Pureに変更を加えた場合、すぐここに表示されます。

研究成果 1986 2019

  • 66 引用
  • 4 h指数
  • 27 記事
  • 11 会議での発言
2019
1 引用 (Scopus)

Four-dimensional observation of ductile fracture in sintered iron using synchrotron X-ray laminography

Ozaki, Y., Mugita, Y., Aramaki, M., Furukimi, O., Oue, S., Jiang, F., Tsuji, T., Takeuchi, A., Uesugi, M. & Ashizuka, K., 3 15 2019, : : Powder Metallurgy. 62, 2, p. 146-154 9 p.

研究成果: ジャーナルへの寄稿記事

Ductile fracture
Synchrotrons
Coalescence
Crack initiation
synchrotrons

Void nucleation, and growth during tensile deformation of nanoscale precipitated steel and bainitic steel

Mugita, Y., Aramaki, M., Yamamoto, M., Takeuchi, A., Takeuchi, M., Yokota, T., Funakawa, Y. & Furukimi, O., 1 1 2019, : : isij international. 59, 7, p. 1362-1368 7 p.

研究成果: ジャーナルへの寄稿記事

公開
Steel
Nucleation
Grain boundaries
Tensile testing
Synchrotron radiation
2018

Einfluss von Nitrieren-Abschrecken und Aufkohlen-Abschrecken auf die Verschleißeigenschallen von industriellem Reineisen

Aramaki, M., Kozin, M., Yoshida, K. & Furukimi, O., 6 1 2018, HTM - Journal of Heat Treatment and Materials, 73, 3, p. 131-143 13 p.

研究成果: 専門家出版物への寄稿タイプ 記事

Nitriding
Martensite
Quenching
Iron
Wear of materials

Evaluation of porosity closure during hot compression of steel by synchrotron X-ray laminography and FEM analysis

Watanabe, K., Ide, H., Nakasaki, M., Takeuchi, A., Aramaki, M. & Furukimi, O., 1 1 2018, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 104, 2, p. 65-71 7 p.

研究成果: ジャーナルへの寄稿記事

Steel
Hot pressing
Synchrotrons
closures
finite element method
1 引用 (Scopus)

Void nucleation, growth, and coalescence observed by synchrotron radiation x-ray laminography during tensile deformation of Fe–0.02 mass% N alloy

Furukimi, O., Harada, S., Mugita, Y., Aramaki, M., Yamamoto, M., Takeuchi, A., Takeuchi, M. & Funakawa, Y., 1 1 2018, : : isij international. 58, 5, p. 943-951 9 p.

研究成果: ジャーナルへの寄稿記事

Synchrotron radiation
Coalescence
Nucleation
Grain boundaries
X rays
2017

Effect of γ-phase stability on local deformation energy of α-γ duplex stainless steel

Yamamoto, M., Ochi, R., Yasuda, K., Aramaki, M., Munetoh, S. & Furukimi, O., 1 1 2017, : : Materials Transactions. 58, 10, p. 1379-1385 7 p.

研究成果: ジャーナルへの寄稿記事

Phase stability
Stainless Steel
stainless steels
Stainless steel
energy
4 引用 (Scopus)

Effects of Specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron

Takeda, Y., Kiattisaksri, C., Aramaki, M., Munetoh, S. & Furukimi, O., 1 1 2017, : : isij international. 57, 6, p. 1129-1137 9 p.

研究成果: ジャーナルへの寄稿記事

Elongation
Iron
Stainless Steel
Nucleation
Stainless steel
4 引用 (Scopus)

Void nucleation behavior of single-crystal high-purity iron specimens subjected to tensile deformation

Furukimi, O., Kiattisaksri, C., Takeda, Y., Aramaki, M., Oue, S., Munetoh, S. & Tanaka, M., 7 31 2017, : : Materials Science and Engineering A. 701, p. 221-225 5 p.

