• 412 引用
  • 12 h指数
1994 …2020

Research output per year

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

  • 412 引用
  • 12 h指数
  • 52 記事
  • 14 会議での発言
会議での発言

Applicability of an ACM type corrosion sensor to evaluations of corrosive environments in gas piping

Ito, Y. & Kainuma, S., 2011, European Corrosion Congress 2011, EUROCORR 2011. 巻 4. p. 3290-3295 6 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Assessment of shear behaviors of a web panel with free lower boundary

Ahn, J. H., Kainuma, S., Kim, I. T. & Jeong, Y. S., 6 3 2013, Advances in Applied Materials and Electronics Engineering II. p. 120-124 5 p. (Advanced Materials Research; 巻数 684).

研究成果: 著書/レポートタイプへの貢献会議での発言

Assessment of the corrosion characteristics of the carbon steel under different atmospheric environments

Jeong, Y. S., Kainuma, S. & Ahn, J. H., 6 3 2013, Advances in Applied Materials and Electronics Engineering II. p. 116-119 4 p. (Advanced Materials Research; 巻数 684).

研究成果: 著書/レポートタイプへの貢献会議での発言

Corrosion and fatigue behaviors of steel plates at the boundary with concrete

Kim, I. T., Kainuma, S. & Hosomi, N., 2008, Proceedings of the 4th International Structural Engineering and Construction Conference, ISEC-4 - Innovations in Structural Engineering and Construction. 巻 1. p. 135-139 5 p.

研究成果: 著書/レポートタイプへの貢献会議での発言

Corrosion pattern for critical shear buckling load of a web panel with local corrosion damage

Kainuma, S., Ahn, J. H. & Kim, I. T., 10 29 2013, Information Technology for Manufacturing Systems IV. p. 778-783 6 p. (Applied Mechanics and Materials; 巻数 421).

研究成果: 著書/レポートタイプへの貢献会議での発言

Corrosivity evaluation of steel members near the air-liquid interface using a ground corrosion sensor

Kainuma, S. & Yang, M., 1 1 2018, Advances in Fracture and Damage Mechanics XVII. Aliabadi, F. M. H., Rodriguez-Tembleque, L. & Dominguez, J. (版). Trans Tech Publications Ltd, p. 619-624 6 p. (Key Engineering Materials; 巻数 774 KEM).

研究成果: 著書/レポートタイプへの貢献会議での発言

Deterioration behaviors of overlapping layers between Al-5Mg alloy thermal spray coating and heavy-duty paint coating

Kainuma, S., Du, J., Yang, M., Muto, K. & Miyata, H., 1 1 2017, Advances in Fracture and Damage Mechanics XVI - 16th FDM. Baragetti, S., Aliabadi, F. M. H., Mariano, P. M., Casavola, K. & Pappalettere, C. (版). Trans Tech Publications Ltd, p. 55-58 4 p. (Key Engineering Materials; 巻数 754 KEM).

研究成果: 著書/レポートタイプへの貢献会議での発言

Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor

Ito, Y. & Kainuma, S., 12 1 2011, 18th International Corrosion Congress 2011. p. 659-664 6 p. (18th International Corrosion Congress 2011; 巻数 1).

研究成果: 著書/レポートタイプへの貢献会議での発言

Influence of size and proximity of paint coating defects on corrosion behavior of carbon steel plates

Kainuma, S., Jeong, Y. S. & Kobayashi, J., 1 1 2016, Advances in Fracture and Damage Mechanics XIV. Tonkovic, Z., Bajic, D. & Aliabadi, F. (版). Trans Tech Publications Ltd, p. 125-128 4 p. (Key Engineering Materials; 巻数 665).

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

Parametric FE analysis for fatigue behavior of rib- To-deck welded joints in orthotropic steel decks

Yang, M., Kainuma, S., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 1 1 2016, IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report. International Association for Bridge and Structural Engineering (IABSE), p. 264-268 5 p. (IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report).

研究成果: 著書/レポートタイプへの貢献会議での発言

Practical method for estimating corrosion depth of uncoated carbon steel using thickness of the corrosion-product layer

Kainuma, S., Yamamoto, Y., Hayashi, H. & Itoh, Y., 1 1 2014, Advances in Fracture and Damage Mechanics XII. p. 201-204 4 p. (Key Engineering Materials; 巻数 577-578).

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

Practical method for estimating time-dependent corrosion depth of uncoated carbon steel plates under various atmospheric environmental conditions using fe/ag galvanic couple corrosion sensor

Kainuma, S., Yamamoto, Y. & Jeong, Y. S., 1 1 2016, Advances in Fracture and Damage Mechanics XV. Toribio, J., Aliabadi, M. H. F., Mantič, V. & Sáez, A. (版). Trans Tech Publications Ltd, p. 187-190 4 p. (Key Engineering Materials; 巻数 713).

