Pureに変更を加えた場合、すぐここに表示されます。

研究成果 1995 2019

  • 319 引用
  • 9 h指数
  • 16 記事
  • 10 会議での発言
  • 6 論文
1995
1 引用 (Scopus)

Collapse behaviour of stiffened plating under thrust. (1st report)

Yao, T., Yanagihara, D., Fujikubo, M. & Ohno, Y., 12 1 1995, : : Nihon Zosen Gakkai Ronbunshu/Journal of the Society of Naval Architects of Japan. 178, p. 451-462 12 p.

研究成果: ジャーナルへの寄稿記事

Plating
Buckling
Load limits
Rigidity
Plastics
1997
13 引用 (Scopus)

Buckling/plastic collapse behaviour and strength of stiffened plates under thrust

Yao, T., Fujikubo, M. & Yanagihara, D., 12 1 1997, : : International Journal of Offshore and Polar Engineering. 7, 4, p. 285-292 8 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Plastics
Rigidity
Geometry
2 引用 (Scopus)

Buckling/plastic collapse behaviour and strength of stiffened plates under thrust

Yao, T., Fujikubo, M. & Yanagihara, D., 1 1 1997, p. 353-360. 8 p.

研究成果: 会議への寄与タイプ論文

Buckling
Plastics
Rigidity
Geometry
Ions
2001
5 引用 (Scopus)

A New Type VLFS Using Submerged Plates: Sub-Plate VLFS - Part-3 Structural Response and Strength

Fujikubo, M., Yanagihara, D., Kitamura, M., Yamamoto, M., Iwashita, H., Takaki, M., Kanda, M., Ando, K. & Imai, Y., 12 1 2001, p. 93-100. 8 p.

研究成果: 会議への寄与タイプ論文

Breakwaters
Water
Finite element method
7 引用 (Scopus)

Post-ultimate strength behaviour of long rectangular plate subjected to uni-axial thrust

Yao, T., Fujikubo, M., Yanagihara, D. & Murase, T., 1 1 2001, Proceedings of the International Offshore and Polar Engineering Conference. 巻 4. p. 390-397 8 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Buckling
Load limits
Unloading
Roofs
Plastic deformation
2002
1 引用 (Scopus)

Buckling/Fracture Behaviour of GFRP Laminated plates with Initial Delamination

Yanagihara, D., Fujikubo, M. & Teraue, D., 12 1 2002, p. 162-169. 8 p.

研究成果: 会議への寄与タイプ論文

Delamination
Buckling
Finite element method
Polyester resins
Energy release rate

Buckling/Plastic Collapse Behaviour and Estimation of Ultimate Strength of Aluminium Stiffened Plate

Setta, K., Yanagihara, D. & Fujikubo, M., 12 1 2002, p. 636-643. 8 p.

研究成果: 会議への寄与タイプ論文

Buckling
Plastics
Aluminum
Heat affected zone
Strain hardening
10 引用 (Scopus)

ISUM Approach for Collapse Analysis of Double-Bottom Structures in Ships

Fujikubo, M., Olaru, V. D., Yanagihara, D. & Setoyama, Y., 12 1 2002, p. 644-651. 8 p.

研究成果: 会議への寄与タイプ論文

Ships
Plating
Systems analysis
Finite element method
3 引用 (Scopus)

Structural Response and Strength of A New Type VLFS Using Submerged Plates

Fujikubo, M., Takaki, M., Xiao, T. Y., Yanagihara, D., Kanda, M. & Imai, Y., 12 1 2002, p. 414-421. 8 p.

研究成果: 会議への寄与タイプ論文

Floating breakwaters
Pontoons
Fluids
2003

Collapse Tests on 1/10-Scale Hull Girder Model of Chip Carrier in Sagging

Yao, T., Fujikubo, M., Yanagihara, D. & Fujii, I., 12 1 2003, Proceedings of the International Offshore and Polar Engineering Conference. p. 2626-2633 8 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Plating
Buckling
Bending moments
Steel
4 引用 (Scopus)

ISUM approach for collapse analysis of double-bottom structures in ships

Fujikubo, M., Yanagihara, D., Setoyama, Y. & Olaru, D. V., 1 1 2003, : : International Journal of Offshore and Polar Engineering. 13, 3, p. 224-231 8 p.