研究成果: ジャーナルへの寄稿記事

tensile deformation
voids
purity
Nucleation
Iron
4 引用 (Scopus)

Voids nucleation and growth examination during tensile deformation for IF steel by synchrotron X-ray laminography and EBSD

Furukimi, O., Takeda, Y., Yamamoto, M., Aramaki, M., Munetoh, S., Takeuchi, A., Ide, H. & Nakasaki, M., 1 1 2017, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 103, 8, p. 475-482 8 p.

研究成果: ジャーナルへの寄稿記事

tensile deformation
Steel
Synchrotrons
voids
interstitials
2016
4 引用 (Scopus)

Effects of tensile test specimen thickness on elongation and deformation energy for industrial pure iron

Takeda, Y., Kiattisaksri, C., Aramaki, M., Munetoh, S. & Furukimi, O., 1 1 2016, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 102, 10, p. 599-606 8 p.

研究成果: ジャーナルへの寄稿記事

tensile tests
elongation
Elongation
Iron
iron

Hydrogen trap in fine Ca(OH)2 powder made from scallop-shell waste

Tsuchida, H., Aramaki, M., Furukimi, O. & Kato, Y., 1 1 2016, Electrochemical Energy Summit (E2S) - Poster Session. Yoon, W-S., Liaw, B., Weber, A., Uchida, H. & Glick, M. (版). 54 版 Electrochemical Society Inc., p. 31-38 8 p. (ECS Transactions; 巻数 75, 番号 54).

研究成果: 著書/レポートタイプへの貢献会議での発言

Powders
Hydrogen
Nuclear magnetic resonance
Hydrated lime
Temperature
1 引用 (Scopus)

Wear resistance of industrial pure iron treated by nitriding and quenching followed by aging process

Furukimi, O., Katafuchi, H., Aramaki, M., Kozin, M., Oue, S., Yoshida, K., Narita, I., Yamada, N. & Yamamoto, M., 1 1 2016, : : Materials Transactions. 57, 9, p. 1587-1592 6 p.

研究成果: ジャーナルへの寄稿記事

nitriding
Nitriding
wear resistance
Wear resistance
Quenching
2015
6 引用 (Scopus)

Effect of tensile test specimen thickness on deformation energy for duplex stainless steel

Hirashima, T., Aramaki, M., Yamamoto, M., Yasuda, K., Munetoh, S. & Furukimi, O., 1 1 2015, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 101, 5, p. 308-314 7 p.

研究成果: ジャーナルへの寄稿記事

Stainless Steel
tensile tests
stainless steels
triaxial stresses
Stainless steel

FEM analysis of friction for pressing dies controlled by shot treatment

Abe, K., Fukaura, H., Aramaki, M. & Furukimi, O., 1 1 2015, HTM - Journal of Heat Treatment and Materials, 70, 1, p. 26-32 7 p.

研究成果: 専門家出版物への寄稿タイプ 記事

Oils
Friction
Finite element method
Elastic deformation
Plastic deformation
2014

Effect of number of grain on ductile fracture behavior of iron by molecular dynamics simulation

Hirashima, T., Aramaki, M., Munetoh, S. & Furukimi, O., 1 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Lubben, T., Zoch, H-W. & Schneider, R. (版). Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 477-479 3 p. (Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress).

研究成果: 著書/レポートタイプへの貢献会議での発言

Ductile fracture
Molecular dynamics
Iron
Computer simulation
Grain boundaries

Effect of tensile strain rate on ductile fracture energy for industrial pure iron

Nishimura, T., Aramaki, M., Munetoh, S., Ueji, R. & Furukimi, O., 1 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Lubben, T., Zoch, H-W. & Schneider, R. (版). Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 511-514 4 p. (Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress).

研究成果: 著書/レポートタイプへの貢献会議での発言

Fracture energy
Ductile fracture
Tensile strain
Strain rate
Iron
4 引用 (Scopus)

Examination of tensile deformation and void nucleation behaviors of duplex stainless steel using nano-indentation hardness test

Aramaki, M., Uchida, S., Yasuda, K., Oikawa, M. & Furukimi, O., 1 1 2014, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 100, 10, p. 1261-1266 6 p.