研究成果: 著書/レポートタイプへの貢献会議での発言

Spatial statistical analyses for time-dependent corroded surfaces of uncoated weathering steel plates in various corrosive environments

Kainuma, S. & Jeong, Y. S., 1 1 2012, Advances in Fracture and Damage Mechanics X. p. 57-60 4 p. (Key Engineering Materials; 巻数 488-489).

研究成果: 著書/レポートタイプへの貢献会議での発言

Spatial statistical analyses simulation for time-dependent corroded surfaces of carbon steel plates in various corrosive environments

Kainuma, S., Mukaigawa, Y., Itoh, Y., Jeong, Y. & Kim, I. T., 1 1 2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. Zingoni, A. (版). CRC Press/Balkema, p. 387-390 4 p. (Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010).

研究成果: 著書/レポートタイプへの貢献会議での発言

記事

A fatigue strength evaluation method for load-carrying fillet welded cruciform joints

Kainuma, S. & Mori, T., 8 1 2006, : : International Journal of Fatigue. 28, 8, p. 864-872 9 p.

研究成果: ジャーナルへの寄稿記事

36 引用 (Scopus)

Applicability and structural response for bearing system replacement in suspension bridge rehabilitation

Kainuma, S., Ahn, J. H., Jeong, Y. S., Imamura, T. & Matsuda, T., 4 1 2014, : : Journal of Constructional Steel Research. 95, p. 172-190 19 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

A study on fatigue crack initiation point of load-carrying fillet welded cruciform joints

Kainuma, S. & Mori, T., 9 1 2008, : : International Journal of Fatigue. 30, 9, p. 1669-1677 9 p.

研究成果: ジャーナルへの寄稿記事

39 引用 (Scopus)

Atmospheric corrosion protection method for corroded steel members using sacrificial anode of Al-based alloy

Yang, M., Kainuma, S., Ishihara, S., Kaneko, A. & Yamauchi, T., 2 20 2020, : : Construction and Building Materials. 234, 117405.

研究成果: ジャーナルへの寄稿記事

Behavior and stress of orthotropic deck with bulb rib by surface corrosion

Kainuma, S., Jeong, Y. S., Ahn, J. H., Yamagami, T. & Tsukamoto, S., 6 22 2015, : : Journal of Constructional Steel Research. 113, p. 135-145 11 p., 4239.

研究成果: ジャーナルへの寄稿記事

12 引用 (Scopus)

Corrosion protection of steel members using an Al-Zn base sacrificial anode and fiber sheet in an atmospheric environment

Kainuma, S., Yang, M., Ishihara, S., Kaneko, A. & Yamauchi, T., 11 10 2019, : : Construction and Building Materials. 224, p. 880-893 14 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Development of an experimental system for fatigue-cracking from weld roots between deck plate and u-rib in orthotropic steel decks

Kainuma, S., Onoue, S., Miura, K., Inokuchi, S., Kawabata, A. & Uchida, D., 12 1 2008, : : Doboku Gakkai Ronbunshuu A. 64, 2, p. 297-302 6 p.

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

Evaluation method for corrosion depth of uncoated carbon steel and its time-dependence using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Itoh, Y., Hayashi, H. & Oshikawa, W., 12 1 2012, : : Zairyo to Kankyo/ Corrosion Engineering. 61, 12, p. 483-494 12 p.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)

Evaluation method for time-dependent corrosion behavior of carbon steel plate using atmospheric corrosion monitoring sensor

Kainuma, S., Sugitani, K., Itoh, Y. & Kim, I. T., 1 1 2010, : : Key Engineering Materials. 417-418, p. 417-420 4 p.

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Ahn, J. H. & Jeong, Y. S., 1 25 2018, : : Structural Engineering and Mechanics. 65, 2, p. 191-201 11 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

Evaluation of fatigue strength of friction stir butt-welded aluminum alloy joints inclined to applied cyclic stress

Kainuma, S., Katsuki, H., Iwai, I. & Kumagai, M., 5 1 2008, : : International Journal of Fatigue. 30, 5, p. 870-876 7 p.

研究成果: ジャーナルへの寄稿記事

24 引用 (Scopus)

Evaluation of stress concentration factor for corroded structural steel members in boundary with concrete

Hosomi, N. & Kainuma, S., 12 1 2010, : : Doboku Gakkai Ronbunshuu A. 66, 4, p. 613-630 18 p.

研究成果: ジャーナルへの寄稿記事

Evaluation of structural responses on artificial fatigue crack for bulb rib orthotropic deck

Kainuma, S., Ahn, J. H., Jeong, Y. S., Sugiyama, H. & Iwasaki, M., 1 1 2015, : : Advances in Structural Engineering. 18, 9, p. 1355-1370 16 p.

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

Evaluation on estimation in characteristics of fatigue crack using micro-encapsulated dye mixing paint

Kainuma, S., Ahn, J. H., Jeong, Y. S. & Takahashi, H., 10 1 2012, : : Engineering Failure Analysis. 25, p. 1-12 12 p.

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)

Experimental evaluation of shear buckling behaviors and strength of locally corroded web

Kim, I. T., Lee, M. J., Ahn, J. H. & Kainuma, S., 3 11 2013, : : Journal of Constructional Steel Research. 83, p. 75-89 15 p.

