• 437 引用
  • 12 h指数
1989 …2020

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

  • 437 引用
  • 12 h指数
  • 48 Article
  • 11 Conference contribution
  • 4 Conference article
  • 2 Comment/debate
2020

Development of printing system for magnetically anisotropic actuator

Azukizawa, S., Tsumori, F., Shinoda, H., Tokumaru, K., Kudo, K. & Shinagawa, K., 1 1 2020, 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017. Chemical and Biological Microsystems Society, p. 623-624 2 p. (21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

1 引用 (Scopus)
2018
1 引用 (Scopus)

The effects of grain size and pore size on the high cycle fatigue behavior of injection molded Ti-6Al-4V compacts

Kudo, K., Shinagawa, K. & Miura, H., 1 1 2018, Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, p. 243-252 10 p. (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; 巻数 2018-June).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

1 引用 (Scopus)
2017

Capillary liquid bridge and grain coarsening during liquid phase sintering

Nikolić, Z. S. & Shinagawa, K., 1 1 2017, : : Science of Sintering. 49, 1, p. 1-10 10 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
15 引用 (Scopus)

Development of multilayer imprint process for solid oxide fuel cells

Tokumaru, K., Tsumori, F., Kudo, K., Osada, T. & Shinagawa, K., 6 2017, : : Japanese journal of applied physics. 56, 6, 06GL04.

研究成果: Contribution to journalArticle

9 引用 (Scopus)
2016

Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kudo, K., Ishimitsu, H., Choe, J., Osada, T., Miura, H. & Shinagawa, K., 1 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA), (World PM 2016 Congress and Exhibition).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

Enhancing stability of Co gradient in nano-structured WC-Co functionally graded composites using graphene additives

Nasser, A., Shinagawa, K., El-Hofy, H. & Moneim, A. A., 12 2016, : : Journal of the Ceramic Society of Japan. 124, 12, p. 1191-1198 8 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
1 引用 (Scopus)

Sintering force behind the viscous sintering of two particles

Wakai, F., Katsura, K., Kanchika, S., Shinoda, Y., Akatsu, T. & Shinagawa, K., 5 1 2016, : : Acta Materialia. 109, p. 292-299 8 p.

研究成果: Contribution to journalArticle

19 引用 (Scopus)
2014

Fabrication of [100]-oriented bismuth sodium titanate ceramics with small grain size and high density for piezoelectric materials

Hu, D., Mori, K., Kong, X., Shinagawa, K., Wada, S. & Feng, Q., 5 1 2014, : : Journal of the European Ceramic Society. 34, 5, p. 1169-1180 12 p.

研究成果: Contribution to journalArticle

26 引用 (Scopus)

Grain growth in polycrystalline nickel powder compacts during early stage of sintering

Shinagawa, K., Morioka, A., Mizuguchi, T., Tanaka, Y., Okubo, K., Iwatsu, O. & Tanaka, S., 10 1 2014, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 61, 10, p. 473-480 8 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)

Phase-field simulation of platelike grain growth during sintering of alumina

Shinagawa, K., Maki, S. & Yokota, K., 1 1 2014, : : Journal of the European Ceramic Society. 34, 12, p. 3027-3036 10 p.

研究成果: Contribution to journalArticle

13 引用 (Scopus)

Simulation of grain growth and sintering process by combined phase-field/discrete-element method

Shinagawa, K., 3 1 2014, : : Acta Materialia. 66, p. 360-369 10 p.

研究成果: Contribution to journalArticle

26 引用 (Scopus)
2013

A mathematical approach to Ostwald ripening due to diffusion and deformation in liquid bridge

Randjelovic, B., Shinagawa, K. & Nikolic, Z. S., 2013, : : Science of Sintering. 45, 3, p. 261-271 11 p.

研究成果: Contribution to journalArticle

3 引用 (Scopus)

Crystallographic orientation dependence of ε martensite transformation during tensile deformation of polycrystalline 30% Mn austenitic steel

Ueji, R., Takagi, Y., Tsuchida, N., Shinagawa, K., Tanaka, Y. & Mizuguchi, T., 8 1 2013, : : Materials Science and Engineering A. 576, p. 14-20 7 p.