研究成果: ジャーナルへの寄稿記事

hardness tests
tensile deformation
Stainless Steel
martensitic transformation
Nanoindentation
2 引用 (Scopus)

Improvement of anti-wear property by nitriding-accelerated cooling process

Katafuchi, H., Aramaki, M., Yamada, N., Chayapiwut, N., Kabasawa, H. & Furukimi, O., 1 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 467-470 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Steel
Nitriding
Wear of materials
Cooling
Iron
2013
10 引用 (Scopus)

Local deformation energy and void formation behavior in 16%Cr ferritic steel

Furukimi, O., Niigaki, S., Yamada, N., Aramaki, M., Oue, S. & Funakawa, Y., 2 4 2013, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 99, 1, p. 60-69 10 p.

研究成果: ジャーナルへの寄稿記事

Ferritic steel
voids
steels
Coalescence
coalescing
2012
1 引用 (Scopus)

Effect of microstructure on formation of ductile fracture surface in steel plate

Fukahori, T., Suzuki, S., Yamada, N., Aramaki, M. & Furukimi, O., 1 4 2012, THERMEC 2011 Supplement. p. 678-683 6 p. (Advanced Materials Research; 巻数 409).

研究成果: 著書/レポートタイプへの貢献会議での発言

Ductile fracture
Coalescence
Microstructure
Steel
Nucleation
2 引用 (Scopus)

Improvement of die life with surface texture control and solid lubricant

Furukimi, O., Aramaki, M., Abe, K., Fukaura, H. & Yamada, N., 6 25 2012, HTM - Haerterei-Technische Mitteilungen, 67, 2, p. 153-157 5 p.

研究成果: 専門家出版物への寄稿タイプ 記事

Solid lubricants
Textures
Shot peening
Powders
Lubricants

The effect of Si on the precipitates for Nb bearing high purity ferritic stainless steel

Ito, M., Honda, Y., Aramaki, M., Kato, Y. & Furukimi, O., 2012, 18th International Federation for Heat Treatment and Surface Engineering. ASTM International, 巻 1532 STP. p. 107-112 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Bearings (structural)
Stainless Steel
Ferritic steel
Precipitates
Electron microscopes
2011
4 引用 (Scopus)

Effect of combined shot treatment and nitriding on galling property of die used for high strength steels

Aramaki, M., Yamada, N. & Furukimi, O., 7 15 2011, : : isij international. 51, 7, p. 1137-1141 5 p.

研究成果: ジャーナルへの寄稿記事

Nitriding
High strength steel
Textures
Steel sheet
Abrasion

The effect of Si on the precipitates for Nb bearing high purity ferritic stainless steel

Ito, M., Honda, Y., Aramaki, M., Kato, Y. & Furukimi, O., 3 1 2011, : : Journal of ASTM International. 8, 3

研究成果: ジャーナルへの寄稿記事

Bearings (structural)
Stainless Steel
Ferritic steel
Precipitates
Electron microscopes
2010

The effect of Si on the precipitates for nb bearing high-purity ferritic stainless steel

Ito, M., Honda, Y., Aramaki, M., Kato, Y. & Furukimi, O., 2010, 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010. 巻 5. p. 4213-4218 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Bearings (structural)
Ferritic steel
Precipitates
Electron microscopes
Stainless steel
2009
1 引用 (Scopus)

Effect of graphite diameter added on the tensile strength of Fe-Cu-C sintered material

Aramaki, M., Nakao, T., Unami, S. & Furukimi, O., 8 1 2009, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 56, 8, p. 495-501 7 p.