研究成果: ジャーナルへの寄稿記事

20 引用 (Scopus)

Experimental investigation for structural parameter effects on fatigue behavior of rib-to-deck welded joints in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 9 1 2017, : : Engineering Failure Analysis. 79, p. 520-537 18 p.

研究成果: ジャーナルへの寄稿記事

18 引用 (Scopus)

Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 3 1 2016, : : Journal of Constructional Steel Research. 119, p. 113-122 10 p.

研究成果: ジャーナルへの寄稿記事

34 引用 (Scopus)

Fatigue Behavior Investigation and Stress Analysis for Rib-to-Deck Welded Joints in Orthotropic Steel Decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., 6 1 2018, : : International Journal of Steel Structures. 18, 2, p. 512-527 16 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Fatigue behavior of butt welded joints containing inclined lack-of-penetration

Kim, I. T., Yamada, K. & Kainuma, S., 4 1 2001, : : Structural Engineering/Earthquake Engineering. 18, 1, p. 53s-62s

研究成果: ジャーナルへの寄稿記事

6 引用 (Scopus)

Fatigue behavior of corroded structural steel members in boundary with concrete

Hosomi, N. & Kainuma, S., 12 1 2008, : : Doboku Gakkai Ronbunshuu A. 64, 2, p. 333-349 17 p.

研究成果: ジャーナルへの寄稿記事

Fatigue behavior of corroded structural steel members in boundary with concrete

Kainuma, S., Hosomi, N. & Kim, I. T., 2007, : : Key Engineering Materials. 348-349, p. 245-248 4 p.

研究成果: ジャーナルへの寄稿記事

Fatigue behavior of friction stir butt-welded joints inclined to applied stress

Kainuma, S., Katsuki, H., Iwai, I., Kumagai, M. & Hino, S., 12 1 2007, : : Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 25, 1, p. 203-207 5 p.

研究成果: ジャーナルへの寄稿記事

Fatigue behavior of load-carrying fillet welded cruciform joints with plates of different thickness

Kainuma, S., Kusumoto, Y., Hosomi, N. & Kim, I. T., 11 2004, : : Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 22, 4, p. 557-564 8 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Fatigue behavior of out-of-plane gusset joints with one side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., 1 1 2013, : : Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 31, 4, p. 238-245 8 p.

研究成果: ジャーナルへの寄稿記事

Fatigue behaviour of out-of-plane gusset joints with one-side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., 12 2 2015, : : Welding International. 29, 12, p. 913-921 9 p.

研究成果: ジャーナルへの寄稿記事

Fatigue crack retrofitting by closing crack surface

YuanZhou, Z., Ji, B., Fu, Z., Kainuma, S. & Tsukamoto, S., 2 2019, : : International Journal of Fatigue. 119, p. 229-237 9 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)
8 引用 (Scopus)

Fatigue life evaluation of corroded structural steel members in boundary with concrete

Kainuma, S. & Hosomi, N., 1 1 2009, : : International Journal of Fracture. 157, 1-2, p. 149-158 10 p.

研究成果: ジャーナルへの寄稿記事

7 引用 (Scopus)
5 引用 (Scopus)
23 引用 (Scopus)

Fundamental study on anti-corrosive method with sacrificial anode for steel members using Al-Zn alloy casting plate and fiber sheet in atmospheric environment

Kainuma, S., Tsuchihashi, Y., Ishihara, S., Uchida, D., Kaneko, A. & Yamauchi, T., 1 1 2016, : : Zairyo to Kankyo/ Corrosion Engineering. 65, 9, p. 390-397 8 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Fundamental study on corrosion protection effect with sacrificial anode for corroded steel members using porous sintered plate and fiber sheet in an atmospheric environment

Ishihara, S., Kainuma, S., Kinoshita, M., Uchida, D., Kaneko, A. & Yamauchi, T., 1 1 2014, : : Zairyo to Kankyo/ Corrosion Engineering. 63, 12, p. 609-615 7 p.

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

Fundamental study on evaluation for time-dependent corrosion behavior of long steel members in marine environment

Kainuma, S., Hosomi, N., Goto, A. & Itoh, Y., 12 1 2009, : : Doboku Gakkai Ronbunshuu A. 65, 2, p. 440-453 14 p.

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)
4 引用 (Scopus)

Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test

Kainuma, S., Jeong, Y. S. & Ahn, J. H., 4 25 2014, : : Materials Science and Engineering A. 602, p. 89-97 9 p.

研究成果: ジャーナルへの寄稿記事

14 引用 (Scopus)

Mechanoluminescent testing as an efficient inspection technique for the management of infrastructures

Yoshida, A., Liu, L., Tu, D., Kainuma, S. & Xu, C. N., 6 2017, : : Journal of Disaster Research. 12, 3, p. 506-514 9 p.

研究成果: ジャーナルへの寄稿記事

9 引用 (Scopus)