研究成果: Contribution to journalArticle

24 引用 (Scopus)

Ferroelectric mesocrystals of bismuth sodium titanate: Formation mechanism, nanostructure, and application to piezoelectric materials

Hu, D., Kong, X., Mori, K., Tanaka, Y., Shinagawa, K. & Feng, Q., 9 16 2013, : : Inorganic chemistry. 52, 18, p. 10542-10551 10 p.

研究成果: Contribution to journalArticle

24 引用 (Scopus)
2012

A three-dimensional computer study of gravity induced skeletal structure evolution during liquid phase sintering

Nikolic, Z. S. & Shinagawa, K., 3 1 2012, : : Mathematical and Computer Modelling. 55, 5-6, p. 1825-1832 8 p.

研究成果: Contribution to journalArticle

4 引用 (Scopus)

Fracture behavior transition by change of strain rate in dislocation-induced Si steels

Mizuguchi, T., Ueji, R., Miyagawa, H., Tanaka, Y. & Shinagawa, K., 1 30 2012, THERMEC 2011. p. 2187-2192 6 p. (Materials Science Forum; 巻数 706-709).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

2 引用 (Scopus)

Grain size effect on high-speed deformation of Hadfield steel

Ueji, R., Kondo, D., Takagi, Y., Mizuguchi, T., Tanaka, Y. & Shinagawa, K., 11 1 2012, : : Journal of Materials Science. 47, 22, p. 7946-7953 8 p.

研究成果: Contribution to journalArticle

12 引用 (Scopus)

Suppression of sintering defects in metal/ceramic graded layers by using inhomogeneous powder mixtures

Shinagawa, K. & Sakane, Y., 1 1 2012, Advances in Sintering Science and Technology II - A Collection of Papers Presented at the International Conference on Sintering 2011. American Ceramic Society, p. 79-89 11 p. (Ceramic Transactions; 巻数 232).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

2011

Preparation of crystal-axis-oriented barium calcium titanate plate-like particles and its application to oriented ceramic

Kong, X., Ishikawa, Y., Shinagawa, K. & Feng, Q., 11 1 2011, : : Journal of the American Ceramic Society. 94, 11, p. 3716-3721 6 p.

研究成果: Contribution to journalArticle

24 引用 (Scopus)

Three-dimensional computer simulation of time-dependent skeletal structure evolution during liquid phase sintering

Nikolic, Z. S., Ristic, M. M. & Shinagawa, K., 8 31 2011, : : IOP Conference Series: Materials Science and Engineering. 18, SYMPOSIUM 1, 022003.

研究成果: Contribution to journalConference article

2010

Effect of Si content on fracture behaviour change by strain rate in Si steels

Mizuguchi, T., Oouchi, R., Ueji, R., Tanaka, Y. & Shinagawa, K., 8 17 2010, PRICM7. p. 1303-1306 4 p. (Materials Science Forum; 巻数 654-656).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

6 引用 (Scopus)

Effects of inhomogenization on sintering behavior of Ni/Al 2O3 powder mixtures

Shinagawa, K., 2 9 2010, Multiscale, Multifunctional and Functionally Graded Materials. p. 245-250 6 p. (Materials Science Forum; 巻数 631-632).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

2 引用 (Scopus)

Fatigue behavior of composite materials made from waste plastics

Hiraba, T., Ebara, R., Takeda, K., Shinagawa, K., Hirai, M., Nonomura, T. & Morimoto, I., 12 1 2010, : : Strength, Fracture and Complexity. 6, 3, p. 91-101 11 p.

研究成果: Contribution to journalArticle

Variations in sintering stress and viscosity with mixing ratio of metal/ceramic powders

Shinagawa, K., 2010, Advances in Sintering Science and Technology - A Collection of Papers Presented at the International Conference on Sintering. American Ceramic Society, p. 161-170 10 p. (Ceramic Transactions; 巻数 209).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

1 引用 (Scopus)

Resin/metal extrusion for fabricating porous aluminum

Shinagawa, K., Hirai, M., Ohara, M. & Mihara, Y., 8 1 2009, : : Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 75, 756, p. 1118-1123 6 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
2008

Shape change and pore distribution in aluminum powder compacts by graded foaming

Shinagawa, K., 2008, MetFoam 2007 - Proceedings of the 5th International Conference on Porous Metals and Metallic Foams. p. 95-98 4 p.

