• 401 引用
  • 12 h指数
1994 …2020

Research output per year

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

  • 401 引用
  • 12 h指数
  • 52 記事
  • 14 会議での発言
2020

Atmospheric corrosion protection method for corroded steel members using sacrificial anode of Al-based alloy

Yang, M., Kainuma, S., Ishihara, S., Kaneko, A. & Yamauchi, T., 2 20 2020, : : Construction and Building Materials. 234, 117405.

研究成果: ジャーナルへの寄稿記事

2019

Corrosion protection of steel members using an Al-Zn base sacrificial anode and fiber sheet in an atmospheric environment

Kainuma, S., Yang, M., Ishihara, S., Kaneko, A. & Yamauchi, T., 11 10 2019, : : Construction and Building Materials. 224, p. 880-893 14 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Fatigue crack retrofitting by closing crack surface

YuanZhou, Z., Ji, B., Fu, Z., Kainuma, S. & Tsukamoto, S., 2 2019, : : International Journal of Fatigue. 119, p. 229-237 9 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Scalable Elasticoluminescent Strain Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis

Liu, L., Xu, C. N., Yoshida, A., Tu, D., Ueno, N. & Kainuma, S., 1 2019, : : Advanced Materials Technologies. 4, 1, 1800336.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)
2018

Corrosivity evaluation of steel members near the air-liquid interface using a ground corrosion sensor

Kainuma, S. & Yang, M., 1 1 2018, Advances in Fracture and Damage Mechanics XVII. Aliabadi, F. M. H., Rodriguez-Tembleque, L. & Dominguez, J. (版). Trans Tech Publications Ltd, p. 619-624 6 p. (Key Engineering Materials; 巻数 774 KEM).

研究成果: 著書/レポートタイプへの貢献会議での発言

Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Ahn, J. H. & Jeong, Y. S., 1 25 2018, : : Structural Engineering and Mechanics. 65, 2, p. 191-201 11 p.

研究成果: ジャーナルへの寄稿記事

Fatigue Behavior Investigation and Stress Analysis for Rib-to-Deck Welded Joints in Orthotropic Steel Decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 6 1 2018, : : International Journal of Steel Structures. 18, 2, p. 512-527 16 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Structural behavior of orthotropic steel decks with artificial cracks in longitudinal ribs

Yang, M., Kainuma, S. & Jeong, Y. S., 2 1 2018, : : Journal of Constructional Steel Research. 141, p. 132-144 13 p.

研究成果: ジャーナルへの寄稿記事

6 引用 (Scopus)
2017

Deterioration behaviors of overlapping layers between Al-5Mg alloy thermal spray coating and heavy-duty paint coating

Kainuma, S., Du, J., Yang, M., Muto, K. & Miyata, H., 1 1 2017, Advances in Fracture and Damage Mechanics XVI - 16th FDM. Baragetti, S., Aliabadi, F. M. H., Mariano, P. M., Casavola, K. & Pappalettere, C. (版). Trans Tech Publications Ltd, p. 55-58 4 p. (Key Engineering Materials; 巻数 754 KEM).

研究成果: 著書/レポートタイプへの貢献会議での発言

Experimental investigation for structural parameter effects on fatigue behavior of rib-to-deck welded joints in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 9 1 2017, : : Engineering Failure Analysis. 79, p. 520-537 18 p.

研究成果: ジャーナルへの寄稿記事

18 引用 (Scopus)

Mechanoluminescent testing as an efficient inspection technique for the management of infrastructures

Yoshida, A., Liu, L., Tu, D., Kainuma, S. & Xu, C. N., 6 2017, : : Journal of Disaster Research. 12, 3, p. 506-514 9 p.

研究成果: ジャーナルへの寄稿記事

8 引用 (Scopus)
2016

Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 3 1 2016, : : Journal of Constructional Steel Research. 119, p. 113-122 10 p.

研究成果: ジャーナルへの寄稿記事

33 引用 (Scopus)

Fundamental study on anti-corrosive method with sacrificial anode for steel members using Al-Zn alloy casting plate and fiber sheet in atmospheric environment

Kainuma, S., Tsuchihashi, Y., Ishihara, S., Uchida, D., Kaneko, A. & Yamauchi, T., 1 1 2016, : : Zairyo to Kankyo/ Corrosion Engineering. 65, 9, p. 390-397 8 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Influence of size and proximity of paint coating defects on corrosion behavior of carbon steel plates

Kainuma, S., Jeong, Y. S. & Kobayashi, J., 1 1 2016, Advances in Fracture and Damage Mechanics XIV. Tonkovic, Z., Bajic, D. & Aliabadi, F. (版). Trans Tech Publications Ltd, p. 125-128 4 p. (Key Engineering Materials; 巻数 665).

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

Parametric FE analysis for fatigue behavior of rib- To-deck welded joints in orthotropic steel decks

Yang, M., Kainuma, S., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 1 1 2016, IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report. International Association for Bridge and Structural Engineering (IABSE), p. 264-268 5 p. (IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report).