研究成果: ジャーナルへの寄稿記事

Graphite
Tensile strength
Powders
Microstructure
Pearlite

Effects of graphite diameter on the strength of ferrous sintered material

Nakao, T., Aramaki, M., Furukimi, O. & Unarm, S., 1 1 2009, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), p. 264-267 4 p. (Proceedings of the 17th IFHTSE Congress; 巻数 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Graphite
graphite
Pore size
porosity
pearlite
2008

Fourier analysis of ductile fracture surface for high-Cr steel

Yamada, N., Aramaki, M., Funakawa, Y., Kate, Y., Nakajima, M. & Furukimi, O., 2008, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), 巻 2. p. 533-536 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Fourier analysis
Ductile fracture
Steel
Precipitates
precipitates

The effects of microstructures on the ductile fracture surface morphology in duplex stainless steel

Honda, Y., Yamada, N., Aramaki, M., Oikawa, M. & Furukimi, O., 2008, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), 巻 2. p. 522-525 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Ductile fracture
Stainless Steel
Surface morphology
stainless steels
Stainless steel

The stability of austenite in tensile deformation and its relation to a nitriding treatment in precipitation hardened stainless steel

Ichikawa, A., Aramaki, M. & Furukimi, O., 2008, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), 巻 2. p. 506-509 4 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

tensile deformation
nitriding
Nitriding
Stainless Steel
austenite
2002

The Portevin-LeChatelier effect in Cu-Al alloy and failure of the cottrell theory

Onodera, R., Quan, X. Z. & Aramaki, M., 6 2002, : : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 66, 6, p. 627-633 7 p.

研究成果: ジャーナルへの寄稿記事

strain rate
Strain rate
solutes
occurrences
causes
2001

Characteristics of Luders deformation and their computer simulation based on a work-softening model

Onodera, R., Morita, I., Kamikihara, R. & Aramaki, M., 11 1 2001, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 87, 11, p. 41-48 8 p.

研究成果: ジャーナルへの寄稿記事

work softening
yield point
Constitutive equations
constitutive equations
computerized simulation
2000
9 引用 (Scopus)

Stress drop, Luders strain and strain rate during serrated flow

Onodera, R., Nonomura, M. & Aramaki, M., 1 1 2000, : : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 64, 12, p. 1162-1171 10 p.

研究成果: ジャーナルへの寄稿記事

strain rate
Strain rate
intervals
strain gages
Strain gages
1999

Effects of co-addition of titanium and boron on microstructure of superplastic Cr-Mo steels

Aramaki, M., Onodera, R., Era, H. & Kishitake, K., 1 1 1999, : : Materials Science and Technology. 15, 12, p. 1408-1413 6 p.

研究成果: ジャーナルへの寄稿記事

Boron
Steel
Titanium
boron
titanium
5 引用 (Scopus)

Influence of carbon content on superplastic behavior in Ti- and B-added Cr-Mo steels

Aramaki, M., Higashida, K. & Onodera, R., 1 1 1999, : : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 30, 5, p. 1185-1191 7 p.

研究成果: ジャーナルへの寄稿記事

Steel
Carbon
steels
carbon
carbides
1997
1 引用 (Scopus)

Influence of carbon content on superplastic behaviour in Ti and B doped Cr-Mo steels

Aramaki, M., Nakai, O., Onodera, R. & Higashida, K., 12 1 1997, : : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 83, 12, p. 43-48 6 p.

研究成果: ジャーナルへの寄稿記事

Steel
Carbon
steels
carbon
carbides
1990

クロムモリブデン鋼の超塑性に及ぼすTi B添加の影響

Tsushima, K., Aramaki, M. & Onodera, R., 5 1990, : : 塑性と加工. 31, p. 652-657 6 p.

研究成果: ジャーナルへの寄稿記事

1986
2 引用 (Scopus)

ELECTRICAL RESISTIVITY CHANGE BY HYDROGEN ADSORPTION IN EVAPORATED THIN FILMS OF IRON.

Aramaki, M. & Hayashi, Y., 3 1 1986, : : Nippon Kinzoku Gakkai-si. 50, 3, p. 298-303 6 p.

研究成果: ジャーナルへの寄稿記事

Hydrogen
Iron
Adsorption
iron
Thin films