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

10 引用 (Scopus)

Sintering stress and viscosity of Ni/Al2O3 powder mixtures

Shinagawa, K., 3 13 2008, Multiscale and Functionally Graded Materials - Proceedings of the International Conference, FGM IX. p. 22-27 6 p. (AIP Conference Proceedings; 巻数 973).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

3 引用 (Scopus)
2007

Fatigue and tensile properties of pallets made from waste plastics

Takeda, K., Hiraba, T., Ebara, R., Shinagawa, K., Hirai, M., Nonomura, T. & Morimoto, I., 8 1 2007, : : Key Engineering Materials. 348-349, p. 653-656 4 p.

研究成果: Contribution to journalArticle

1 引用 (Scopus)
2006
2 引用 (Scopus)
4 引用 (Scopus)
2005

A microstructure based numerical simulation of microwave sintering of specialized SOFC materials

Darcovich, K., Whitfield, P. S., Amow, G., Shinagawa, K. & Miyahara, R. Y., 1 1 2005, : : Journal of the European Ceramic Society. 25, 12 SPEC. ISS., p. 2235-2240 6 p.

研究成果: Contribution to journalArticle

9 引用 (Scopus)

Influence of mixing different types of powder on microstructure and sintering behavior of compacts

Shinagawa, K., Yokota, K., Shirakawa, H., Tomino, H. & Murai, S., 8 1 2005, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 52, 8, p. 576-580 5 p.

研究成果: Contribution to journalArticle

Mechanical charactristics of metallic hollow sphere structure

Yoshimura, H., Shinagawa, K., Murakami, K., Sukegawa, Y., Harada, M. & Mihara, Y., 5 2005, : : Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 71, 5, p. 796-802 7 p.

研究成果: Contribution to journalArticle

公開
1 引用 (Scopus)

Stress analysis of powder compacts with graded structures in sintering process

Shinagawa, K. & Hirashima, Y., 12 1 2005, Functionally Graded Materials VIII, FGM2004 - Proceedings of the 8th International Symposium on Multifunctional and Functionally Graded Materials, (FGM2004). p. 477-482 6 p. (Materials Science Forum; 巻数 492-493).

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

6 引用 (Scopus)
2004

A three-dimensional dual-mechanism model of pore stability in a sintering alumina structure

Darcovich, K., Shinagawa, K. & Walkowiak, F., 5 25 2004, : : Materials Science and Engineering A. 373, 1-2, p. 107-114 8 p.

研究成果: Contribution to journalArticle

6 引用 (Scopus)

Influence of process parameters on expansion behavior of foaming glass

Shinagawa, K. & Oyashiki, Y., 1 1 2004, : : Key Engineering Materials. 274-276, I, p. 1107-1112 6 p.

研究成果: Contribution to journalArticle

2 引用 (Scopus)
2003

An experimental and numerical study of particle size distribution effects on the sintering of porous ceramics

Darcovich, K., Toll, F., Hontanx, P., Roux, V. & Shinagawa, K., 5 15 2003, : : Materials Science and Engineering A. 348, 1-2, p. 76-83 8 p.

研究成果: Contribution to journalArticle

11 引用 (Scopus)
7 引用 (Scopus)

Particle size distribution effects in an FEM model of sintering porous ceramics

Darcovich, K., Béra, L. & Shinagawa, K., 1 20 2003, : : Materials Science and Engineering A. 341, 1-2, p. 247-255 9 p.

研究成果: Contribution to journalArticle

20 引用 (Scopus)
2002

Viscoplastic stress analysis of shrinkage and warping in graded layers during sintering

Shinagawa, K. & Hirashima, Y., 1 1 2002, : : Key Engineering Materials. 233-236, II, p. 785-790 6 p.

研究成果: Contribution to journalConference article

8 引用 (Scopus)
2001
1 引用 (Scopus)
2000

Development of hybrid oxygen-iodine laser

Itami, S., Nakamura, Y., Nakamura, A., Shinagawa, K., Kihara, Y., Okamura, M., Yoshitani, E. & Fujii, H., 2000, : : Proceedings of SPIE - The International Society for Optical Engineering. 3889, p. 503-510 8 p.

研究成果: Contribution to journalConference article

11 引用 (Scopus)