研究成果: ジャーナルへの寄稿記事

Ships
Plating
Systems analysis
Finite element method
2005
51 引用 (Scopus)

Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 1: Continuous plate

Fujikubo, M., Yao, T., Khedmati, M. R., Harada, M. & Yanagihara, D., 7 1 2005, : : Marine Structures. 18, 5-6, p. 383-410 28 p.

研究成果: ジャーナルへの寄稿記事

Plating
Finite element method
Buckling
Ships
79 引用 (Scopus)

Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 2: Continuous stiffened panel

Fujikubo, M., Harada, M., Yao, T., Khedmati, M. R. & Yanagihara, D., 7 1 2005, : : Marine Structures. 18, 5-6, p. 411-427 17 p.

研究成果: ジャーナルへの寄稿記事

Plating
Failure modes
Buckling
Finite element method
2006
6 引用 (Scopus)

Residual strength evaluation of corroded steel members in marine environments

Yamane, M., Tanaka, K., Matsuda, B., Fujikubo, M., Yanagihara, D. & Iwao, N., 12 1 2006, Proceedings of The Sixteenth 2006 International Offshore and Polar Engineering Conference, ISOPE 2006. p. 43-50 8 p. (Proceedings of the International Offshore and Polar Engineering Conference).

研究成果: 著書/レポートタイプへの貢献会議での発言

Corrosion
Steel
Paint
Coatings
Compaction
2009
1 引用 (Scopus)
pitch (inclination)
blades
rubber
wind turbines
Rubber
2011

Buckling/collapse analysis of welded panel structures

Yanagihara, D., 9 1 2011, : : Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 80, 6, p. 6-9 4 p.

研究成果: ジャーナルへの寄稿記事

Buckling
wind turbines
pitch (inclination)
rubber
Wind turbines
Rubber
2012
1 引用 (Scopus)

Collapse behaviour and ultimate strength of stiffened panels with arbitrary number of stiffeners subjected to longitudinal thrust

Yasuoka, A., Tanaka, S., Yanagihara, D., Okazawa, S. & Yao, T., 9 17 2012, Proceedings of the 22nd (2012) International Offshore and Polar Engineering Conference. p. 807-814 8 p. (Proceedings of the International Offshore and Polar Engineering Conference).

研究成果: 著書/レポートタイプへの貢献会議での発言

Aspect ratio
Finite element method
2013

Buckling/fracture behavior of GFRP stiffened panel with top-hat stiffener under compression and prediction of initiation of delamination

Yanagihara, D., Fukuwa, K. & Fujikubo, M., 9 16 2013, Proceedings of the 23rd International Offshore and Polar Engineering Conference, ISOPE 2013. p. 678-685 8 p. (Proceedings of the International Offshore and Polar Engineering Conference).

研究成果: 著書/レポートタイプへの貢献会議での発言

Delamination
Buckling
Bending tests
Bending moments
Compressive stress
4 引用 (Scopus)

Elastic buckling and elasto-plastic collapse behaviors with torsion of a longitudinal stiffener under axial compression

Yanagihara, D. & Fujikubo, M., 3 6 2013, Analysis and Design of Marine Structures - Proceedings of the 4th International Conference on Marine Structures, MARSTRUCT 2013. p. 319-328 10 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Axial compression
Torsional stress
Buckling
Plastics
Finite element method
51 引用 (Scopus)

Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads

Xu, M. C., Yanagihara, D., Fujikubo, M. & Guedes Soares, C., 12 1 2013, : : Marine Structures. 34, p. 205-225 21 p.

