• 1564 引用
  • 20 h指数
1985 …2020

Research output per year

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

Conference article

Change in the microstructure and mechanical properties of drawn pearlitic steel with low-temperature aging

Hirakami, D., Ushioda, K., Manabe, T., Noguchi, K., Takai, K., Hata, Y., Hata, S. & Nakashima, H., 8 1 2017, : : IOP Conference Series: Materials Science and Engineering. 219, 1, 012026.

研究成果: ジャーナルへの寄稿Conference article

1 引用 (Scopus)

Deformation behavior and internal stress of icosahedral Al-Pd-Mn with decagonal phase lamellae at elevated temperatures

Hirai, H., Tomita, T., Yoshida, F. & Nakashima, H., 1 1 1999, : : Materials Research Society Symposium - Proceedings. 553, p. 331-336 6 p.

研究成果: ジャーナルへの寄稿Conference article

1 引用 (Scopus)

Formation of Bi,Pb-2223 and microstructural evolution in Pb-Ca-Cu deposited Bi-2212(001) single crystal by heat treatment

Kajihara, T., Shimada, Y., Hata, S., Ikeda, K., Nakashima, H., Matsumoto, A., Mochiku, T., Kitaguchi, H. & Doi, T., 1 1 2013, : : Physics Procedia. 45, p. 69-72 4 p.

研究成果: ジャーナルへの寄稿Conference article

2 引用 (Scopus)

Grain boundary migration of 〈110〉 tilt ∑11 and ∑21 boundaries in pure aluminum

Yoshida, F., Uehara, M., Ikeda, K. I., Nakashima, H. & Abe, H., 12 1 2004, : : Materials Science Forum. 467-470, II, p. 835-840 6 p.

研究成果: ジャーナルへの寄稿Conference article

2 引用 (Scopus)

Grain boundary structure and its energy of 〈110〉 symmetric tilt boundary in copper

Takata, N., Ikeda, K., Yoshida, F., Nakashima, H. & Abe, H., 12 1 2004, : : Materials Science Forum. 467-470, II, p. 807-812 6 p.

研究成果: ジャーナルへの寄稿Conference article

4 引用 (Scopus)

Influence of pertial annealing temperature on cube texture in high purity aluminum foils

Ikeda, K., Takata, N., Yoshida, F., Nakashima, H. & Abe, H., 12 2 2002, : : Materials Science Forum. 396-402, 1, p. 569-574 6 p.

研究成果: ジャーナルへの寄稿Conference article

4 引用 (Scopus)
コメント/討論

Ultramicrotomy of wire-bonded interfaces for TEM observation

Itoh, Y., Haji, H., Nakashima, H. & Kishida, H., 6 1 1995, : : Journal of Electron Microscopy. 44, 3, p. 151-153 3 p.

研究成果: ジャーナルへの寄稿コメント/討論

2 引用 (Scopus)
会議での発言

A new deformation region and how low do you go? - "intrinsic deformation limit"

Shen, J., Ikeda, K., Hata, S. & Nakashima, H., 3 25 2013, High Performance Structure Materials. p. 559-563 5 p. (Materials Science Forum; 巻数 747-748).

研究成果: 著書/レポートタイプへの貢献会議での発言

Annealing behavior and recrystallized texture in ARB processed copper

Takata, N., Yamada, K., Ikeda, K. I., Yoshida, F., Nakashima, H. & Tsuji, N., 12 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 919-924 6 p. (Materials Science Forum; 巻数 503-504).

