Pureに変更を加えた場合、すぐここに表示されます。

研究成果 1995 2019

  • 319 引用
  • 9 h指数
  • 16 記事
  • 10 会議での発言
  • 6 論文
フィルター
記事
2019

Axial compressive residual ultimate strength of circular tube after lateral collision

Li, R., Yanagihara, D. & Yoshikawa, T., 1 1 2019, : : International Journal of Naval Architecture and Ocean Engineering. 11, 1, p. 396-408 13 p.

研究成果: ジャーナルへの寄稿記事

Axial compression
Load limits
Compressive stress
Application programming interfaces (API)
Plastic deformation

Buckling and collapse analysis of a cracked panel under a sequence of tensile to compressive load employing a shell-solid mixed finite element modeling

Tanaka, S., Sujiatanti, S. H., Setoyama, Y., Yu, J., Yanagihara, D. & Pei, Z., 10 1 2019, : : Engineering Failure Analysis. 104, p. 987-1001 15 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Cracks
Steel
Crack tips
Aspect ratio
2018
9 引用 (Scopus)

A new method to estimate ultimate strength of stiffened panels under longitudinal thrust based on analytical formulas

Ozdemir, M., Ergin, A., Yanagihara, D., Tanaka, S. & Yao, T., 5 1 2018, : : Marine Structures. 59, p. 510-535 26 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Finite element method
Residual stresses
Welding
2017
21 引用 (Scopus)

Buckling analysis of stiffened plate structures by an improved meshfree flat shell formulation

Sadamoto, S., Tanaka, S., Taniguchi, K., Ozdemir, M., Bui, T. Q., Murakami, C. & Yanagihara, D., 8 1 2017, : : Thin-Walled Structures. 117, p. 303-313 11 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Stiffness matrix
Flanges
Drilling
Boundary conditions
1 引用 (Scopus)

Finite element modeling and ultimate strength evaluation for cracked plates

Setoyama, Y., Tanaka, S., Yanagihara, D. & Murakami, C., 10 17 2017, : : Transactions of the Japan Society for Computational Engineering and Science. 2017, 20170014.

研究成果: ジャーナルへの寄稿記事

Buckling
Cracks
Crack closure
Axial compression
9 引用 (Scopus)

Meshfree flat-shell formulation for evaluating linear buckling loads and mode shapes of structural plates

Yoshida, K., Sadamoto, S., Setoyama, Y., Tanaka, S., Bui, T. Q., Murakami, C. & Yanagihara, D., 9 1 2017, : : Journal of Marine Science and Technology (Japan). 22, 3, p. 501-512 12 p.

研究成果: ジャーナルへの寄稿記事

buckling
Buckling
shell
Galerkin method
Value engineering
2014
39 引用 (Scopus)

Evaluation of ultimate strength of stiffened panels under longitudinal thrust

Tanaka, S., Yanagihara, D., Yasuoka, A., Harada, M., Okazawa, S., Fujikubo, M. & Yao, T., 4 1 2014, : : Marine Structures. 36, p. 21-50 30 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Finite element method
Aspect ratio
Ships
Plastics
2013
51 引用 (Scopus)

Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads

Xu, M. C., Yanagihara, D., Fujikubo, M. & Guedes Soares, C., 12 1 2013, : : Marine Structures. 34, p. 205-225 21 p.

研究成果: ジャーナルへの寄稿記事

Boundary conditions
Finite element method
Geometry
Direction compound
Uncertainty
2011

Buckling/collapse analysis of welded panel structures

Yanagihara, D., 9 1 2011, : : Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 80, 6, p. 6-9 4 p.

研究成果: ジャーナルへの寄稿記事

Buckling
wind turbines
pitch (inclination)
rubber
Wind turbines
Rubber
2009
1 引用 (Scopus)
pitch (inclination)
blades
rubber
wind turbines
Rubber
2005
51 引用 (Scopus)

Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 1: Continuous plate

Fujikubo, M., Yao, T., Khedmati, M. R., Harada, M. & Yanagihara, D., 7 1 2005, : : Marine Structures. 18, 5-6, p. 383-410 28 p.

研究成果: ジャーナルへの寄稿記事

Plating
Finite element method
Buckling
Ships
79 引用 (Scopus)

Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 2: Continuous stiffened panel

Fujikubo, M., Harada, M., Yao, T., Khedmati, M. R. & Yanagihara, D., 7 1 2005, : : Marine Structures. 18, 5-6, p. 411-427 17 p.

研究成果: ジャーナルへの寄稿記事

Plating
Failure modes
Buckling
Finite element method
2003
4 引用 (Scopus)

ISUM approach for collapse analysis of double-bottom structures in ships

Fujikubo, M., Yanagihara, D., Setoyama, Y. & Olaru, D. V., 1 1 2003, : : International Journal of Offshore and Polar Engineering. 13, 3, p. 224-231 8 p.

研究成果: ジャーナルへの寄稿記事

Ships
Plating
Systems analysis
Finite element method
1997
13 引用 (Scopus)

Buckling/plastic collapse behaviour and strength of stiffened plates under thrust

Yao, T., Fujikubo, M. & Yanagihara, D., 12 1 1997, : : International Journal of Offshore and Polar Engineering. 7, 4, p. 285-292 8 p.

研究成果: ジャーナルへの寄稿記事

Buckling
Plastics
Rigidity
Geometry
1995
1 引用 (Scopus)

Collapse behaviour of stiffened plating under thrust. (1st report)

Yao, T., Yanagihara, D., Fujikubo, M. & Ohno, Y., 12 1 1995, : : Nihon Zosen Gakkai Ronbunshu/Journal of the Society of Naval Architects of Japan. 178, p. 451-462 12 p.

研究成果: ジャーナルへの寄稿記事

Plating
Buckling
Load limits
Rigidity
Plastics