研究成果: 著書/レポートタイプへの貢献会議での発言

Practical method for estimating time-dependent corrosion depth of uncoated carbon steel plates under various atmospheric environmental conditions using fe/ag galvanic couple corrosion sensor

Kainuma, S., Yamamoto, Y. & Jeong, Y. S., 1 1 2016, Advances in Fracture and Damage Mechanics XV. Toribio, J., Aliabadi, M. H. F., Mantič, V. & Sáez, A. (版). Trans Tech Publications Ltd, p. 187-190 4 p. (Key Engineering Materials; 巻数 713).

研究成果: 著書/レポートタイプへの貢献会議での発言

Relationships between Imperfections and Shear Buckling Resistance in Web Plate with Sectional Damage Caused by Corrosion

Ahn, J. H., Kainuma, S., Lee, W. H., Jeong, Y. J. & Kim, I. T., 1 1 2016, : : Advances in Materials Science and Engineering. 2016, 6467589.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Welding residual stress in roots between deck plate and U-rib in orthotropic steel decks

Kainuma, S., Jeong, Y. S., Yang, M. & Inokuchi, S., 10 1 2016, : : Measurement: Journal of the International Measurement Confederation. 92, p. 475-482 8 p.

研究成果: ジャーナルへの寄稿記事

12 引用 (Scopus)
2015

Behavior and stress of orthotropic deck with bulb rib by surface corrosion

Kainuma, S., Jeong, Y. S., Ahn, J. H., Yamagami, T. & Tsukamoto, S., 6 22 2015, : : Journal of Constructional Steel Research. 113, p. 135-145 11 p., 4239.

研究成果: ジャーナルへの寄稿記事

12 引用 (Scopus)

Evaluation of structural responses on artificial fatigue crack for bulb rib orthotropic deck

Kainuma, S., Ahn, J. H., Jeong, Y. S., Sugiyama, H. & Iwasaki, M., 1 1 2015, : : Advances in Structural Engineering. 18, 9, p. 1355-1370 16 p.

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

Fatigue behaviour of out-of-plane gusset joints with one-side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., 12 2 2015, : : Welding International. 29, 12, p. 913-921 9 p.

研究成果: ジャーナルへの寄稿記事

Stress distribution on the real corrosion surface of the orthotopic steel bridge deck

Kainuma, S., Jeong, Y. S. & Ahn, J. H., 6 1 2015, : : Steel and Composite Structures. 18, 6, p. 1479-1492 14 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)
1 引用 (Scopus)
2014

Applicability and structural response for bearing system replacement in suspension bridge rehabilitation

Kainuma, S., Ahn, J. H., Jeong, Y. S., Imamura, T. & Matsuda, T., 4 1 2014, : : Journal of Constructional Steel Research. 95, p. 172-190 19 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Fundamental study on corrosion protection effect with sacrificial anode for corroded steel members using porous sintered plate and fiber sheet in an atmospheric environment

Ishihara, S., Kainuma, S., Kinoshita, M., Uchida, D., Kaneko, A. & Yamauchi, T., 1 1 2014, : : Zairyo to Kankyo/ Corrosion Engineering. 63, 12, p. 609-615 7 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test

Kainuma, S., Jeong, Y. S. & Ahn, J. H., 4 25 2014, : : Materials Science and Engineering A. 602, p. 89-97 9 p.

研究成果: ジャーナルへの寄稿記事

14 引用 (Scopus)

Practical method for estimating corrosion depth of uncoated carbon steel using thickness of the corrosion-product layer

Kainuma, S., Yamamoto, Y., Hayashi, H. & Itoh, Y., 1 1 2014, Advances in Fracture and Damage Mechanics XII. p. 201-204 4 p. (Key Engineering Materials; 巻数 577-578).

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)
2 引用 (Scopus)
2013

Assessment of shear behaviors of a web panel with free lower boundary

Ahn, J. H., Kainuma, S., Kim, I. T. & Jeong, Y. S., 6 3 2013, Advances in Applied Materials and Electronics Engineering II. p. 120-124 5 p. (Advanced Materials Research; 巻数 684).

研究成果: 著書/レポートタイプへの貢献会議での発言

Assessment of the corrosion characteristics of the carbon steel under different atmospheric environments

Jeong, Y. S., Kainuma, S. & Ahn, J. H., 6 3 2013, Advances in Applied Materials and Electronics Engineering II. p. 116-119 4 p. (Advanced Materials Research; 巻数 684).

研究成果: 著書/レポートタイプへの貢献会議での発言

Corrosion pattern for critical shear buckling load of a web panel with local corrosion damage

Kainuma, S., Ahn, J. H. & Kim, I. T., 10 29 2013, Information Technology for Manufacturing Systems IV. p. 778-783 6 p. (Applied Mechanics and Materials; 巻数 421).