研究成果: 著書/レポートタイプへの貢献会議での発言

19 引用 (Scopus)

Effect of vanadium and niobium on creep strength in 10% chromium R steel analyzed by STEM-EDS

Mitsuhara, M., Yoshida, Y., Ikeda, K. I., Nakashima, H. & Wakai, T., 5 19 2008, 2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8. p. 51-55 5 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Effects of addition of V and NB on Ω in high CR ferritic steels

Mitsuhara, M., Yoshida, Y., Ikeda, K. I., Nakashima, H. & Wakai, T., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 1 版 巻 561-565. p. 95-98 4 p. (Materials Science Forum; 巻数 561-565, 番号 PART 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Electron microscopy analysis of crack propagation behavior of alumina

Matsuo, H., Mitsuhara, M., Ikeda, K., Hata, S. & Nakashima, H., 12 1 2008, Materials Science and Technology Conference and Exhibition MS and T'08. p. 753-761 9 p. (Materials Science and Technology Conference and Exhibition, MS and T'08; 巻数 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

Evaluation of creep deformation mechanism of heat resistant steel by stress change test

Hayakawa, H., Nakashima, S., Kusumoto, J., Terada, D., Yoshida, F. & Nakashima, H., 5 19 2008, 2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8. p. 533-542 10 p. (2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8).

研究成果: 著書/レポートタイプへの貢献会議での発言

Grain boundary structure in ARB processed copper

Ikeda, K. I., Takata, N., Yamada, K., Yoshida, F., Nakashima, H. & Tsuji, N., 12 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 925-930 6 p. (Materials Science Forum; 巻数 503-504).

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)

Grain boundary structures of ARB processed aluminum

Ii, S., Hishida, M., Takata, N., Ikeda, K. I., Nakashima, H. & Tsuji, N., 1 1 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications Ltd, p. 716-721 6 p. (Materials Science Forum; 巻数 584-586 PART 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

3 引用 (Scopus)

In-situ EBSP analysis of grain boundary migration during recrystallization in pure aluminum foils

Takata, N., Ikeda, K. I., Nakashima, H. & Tsuji, N., 12 1 2007, Recrystallization and Grain Growth III - Proceedings of the Third International Conference on Recrystallization and Grain Growth, ReX and GG III. PART 1 版 p. 351-356 6 p. (Materials Science Forum; 巻数 558-559, 番号 PART 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

7 引用 (Scopus)

Photoluminescence evaluation of defects generated during temperature ramp-up process of SiGe-on-insulator virtual substrate fabrication

Wang, D., Ii, S., Ikeda, K. I., Nakashima, H. & Nakashima, H., 8 2 2007, ICSICT-2006: 2006 8th International Conference on Solid-State and Integrated Circuit Technology, Proceedings. p. 2193-2195 3 p. 4098665

研究成果: 著書/レポートタイプへの貢献会議での発言

Relation between ridging and texture components in Al-Mg-Si alloy

Ikeda, K. I., Yoshihara, T., Takata, N. & Nakashima, H., 12 1 2007, Recrystallization and Grain Growth III - Proceedings of the Third International Conference on Recrystallization and Grain Growth, ReX and GG III. PART 1 版 p. 71-76 6 p. (Materials Science Forum; 巻数 558-559, 番号 PART 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

7 引用 (Scopus)

Room temperature creep and substructure formation in pure aluminum at ultra-low strain rates

Shen, J. J., Ikeda, K., Hata, S. & Nakashima, H., 7 27 2011, TMS 2011 - 140th Annual Meeting and Exhibition, Supplemental Proceedings. p. 585-592 8 p. (TMS Annual Meeting; 巻数 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

Stress-induced phase transformation in the vicinity of Vickers indentations in 10mol% CeO2 doped tetragonal ZrO2 polycrystal

Matsuo, H., Ikeda, K., Hata, S. & Nakashima, H., 2009, Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08. p. 167-172 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Weight saving in small engine and vehicle component by utilization of die cast creep resistant alloys

Omura, H., Yonemaru, T., Asada, J. & Nakashima, H., 12 1 2009, SAE Technical Papers.