研究成果: ジャーナルへの寄稿記事

Boundary conditions
Finite element method
Geometry
Direction compound
Uncertainty
2014
1 引用 (Scopus)

Bending and compressive strength of stiffened panels with crack damage in longitudinal stiffeners

Yanagihara, D., 1 1 2014, Proceedings of the 24th International Ocean and Polar Engineering Conference, ISOPE Busan. International Society of Offshore and Polar Engineers, p. 671-678 8 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Bending strength
Compressive strength
Cracks
Buckling
Finite element method
39 引用 (Scopus)

Evaluation of ultimate strength of stiffened panels under longitudinal thrust

Tanaka, S., Yanagihara, D., Yasuoka, A., Harada, M., Okazawa, S., Fujikubo, M. & Yao, T., 4 1 2014, : : Marine Structures. 36, p. 21-50 30 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Finite element method
Aspect ratio
Ships
Plastics
2016

Elastic buckling and ultimate strength of steel sandwich panels subjected to longitudinal or transverse compression

Yanagihara, D., 1 1 2016, Proceedings of the 26th International Ocean and Polar Engineering Conference, ISOPE 2016. Wang, A. M., Chung, J. S., Kokkinis, T. & Muskulus, M. (版). International Society of Offshore and Polar Engineers, p. 496-503 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; 巻数 2016-January).

研究成果: 著書/レポートタイプへの貢献会議での発言

Buckling
Steel
Finite element method
Plastics
2017
21 引用 (Scopus)

Buckling analysis of stiffened plate structures by an improved meshfree flat shell formulation

Sadamoto, S., Tanaka, S., Taniguchi, K., Ozdemir, M., Bui, T. Q., Murakami, C. & Yanagihara, D., 8 1 2017, : : Thin-Walled Structures. 117, p. 303-313 11 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Stiffness matrix
Flanges
Drilling
Boundary conditions
1 引用 (Scopus)

Finite element modeling and ultimate strength evaluation for cracked plates

Setoyama, Y., Tanaka, S., Yanagihara, D. & Murakami, C., 10 17 2017, : : Transactions of the Japan Society for Computational Engineering and Science. 2017, 20170014.

研究成果: ジャーナルへの寄稿記事

Buckling
Cracks
Crack closure
Axial compression
9 引用 (Scopus)

Meshfree flat-shell formulation for evaluating linear buckling loads and mode shapes of structural plates

Yoshida, K., Sadamoto, S., Setoyama, Y., Tanaka, S., Bui, T. Q., Murakami, C. & Yanagihara, D., 9 1 2017, : : Journal of Marine Science and Technology (Japan). 22, 3, p. 501-512 12 p.

研究成果: ジャーナルへの寄稿記事

buckling
Buckling
shell
Galerkin method
Value engineering
2018
9 引用 (Scopus)

A new method to estimate ultimate strength of stiffened panels under longitudinal thrust based on analytical formulas

Ozdemir, M., Ergin, A., Yanagihara, D., Tanaka, S. & Yao, T., 5 1 2018, : : Marine Structures. 59, p. 510-535 26 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Finite element method
Residual stresses
Welding

A simple design formula to estimate the ultimate strength of stiffened panels under bi-axial compression mainly in transverse direction

Komoriyama, Y. & Yanagihara, D., 1 1 2018, Structures, Safety, and Reliability. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; 巻数 3).

研究成果: 著書/レポートタイプへの貢献会議での発言

Axial compression
Buckling
Compaction
Availability
Finite element method

Residual ultimate strength of simply supported corroded plates with initial geometrical imperfections under uniaxial compression

Li, R., Yanagihara, D. & Yoshikawa, T., 1 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 332-339 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; 巻数 2018-June).

研究成果: 著書/レポートタイプへの貢献会議での発言

Ocean structures
Compaction
Corrosion
Defects
Steel
2019

Axial compressive residual ultimate strength of circular tube after lateral collision

Li, R., Yanagihara, D. & Yoshikawa, T., 1 1 2019, : : International Journal of Naval Architecture and Ocean Engineering. 11, 1, p. 396-408 13 p.

研究成果: ジャーナルへの寄稿記事

Axial compression
Load limits
Compressive stress
Application programming interfaces (API)
Plastic deformation

Buckling and collapse analysis of a cracked panel under a sequence of tensile to compressive load employing a shell-solid mixed finite element modeling

Tanaka, S., Sujiatanti, S. H., Setoyama, Y., Yu, J., Yanagihara, D. & Pei, Z., 10 1 2019, : : Engineering Failure Analysis. 104, p. 987-1001 15 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Cracks
Steel
Crack tips
Aspect ratio