Pureに変更を加えた場合、すぐここに表示されます。

研究成果 2010 2018

  • 56 引用
  • 4 h指数
  • 18 記事
  • 4 会議での発言
フィルター
会議での発言
2016

Control the deformation of MIM parts by the powder size distribution

Osada, T., Kudo, K., Hashikawa, R., Tsumori, F. & Miura, H., 1 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

研究成果: 著書/レポートタイプへの貢献会議での発言

Metal molding
Injection molding
Powders

Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kudo, K., Ishimitsu, H., Choe, J., Osada, T., Miura, H. & Shinagawa, K., 1 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

研究成果: 著書/レポートタイプへの貢献会議での発言

Fatigue of materials
Metal molding
Injection molding
Powders
Boron
2015
1 引用 (Scopus)

Improvement of fatigue strength for titanium alloy compacts by MIM

Jungho, C., Osada, T., Kudo, K., Tsumori, F. & Miura, H., 2015, Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015. Metal Powder Industries Federation

研究成果: 著書/レポートタイプへの貢献会議での発言

Metal molding
injection molding
titanium alloys
Titanium alloys
Injection molding
2010

Effect of microstructure on the rolling contact fatigue strength of 4600 steel P/M compacts

Tokuoka, T., Nakahara, Y., Kudo, K., Nishioka, T. & Miura, H., 1 1 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), 巻 3.

研究成果: 著書/レポートタイプへの貢献会議での発言

Steel
Powders
steels
microstructure
Microstructure