研究成果: 著書/レポートタイプへの貢献会議での発言

記事

32.Threshold Stress for High-Temperature Deformation of Dispersion-Strengthened Alloys

Nakashima, H., Yoshida, F., Yoshinaga, H. & Noguchi, K., 1 1 1993, : : Proceedings of the Japan Academy, Series B. 69, 7, p. 167-172 6 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)
13 引用 (Scopus)

Ab-initio study of long-period superstructures and anti-phase boundaries in Al-rich γ-TiAl (L10)-based alloys

Ghosh, P. S., Arya, A., Kulkarni, U. D., Dey, G. K., Hata, S., Nakano, T., Hagihara, K. & Nakashima, H., 4 13 2014, : : Philosophical Magazine. 94, 11, p. 1202-1218 17 p.

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

Abnormal grain growth of off-cube grains in high purity aluminum foils with cube texture

Takata, N., Yoshida, F., Ikeda, K. I., Nakashima, H. & Abe, H., 12 1 2005, : : Materials Transactions. 46, 12, p. 2975-2980 6 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Absence of Threshold Stress for High-Temperature Creep of Dispersion- and Solution-Hardened Al-3.1 at% Mg-1.3 vol% be Alloy

Yeh, Y. H., Miyachi, M., Miyachi, M., Nakashima, H., Yoshinaga, H., Kurishita, H., Goto, S., Goto, S. & Goto, S., 1 1 1990, : : Materials Transactions, JIM. 31, 9, p. 778-785 8 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Activated slip systems in β-silicon nitride during high temperature deformation

Kawahara, K., Tsurekawa, S. & Nakashima, H., 1 1 1996, : : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 60, 6, p. 582-588 7 p.

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

Al-Pd-Mn icosahedral quasicrystal prepared by floating zone melting technique

Hirai, H., Tsurekawa, S., Yoshida, F. & Nakashima, H., 1 1 1996, : : Materials Transactions, JIM. 37, 3, p. 448-453 6 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Analysis of cube texture in high purity aluminum foils for electrolytic capacitor by EBSP method

Ikeda, K. I., Tsumagari, K. I., Yoshida, F., Nakashima, H. & Abe, H., 2 2001, : : Keikinzoku/Journal of Japan Institute of Light Metals. 51, 2, p. 119-124 6 p.

研究成果: ジャーナルへの寄稿記事

13 引用 (Scopus)

Analysis of kink boundaries in deformed synchronized long-period stacking ordered magnesium alloys

Gao, H., Ikeda, K. I., Morikawa, T., Higashida, K. & Nakashima, H., 5 1 2015, : : Materials Letters. 146, p. 30-33 4 p.

研究成果: ジャーナルへの寄稿記事

28 引用 (Scopus)
3 引用 (Scopus)

Application of the CSL model to deformation twin boundary in B2 Type TiNi compound

Nishida, M., Matsuda, M., Morizono, Y., Fujimoto, T. & Nakashima, H., 2005, : : Unknown Journal. 842, p. 371-376 6 p., S5.2.

研究成果: ジャーナルへの寄稿記事

Atomic and electronic structure of 〈110〉 symmetric tilt boundaries in palladium

Takata, N., Mizuguchi, T., Ikeda, K. I. & Nakashima, H., 1 1 2004, : : Materials Transactions. 45, 7, p. 2099-2105 7 p.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)

Atomic periodicity of 〈001〉 symmetric tilt boundary in molybdenum

Morita, K. & Nakashima, H., 8 30 1997, : : Materials Science and Engineering A. 234-236, p. 1053-1056 4 p.

研究成果: ジャーナルへの寄稿記事

22 引用 (Scopus)

Atomic structure and electronic state of 〈110〉 symmetric tilt boundaries in palladium

Mizuguchi, T., Takata, N., Ikeda, K. I. & Nakashima, H., 11 1 2005, : : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 69, 11, p. 1010-1015 6 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Bondability of gold wire to gold-plated electrodes

Haji, H., Morita, T., Arita, K., Nakashima, H. & Yoshinaga, H., 1 1 1993, : : Materials Transactions, JIM. 34, 10, p. 960-965 6 p.