研究成果: 著書/レポートタイプへの貢献会議での発言

Experimental evaluation of shear buckling behaviors and strength of locally corroded web

Kim, I. T., Lee, M. J., Ahn, J. H. & Kainuma, S., 3 11 2013, : : Journal of Constructional Steel Research. 83, p. 75-89 15 p.

研究成果: ジャーナルへの寄稿記事

19 引用 (Scopus)

Fatigue behavior of out-of-plane gusset joints with one side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., 1 1 2013, : : Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 31, 4, p. 238-245 8 p.

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

Repair method and residual bearing strength evaluation of a locally corroded plate girder at support

Ahn, J. H., Kainuma, S., Yasuo, F. & Takehiro, I., 10 1 2013, : : Engineering Failure Analysis. 33, p. 398-418 21 p.

研究成果: ジャーナルへの寄稿記事

17 引用 (Scopus)

Residual shear strength of steel plate girder due to web local corrosion

Ahn, J. H., Kim, I. T., Kainuma, S. & Lee, M. J., 8 14 2013, : : Journal of Constructional Steel Research. 89, p. 198-212 15 p.

研究成果: ジャーナルへの寄稿記事

19 引用 (Scopus)

Shear failure behaviors of a web panel with local corrosion depending on web boundary conditions

Ahn, J. H., Kainuma, S. & Kim, I. T., 10 7 2013, : : Thin-Walled Structures. 73, p. 302-317 16 p.

研究成果: ジャーナルへの寄稿記事

13 引用 (Scopus)

Structural response of orthotropic bridge deck depending on the corroded deck surface

Jeong, Y. S., Kainuma, S. & Ahn, J. H., 3 15 2013, : : Construction and Building Materials. 43, p. 87-97 11 p.

研究成果: ジャーナルへの寄稿記事

7 引用 (Scopus)
2012

Evaluation method for corrosion depth of uncoated carbon steel and its time-dependence using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Itoh, Y., Hayashi, H. & Oshikawa, W., 12 1 2012, : : Zairyo to Kankyo/ Corrosion Engineering. 61, 12, p. 483-494 12 p.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)

Evaluation on estimation in characteristics of fatigue crack using micro-encapsulated dye mixing paint

Kainuma, S., Ahn, J. H., Jeong, Y. S. & Takahashi, H., 10 1 2012, : : Engineering Failure Analysis. 25, p. 1-12 12 p.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)
5 引用 (Scopus)

Spatial statistical analyses for time-dependent corroded surfaces of uncoated weathering steel plates in various corrosive environments

Kainuma, S. & Jeong, Y. S., 1 1 2012, Advances in Fracture and Damage Mechanics X. p. 57-60 4 p. (Key Engineering Materials; 巻数 488-489).

研究成果: 著書/レポートタイプへの貢献会議での発言

2011

Applicability of an ACM type corrosion sensor to evaluations of corrosive environments in gas piping

Ito, Y. & Kainuma, S., 2011, European Corrosion Congress 2011, EUROCORR 2011. 巻 4. p. 3290-3295 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor

Ito, Y. & Kainuma, S., 12 1 2011, 18th International Corrosion Congress 2011. p. 659-664 6 p. (18th International Corrosion Congress 2011; 巻数 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

7 引用 (Scopus)

Undamental study on corrosion protection method with sacrificial anode of steel members using porous sintered plate and fiber sheet in atmospheric environment

Kainuma, S., Utsunomiya, K., Ishihara, S., Uchida, D. & Kaneko, A., 12 1 2011, : : Zairyo to Kankyo/ Corrosion Engineering. 60, 12, p. 535-540 6 p.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)
2010

Evaluation method for time-dependent corrosion behavior of carbon steel plate using atmospheric corrosion monitoring sensor

Kainuma, S., Sugitani, K., Itoh, Y. & Kim, I. T., 1 1 2010, : : Key Engineering Materials. 417-418, p. 417-420 4 p.

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

Evaluation of stress concentration factor for corroded structural steel members in boundary with concrete

Hosomi, N. & Kainuma, S., 12 1 2010, : : Doboku Gakkai Ronbunshuu A. 66, 4, p. 613-630 18 p.

研究成果: ジャーナルへの寄稿記事

Spatial statistical analyses simulation for time-dependent corroded surfaces of carbon steel plates in various corrosive environments

Kainuma, S., Mukaigawa, Y., Itoh, Y., Jeong, Y. & Kim, I. T., 1 1 2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. Zingoni, A. (版). CRC Press/Balkema, p. 387-390 4 p. (Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010).

研究成果: 著書/レポートタイプへの貢献会議での発言

2009

Fatigue life evaluation of corroded structural steel members in boundary with concrete

Kainuma, S. & Hosomi, N., 1 1 2009, : : International Journal of Fracture. 157, 1-2, p. 149-158 10 p.

研究成果: ジャーナルへの寄稿記事

7 引用 (Scopus)