寄与タイプ論文

Titanium alloys
Cracks
Shear strain
Crack initiation
Grain boundaries

Visualization of strain concentrations in composites using advanced image processing techniques

Wang, Q., Ri, S., Tanaka, Y. & Koyama, M., 1 1 2017.

研究成果: 会議への寄与タイプ論文

Image processing
Visualization
Composite materials
Cracks
Shear strain
2014
2 引用 (Scopus)

Study of creep damage in creep exposed martensitic high chromium steel weldments

Schlacher, C., Béal, C., Sommitsch, C., Toda, H. & Mayr, P., 1 1 2014, p. 914-923. 10 p.

研究成果: 会議への寄与タイプ論文

Strengthening (metal)
Chromium
Creep
Steel
Heat affected zone
2013
3 引用 (Scopus)

Ductility loss in Hydrogen-charged Ductile Cast Iron

Matsunaga, H., Usuda, T., Yanase, K. & Endo, M., 1 1 2013, p. 1372-1381. 10 p.

研究成果: 会議への寄与タイプ論文

ductility
Cast iron
Ductility
hydrogen
iron

Measurement of effective stress intensity factor range of mode II fatigue crack growth using hysteresis loop

Hamada, S. & Liu, M., 1 1 2013, p. 1717-1723. 7 p.

研究成果: 会議への寄与タイプ論文

Hysteresis loops
effective stress
Fatigue crack propagation
hysteresis
fatigue

Small crack effect on threshold stress intensity KTH for high strength steel with internal hydrogen

Murakami, Y., Matsunaga, H., Abyazi, A. & Fukushima, Y., 1 1 2013, p. 1309-1318. 10 p.

研究成果: 会議への寄与タイプ論文

High strength steel
defect
crack
steel
hydrogen
2010
Fatigue crack propagation
Crack tips
Hydrogen
Gases
Plastics
2009
2 引用 (Scopus)

A proposal of a method to analyze 3D deformation / fracture characteristics inside materials based on a stratified matching approach

Nakazawa, M., Kobayashi, M., Toda, H. & Aoki, Y., 12 1 2009, p. 1979-1984. 6 p.

研究成果: 会議への寄与タイプ論文

Impurities
Cracks
Air
2005

A study on managing cycle of measures for incident based on visualizing problems

Otsuka, Y. & Noguchi, H., 12 1 2005, p. 33-38. 6 p.

研究成果: 会議への寄与タイプ論文

Coherent-to-incoherent transition of intergranular bcc-precipitates by pre-/post-deformations in a ni-43Cr alloy

Adachi, Y. & Tsuzaki, K., 12 1 2005, p. 139-144. 6 p.

研究成果: 会議への寄与タイプ論文

Precipitates
Microstructural evolution
Electron diffraction

Crystallography and hydrogen trapping of alloy carbides in steel

Wei, F. G. & Tsuzaki, K., 12 1 2005, p. 235-246. 12 p.

研究成果: 会議への寄与タイプ論文

Crystallography
Carbides
Precipitates
Hydrogen
Steel
2002
5 引用 (Scopus)

Influence of RTA parameters on residual stress and stress gradient of multilayered LPCVD polysilicon film

Yoshikawa, E., Tsugai, M., Horikawa, M., Otani, H. & Hamada, S., 1 1 2002, p. 451-454. 4 p.

研究成果: 会議への寄与タイプ論文

Rapid thermal annealing
Polysilicon
Residual stresses
Nitrides
Spectroscopy