研究成果: ジャーナルへの寄稿記事

10 引用 (Scopus)

Change in electrical resistivity of commercial purity aluminium severely plastic deformed

Miyajima, Y., Komatsu, S. Y., Mitsuhara, M., Hata, S., Nakashima, H. & Tsuji, N., 11 1 2010, : : Philosophical Magazine. 90, 34, p. 4475-4488 14 p.

研究成果: ジャーナルへの寄稿記事

42 引用 (Scopus)

Change in microstructure and texture during annealing of pure copper heavily deformed by accumulative roll bonding

Takata, N., Yamada, K., Ikeda, K. I., Yoshida, F., Nakashima, H. & Tsuji, N., 8 1 2007, : : Materials Transactions. 48, 8, p. 2043-2048 6 p.

研究成果: ジャーナルへの寄稿記事

34 引用 (Scopus)

Characteristics of off-cube grains in high purity aluminum foil sheets with cube texture

Takata, N., Yoshida, F., Ikeda, K. I., Nakashima, H. & Abe, H., 12 2004, : : Keikinzoku/Journal of Japan Institute of Light Metals. 54, 12, p. 573-578 6 p.

研究成果: ジャーナルへの寄稿記事

Characterization of creep deformation behavior of 2.25Cr-IMo steel by stress change test

Hayakawa, H., Terada, D., Yoshida, F., Nakashima, H., Kanaya, A. & Nakashima, S., 6 1 2007, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 93, 6, p. 466-471 6 p.

研究成果: ジャーナルへの寄稿記事

Characterization of creep deformation mechanism and evaluation of dislocation mobility of modified 9Cr-1Mo steel by stress change test

Hayakawa, H., Terada, D., Yoshida, F., Nakashima, H. & Gotou, Y., 1 1 2003, : : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 67, 1, p. 22-26 5 p.

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

Characterization of high temperature creep properties in recrystallized 12cr-ods ferritic steel claddings

Ukai, S., Okuda, T., Fujiwara, M., Kobayashi, T., Mizuta, S. & Nakashima, H., 8 2002, : : journal of nuclear science and technology. 39, 8, p. 872-879 8 p.

研究成果: ジャーナルへの寄稿記事

153 引用 (Scopus)

Characterization of thick plasma spray tungsten coating on ferritic/martensitic steel F82H for high heat flux armor

Yahiro, Y., Mitsuhara, M., Tokunakga, K., Yoshida, N., Hirai, T., Ezato, K., Suzuki, S., Akiba, M. & Nakashima, H., 4 30 2009, : : Journal of Nuclear Materials. 386-388, C, p. 784-788 5 p.

研究成果: ジャーナルへの寄稿記事

53 引用 (Scopus)

Combined effect of solution and dispersion hardenings at high temperature

Nakashima, H., Iwasaki, K., Goto, S. & Yoshinaga, H., 1 1 1990, : : Transactions of the Japan Institute of Metals. 30, 1, p. 35-45 11 p.

研究成果: ジャーナルへの寄稿記事

6 引用 (Scopus)

COMBINED EFFECT OF SOLUTION AND DISPERSION HARDENINGS AT HIGH TEMPERATURE.

Nakashima, H., Iwasaki, K., Goto, S. & Yoshinaga, H., 2 1 1988, : : Nippon Kinzoku Gakkai-si. 52, 2, p. 180-188 9 p.

研究成果: ジャーナルへの寄稿記事

14 引用 (Scopus)

Correlation of grain boundary energy with boundary dislocation density

Morita, K., Tsurekawa, S., Nakashima, H. & Yoshinaga, H., 12 1 1996, : : Materials Science Forum. 204-206, PART 1, p. 239-244 6 p.

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

Crack propagation characteristics and fracture surface energy of boride cermets

Kitahara, H., Yoshikawa, Y., Yoshida, F., Nakashima, H., Hamashima, K., Shinozaki, Y. & Abe, H., 11 2002, : : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 66, 11, p. 1116-1121 6 p.

研究成果: ジャーナルへの寄稿記事